EN 1014-2:2010
(Main)Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 2: Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis
Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 2: Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis
This European Standard specifies a procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis.
Holzschutzmittel - Kreosot (Teerimprägnieröl) und damit imprägniertes Holz - Probenahme und Analyse - Teil 2: Verfahren zur Probenahme von Kreosot aus imprägniertem Holz für die nachfolgende Analyse
Diese Europäische Norm legt ein Verfahren fest, eine Probe Kreosot (Teerimprägnieröl) aus imprägniertem Holz zur nachfolgenden Analyse zu erhalten.
Produits de préservation du bois - Créosote et bois créosoté - Méthodes d'échantillonnage et d'analyse - Partie 2: Procédure pour obtenir un échantillon de créosote du bois créosoté à soumettre à une analyse ultérieure
La présente norme européenne spécifie une procédure pour obtenir un échantillon de créosote du bois créosoté à soumettre à une analyse ultérieure.
Zaščitna sredstva za les - Kreozotno olje in s kreozotnim oljem zaščiten les - Metode vzorčenja in analize - 2. del: Postopek vzorčenja kreozotnega olja iz lesa, zaščitenega s kreozotnim oljem, za nadaljnjo analizo
Ta evropski standard določa postopek vzorčenja kreozotnega olja iz lesa za nadaljnjo analizo.
General Information
- Status
- Published
- Publication Date
- 08-Jun-2010
- Withdrawal Date
- 30-Dec-2010
- Technical Committee
- CEN/TC 38 - Durability of wood and derived materials
- Drafting Committee
- CEN/TC 38/WG 26 - Physical/chemical factors (analytical methods)
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 19-Nov-2020
- Completion Date
- 23-Sep-2025
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 12-Jun-2010
Overview
EN 1014-2:2010 (CEN) is the European standard that specifies a validated procedure for obtaining a representative sample of creosote from creosoted timber for subsequent chemical analysis. Part 2 of the EN 1014 series, it focuses on sampling creosoted wood, extraction of creosote and handling of the extract to support quality control, regulatory testing and laboratory determination.
Key topics and technical requirements
- Scope and objective: Obtain representative creosote samples from a defined batch or, if batch ID is unavailable, from a single piece of creosoted timber. Analysis should ideally follow sampling promptly.
- Sampling method: Remove sufficient timber from impregnated zones using procedures referenced in EN 351-2. Borings (cut to include only impregnated zone) are the preferred sampling technique.
- Sample preparation: Convert removed impregnated wood to particles appropriate for Soxhlet extraction. If stored before extraction, place samples in a glass phial with screw top and keep at ≤ 10 °C.
- Reagent: Use analytical-grade toluene (evaporation residue < 0.001 % m/m).
- Apparatus: Typical laboratory equipment plus a 250 ml round-bottom flask, heating mantle, 100 ml Soxhlet extractor, extraction thimble, Dean and Stark receiver, reflux condenser and stainless-steel wire gauze.
- Extraction procedure:
- Use ~200 ml toluene in the flask; assemble Soxhlet apparatus.
- Reflux at a rate ≥ one drop/second from the condenser tip.
- Continue reflux for a minimum of 3 hours, extending up to 6 hours until solvent in the Soxhlet is colourless.
- Distil off approximately 175 ml of toluene, evaporate residue on a water bath to obtain the creosote extract.
- Note: treated timber typically contains ~10% by mass creosote (so ~20 g wood yields ~2 g creosote).
- Reporting: A sampling report must document reference to EN 1014-2, sample ID, date, batch size, sampling procedure (EN 351-2 reference), observations and any deviations.
Applications and users
- Quality control and acceptance testing by wood preservative manufacturers and treated timber producers.
- Independent testing laboratories performing chemical analysis (benzo(a)pyrene, phenols, etc.).
- Inspectors, certification bodies, environmental and forensic labs assessing creosote content for compliance, safety and environmental monitoring.
- Useful in construction, railway, marine and utility sectors where creosoted timber is applied.
Related standards
- EN 1014-1: Procedure for sampling creosote
- EN 1014-3: Determination of benzo(a)pyrene in creosote
- EN 1014-4: Determination of water-extractable phenols
- EN 351-2: Guidance on sampling preservative-treated wood
- EN 1001-2: Terminology (vocabulary)
Keywords: EN 1014-2, creosote sampling, creosoted timber analysis, Soxhlet extraction, wood preservatives, creosote extraction procedure.
Frequently Asked Questions
EN 1014-2:2010 is a standard published by the European Committee for Standardization (CEN). Its full title is "Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 2: Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis". This standard covers: This European Standard specifies a procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis.
This European Standard specifies a procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis.
EN 1014-2:2010 is classified under the following ICS (International Classification for Standards) categories: 71.100.50 - Wood-protecting chemicals. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1014-2:2010 has the following relationships with other standards: It is inter standard links to EN 1014-2:1995. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1014-2:2010 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 1014-2:2010 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Holzschutzmittel - Kreosot (Teerimprägnieröl) und damit imprägniertes Holz - Probenahme und Analyse - Teil 2: Verfahren zur Probenahme von Kreosot aus imprägniertem Holz für die nachfolgende AnalyseProduits de préservation du bois - Créosote et bois créosoté - Méthodes d'échantillonnage et d'analyse - Partie 2 : Procédure pour obtenir un échantillon de créosote du bois créosoté à soumettre à une analyse ultérieureWood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 2: Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis71.100.50Wood-protecting chemicalsICS:Ta slovenski standard je istoveten z:EN 1014-2:2010SIST EN 1014-2:2011en,fr,de01-marec-2011SIST EN 1014-2:2011SLOVENSKI
STANDARDSIST EN 1014-2:20041DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1014-2
June 2010 ICS 71.100.50 Supersedes EN 1014-2:1995English Version
Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 2: Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis
Produits de préservation du bois - Créosote et bois créosoté - Méthodes d'échantillonnage et d'analyse -Partie 2: Procédure pour obtenir un échantillon de créosote du bois créosoté à soumettre à une analyse ultérieure
Holzschutzmittel - Kreosot (Teerimprägnieröl) und damit imprägniertes Holz - Probenahme und Analyse - Teil 2: Verfahren zur Probenahme von Kreosot aus imprägniertem Holz für die nachfolgende Analyse This European Standard was approved by CEN on 12 May 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1014-2:2010: ESIST EN 1014-2:2011
This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2010, and conflicting national standards shall be withdrawn at the latest by December 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1014-2:1995. This standard forms part of a series of standards relating to the sampling and analysis of creosote and creosoted timber. The other standards of the series are: EN 1014-1, Wood preservatives
Creosote and creosoted timber
Methods of sampling and analysis
Part 1: Procedure for sampling creosote EN 1014-3, Wood preservatives
Creosote and creosoted timber
Methods of sampling and analysis
Part 3: Determination of the benzo(a)pyrene content of creosote EN 1014-4, Wood preservatives
Creosote and creosoted timber
Methods of sampling and analysis
Part 4: Determination of the water-extractable phenols content of creosote According to the CEN/CENELEC Internal Regulations, the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...