EN 40-3-2:2000
(Main)Lighting columns - Part 3-2: Design and verification - Verification by testing
Lighting columns - Part 3-2: Design and verification - Verification by testing
This European Standard specifies the requirements for the verification of the design of steel, aluminium and concrete lighting columns by testing. It gives type tests and so does not cover testing for quality control purposes. It applies to post top lighting columns not exceeding 20 m height for post top lanterns and to lighting columns with brackets not exceeding 18 m height for side entry lanterns. The requirements for lighting columns made from materials other than concrete, steel or aluminium (for example wood, plastic and cast iron) are not specifically covered in this standard.
Lichtmaste - Bemessung und Nachweis - Teil 3-2: Nach durch Prüfung
Diese Europäische Norm enthält Anforderungen an den Nachweis durch Prüfung von Lichtmasten aus Stahl, Aluminium und Beton. Sie enthält Typprüfungen; Prüfungen zur Überwachung der Qualität sind nicht behandelt. Sie gilt für gerade Lichtmaste für Aufsatzleuchten mit einer Höhe von bis zu 20 m und für Auslegermaste für Ansatzleuchten mit einer Höhe von bis zu 18 m.
Die Anforderungen an Lichtmaste aus anderen Werkstoffen als Beton, stahl oder Aluminium (z. B. Holz, Kunststoff und Gusseisen) werden in dieser Norm nicht besonders behandelt
Diese Norm enthält Leistungsanforderungen für horizontale Lasten aus Wind. Passive Sicherheit und das Verhalten von Lichtmasten bei einem Anprall von Fahrzeugen werden nicht behandelt; für diese Lichtmasten gelten zusätzliche Anforderungen (siehe prEN40-2.1999).
Candélabres d'éclairage public - Partie 3-2: Conception et vérification - Vérification par essais
La présente norme européenne spécifie les exigences relatives à la vérification par essai de la conception des candélabres d'éclairage public en acier, en aluminium et en béton. Elle présente des essais de type et ne traite donc pas des essais effectués dans le cadre d'un contrôle qualité. Elle s'applique aux candélabres droits ne dépassant pas 20 m de haut pour les luminaires montés au sommet et aux candélabres à crosses ne dépassant 18 m de haut pour les luminaires à entrée latérale.
Drogovi za razsvetljavo - Del 3-2: Projektiranje in preverjanje - Preverjanje s preskušanjem
General Information
- Status
- Withdrawn
- Publication Date
- 15-Feb-2000
- Withdrawal Date
- 19-Feb-2013
- Technical Committee
- CEN/TC 50 - Lighting columns and spigots
- Drafting Committee
- CEN/TC 50 - Lighting columns and spigots
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 20-Feb-2013
- Completion Date
- 20-Feb-2013
- Directive
- 89/106/EEC - Construction products
Relations
- Replaced By
EN 40-3-2:2013 - Lighting columns - Part 3-2: Design and verification - Verification by testing - Effective Date
- 27-Feb-2013
- Refers
EN 40-3-3:2003 - Lighting columns - Part 3-3: Design and verification - Verification by calculation - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Nonprofit organization that performs technical evaluations of building products.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
BBA (British Board of Agrément)
UK construction product certification.
Sponsored listings
Frequently Asked Questions
EN 40-3-2:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Lighting columns - Part 3-2: Design and verification - Verification by testing". This standard covers: This European Standard specifies the requirements for the verification of the design of steel, aluminium and concrete lighting columns by testing. It gives type tests and so does not cover testing for quality control purposes. It applies to post top lighting columns not exceeding 20 m height for post top lanterns and to lighting columns with brackets not exceeding 18 m height for side entry lanterns. The requirements for lighting columns made from materials other than concrete, steel or aluminium (for example wood, plastic and cast iron) are not specifically covered in this standard.
This European Standard specifies the requirements for the verification of the design of steel, aluminium and concrete lighting columns by testing. It gives type tests and so does not cover testing for quality control purposes. It applies to post top lighting columns not exceeding 20 m height for post top lanterns and to lighting columns with brackets not exceeding 18 m height for side entry lanterns. The requirements for lighting columns made from materials other than concrete, steel or aluminium (for example wood, plastic and cast iron) are not specifically covered in this standard.
EN 40-3-2:2000 is classified under the following ICS (International Classification for Standards) categories: 91.160.20 - Exterior building lighting. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 40-3-2:2000 has the following relationships with other standards: It is inter standard links to EN 40-3-2:2013, EN 40-3-3:2003, EN 40-3-1:2000, EN 40-1:1991. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 40-3-2:2000 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/111. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 40-3-2:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Drogovi za razsvetljavo - Del 3-2: Projektiranje in preverjanje - Preverjanje s preskušanjemLichtmaste - Bemessung und Nachweis - Teil 3-2: Nach durch PrüfungCandélabres d'éclairage public - Partie 3-2: Conception et vérification - Vérification par essaisLighting columns - Part 3-2: Design and verification - Verification by testing93.080.40Street lighti
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...