iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM D6687-02

(Guide)

Standard Guide for Testing Printing Ink Vehicles and Components Thereof

Standard Guide for Testing Printing Ink Vehicles and Components Thereof

SCOPE
1.1 This guide covers a list of test methods, practices, guides, and specifications that can be used for the testing and evaluation of printing ink vehicles and components thereof (see Table 1).
1.2 This guide includes methods that were developed to test impact and non-impact inks and vehicles associated with letterpress, lithography, flexography and gravure. Tests on raw materials and analytical tests in general have been included.
1.3 Other ASTM standards not specified here may also be applicable.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

General Information

Status
Historical
Publication Date
09-May-2002
ICS
37.100.10 - Reproduction equipment
Technical Committee
D01 - Paint and Related Coatings, Materials, and Applications
Drafting Committee
D01.37 - Ink Vehicles
Current Stage
Ref Project

Relations

Replaces
ASTM D6687-01 - Standard Guide for Testing Printing Ink Vehicles and Components Thereof
Effective Date
10-May-2002
Replaced By
ASTM D6687-04 - Standard Guide for Testing Printing Ink Vehicles and Components Thereof
Effective Date
01-Jun-2004
Referred By
ASTM D7188-05(2019) - Standard Terminology for Printing Inks, Materials, and Processes
Effective Date
10-May-2002

Buy Standard

ASTM D6687-02 - Standard Guide for Testing Printing Ink Vehicles and Components ThereofASTM D6687-02 - Standard Guide for Testing Printing Ink Vehicles and Components Thereof
PreviousNext
Guide
ASTM D6687-02 - Standard Guide for Testing Printing Ink Vehicles and Components Thereof
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: D 6687 – 02
Standard Guide for
1
Testing Printing Ink Vehicles and Components Thereof
This standard is issued under the fixed designation D 6687; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope 2.1.1 printing ink, n—a colored or pigmented liquid or paste
composition that is applied by printing machinery.
1.1 This guide covers a list of test methods, practices,
2.1.1.1 Discussion—Printing inks may contain vehicles,
guides, and specifications that can be used for the testing and
colorants, waxes, solvents, and other additives. Bulk inks are
evaluation of printing ink vehicles and components thereof (see
tested for dispersion, tinting strength, density, heat and storage
Table 1).
stability, rheology, and printing properties.
1.2 This guide includes methods that were developed to test
2.1.2 vehicle, n—the portion of a printing ink that excludes
impact and non-impact inks and vehicles associated with
the colorant.
letterpress, lithography, flexography and gravure. Tests on raw
2.1.2.1 Discussion—Ink vehicles typically include the resin/
materials and analytical tests in general have been included.
solvent portion of the printing ink. Other printing ink additives,
1.3 Other ASTM standards not specified here may also be
generally not included in the vehicle, are waxes, antioxidants
applicable.
and driers.
1.4 This standard does not purport to address all of the
safety concerns, if any, associated with its use. It is the
3. Test Categories
responsibility of the user of this standard to establish appro-
3.1 For convenience in selection, the test methods, prac-
priate safety and health practices and determine the applica-
tices, guides, and specifications listed in this guide are listed
bility of regulatory requirements prior to use.
numerically (see Table 1) and by property of interest (see Table
2. Terminology 2).
2.1 Definitions:
4. Precision and Bias
4.1 If available, precision for each test method listed can be
found in the latest revision of that test method.
1
This guide is under the jurisdiction of ASTM Committee D01 on Paint and
Related Coatings, Materials, and Applications and is the direct responsibility of
5. Keywords
Subcommittee D01.37 on Ink Vehicles.
5.1 printing inks; printing ink vehicles; test methods and
Current edition approved May 10, 2002. Published July 2002. Originally
published as D 6687 - 01. Last previous edition D 6687 - 01. practices (tabulation of); vehicles
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
D 6687
TABLE 1 Numerical Listing of Ink Vehicle Related Standards
ASTM Designation Volume Title
D 16 06.01 Terminology for Paint, Related Coatings, Materials and Applications
D 56 05.01 Test Method for Flash Point by Tag Closed Tester
D 86 05.01 Test Method for Distillation of Petroleum Products at Atmospheric Pressure
D 93 05.01 Test Method for Flash Point by Pensky-Martens Closed Cup Tester
D 154 06.03 Guide for Testing Varnishes
D 445 05.01 Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
D 562 06.01 Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using the Stormer Viscometer
D 611 05.01 Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
D 971 10.03 Test Method for Interfacial Tension of Oil Against Water by the Ring Method
D 1200 06.01 Test Method for Viscosity by Ford Viscosity Cup
D 1259 06.01 Test Method for Nonvolatile Content of Resin Solutions
D 1310 06.01 Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
D 1331 15.04 Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents
D 1353 06.04 Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
D 1475 06.01 Test Method for Density of Liquid Coatings, Inks, and Related Products
D 1544 06.01 Test Method for Color of Transparent Liquids (Gardner Color Scale)
D 1545 06.03 Test Method for Viscosity of Transparent Liquids by Bubble Time Method
D 1639 06.03 Test Method for Acid Value of Organic Coating Materials
D 1725 06.03 Test Method for Viscosity of Resin Solutions
D 1963 06.03 Test Method for Specific Gravity of Drying Oils, Varnishes, Resins, and Related Materials at 25/25°C
D 2074 06.03 Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method
D 2196 06.01 Test Methods
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM D7805-13(2021)(Terminology)
Standard Terminology for Printing Ink Vehicles and Related Materials

SIGNIFICANCE AND USE
3.1 A common set of definitions is essential to improve communication and avoid misunderstanding among manufacturers of printing ink, printing ink vehicles, resins, solvents, oils and all other components of printing ink vehicles.
SCOPE
1.1 This standard contains the definitions of terms as used in reference to printing ink vehicles and related materials.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    5 pages
    English language
    sale 15% off
ASTM
ASTM D6687-07(2020)(Guide)
Standard Guide