iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1352:1996

(Main)

Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure

Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure

This European Standard specifies a method of determining the static static modulus of elasticity in compression of autoclaved aerated concrete (AAC) or lightweight aggregate with open structure (LAC) according to prEN 1520.

Bestimmung des statischen Elastizitätsmodules unter Druckbeanspruchung von dampfgehärtetem Porenbeton und von haufwerksporigem Leichtbeton

Diese Europäische Norm legt ein Verfahren zur Bestimmung des statischen Elastizitätsmoduls unter Drudkbeanspruchung von dampfgehärtetem Porenbeton (AAC) oder von haufwerksporigem Leichtbeton (LAC) nach prEN 1520.

Détermination du module d'élasticité statique en compression du béton cellulaire autoclavé et du béton de granulats légers à structure ouverte

La présente norme européenne spécifie une méthode permettant de déterminer le module d'élasticité statique en compression du béton cellulaire autoclavé (AAC) ou du béton de granulats légers à structure ouverte (LAC), conformément au prEN 1520.

Določevanje statičnih modulov elastičnosti pri tlačnem preskusu avtoklaviranega celičastega betona ali betona iz lahkega agregata z odprto strukturo

General Information

Status
Published
Publication Date
10-Dec-1996
Withdrawal Date
29-Jun-1997
ICS
91.100.30 - Concrete and concrete products
Technical Committee
CEN/TC 177 - Prefabricated reinforced components of autoclaved aerated concrete or light-weight aggregate concret
Drafting Committee
CEN/TC 177/WG 3 - Test methods
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
05-Sep-2022
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/100 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on precast concrete products
Ref Project
SIST EN 1352:2001 - Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure

Buy Standard

EN 1352:2001EN 1352:2001
PreviousNext
Standard
EN 1352:2001
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.YWRNODYLUDQHJDXURBestimmung des statischen Elastizitätsmodules unter Druckbeanspruchung von dampfgehärtetem Porenbeton und von haufwerksporigem LeichtbetonDétermination du module d'élasticité statique en compression du béton cellulaire autoclavé et du béton de granulats légers a structure ouverteDetermination of static modulus of elasticity under compression of autoclaved aerated con
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12602:2016(Main)
Prefabricated reinforced components of autoclaved aerated concrete
SIST EN 12602:2017

This European Standard is for prefabricated reinforced components of autoclaved aerated concrete to be used in building construction for:
a)   Structural elements:
-   loadbearing wall components;
-   retaining wall components;
-   roof components;
-   floor components;
-   linear components (beams and piers).
b)   Non-structural elements:
-   non-loadbearing wall components (partition walls);
-   cladding components (without fixtures) intended to be used for external facades of buildings;
-   small box culverts used to form channels for the enclosure of services;
-   components for noise barriers.
Depending on the type and intended use of elements for which the components are utilized, the components can be applied - in addition to their loadbearing and encasing function - for purposes of fire resistance, sound insulation and thermal insulation indicated in the relevant clauses of this European Standard.
Components covered by this standard are only intended to be subjected to predominantly non-dynamic actions, unless special measures are introduced in the relevant clauses of this European Standard.
The term "reinforced" relates to reinforcement used for both structural and non-structural purposes.
This European Standard does not cover:
-   rules for the application of these components in structures;
-   joints (except their strength and integrity E of resistance to fire);
-   fixtures;
-   finishes for external components, such as tiling.
NOTE   AAC components may be used in noise barriers if they are designed to fulfil also the requirements of EN 14388.

  • Standard
    180 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1520:2011(Main)
Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
SIST EN 1520:2011

This European Standard is for prefabricated components of lightweight aggregate concrete (LAC) with open structure and with structural or non-structural reinforcement intended to be used in building construction
a)   for structural elements:
-   loadbearing wall components (solid, hollow core or multilayer);
-   retaining wall components (solid) with or without surcharge loading;
-   roof components (solid, hollow core or multilayer);
-   floor components (solid, hollow core or multilayer);
-   linear components (beams or piers).
b)    for non-structural elements:
-   non-loadbearing wall components (e.g. for partition walls);
-   cladding components (without fixtures) intended to be used for external facades of buildings;
-   small box culverts used to form channels for the enclosure of services;
-   components for noise barriers.
NOTE 1   In addition to their loadbearing and encasing function, components can also be used to provide fire resistance, sound insulation and thermal insulation.
Components covered by this European Standard are only intended to be subjected to predominantly non-dynamic actions, unless special measures are introduced in the relevant clauses of this European Standard.
The term "reinforced" relates to reinforcement used for both structural and non-structural purposes.
This European Standard does not cover:
-   rules for the application of these components in structures;
-   joints (except their strength);
-   fixtures;
-   finishes for external components, such as tiling.
NOTE 2   LAC components can be used in noise barriers if they are designed to fulfil also the requirements of EN 14388.

  • Standard
    109 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12269-2:2010(Main)
Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test - Part 2: Long term test
SIST EN 12269-2:2010

This document specifies a method of determining the long term bond behaviour between reinforcing bars and autoclaved aerated concrete (AAC) in prefabricated reinforced components according to EN 12602. The test method is conceived to obtain values for the long term bond strength fb,l which are obtained in a final short term test. The test is performed for different combinations of AAC type, bar shape, and corrosion protection systems.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15304:2010(Main)
Determination of the freeze-thaw resistance of autoclaved aerated concrete
SIST EN 15304:2010

This document specifies a method of determining the freeze-thaw resistance of autoclaved aerated concrete manufactured according to EN 12602 or EN 771-4.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15361:2007(Main)
Determination of the influence of the corrosion protection coating on the anchorage capacity of the transverse anchorage bars in prefabricated reinforced components of autoclaved aerated concrete
SIST EN 15361:2008

This document specifies a pull-out test method for the verification of the applicability of the declared outer diameter of the transverse bars with corrosion protection coating tot,g in the calculation of the anchorage capacity of transverse anchorage bars (see A.10.3 in prEN 12602:2006) in prefabricated reinforced components of autoclaved aerated concrete (AAC).

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1739:2007(Main)
Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with open structure
SIST EN 1739:2007

This European Standard specifies methods of determining the shear strength for in-plane forces of joints between prefabricated components made of autoclaved aerated concrete (AAC) according to prEN 12602 or lightweight aggregate concrete with open structure (LAC) according to EN 1520.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 680:2005(Main)
Determination of the drying shrinkage of autoclaved aerated concrete
SIST EN 680:2006

This Euopean Standard specifies a method for measuring the relative length changes due to drying (drying shrinkage) of autoclaved aerated concrete manufactured according to EN 771-4 or prEN 12602. The shrinkage characteristics determined according to this method are the following: The conventional reference value of drying shrinkage is the relative length change between two specified moisture contents. The total value of drying shrinkage is the relative length change due to drying from the saturated state until reaching constant length under specified climatic conditions. Other drying shrinkage values may be determined between other parameters to meet other specified national requirements.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 679:2005(Main)
Determination of the compressive strength of autoclaved aerated concrete
SIST EN 679:2005

This European Standard specifies the procedure for the determination of the compressive strength of autoclaved aerated concrete.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1354:2005(Main)
Determination of compressive strength of lightweight aggregate concrete with open structure
SIST EN 1354:2005

This European Standard specifies a method of determining the compressive strength of lightweight aggregate concrete with open structure (LAC) according to EN 1520.
The reference test method uses test specimens (cores or cubes) taken from prefabricated components.
Test specimens cast separately in moulds may also be used. This alternative procedure is described in Annex A.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12269-1:2000(Main)
Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the "beam test" - Part 1: Short term test
SIST EN 12269-1:2001

This European Standard specifies a method of determining the bond behaviour between reinforcing bars and autoclaved aerated concrete (AAC) in prefabricated reinforced components according to prEN 12602. The test method is conceived to obtain values for the short term bond strength, tbm, with different combinations of concrete type, bar shape and corrosion protection system.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day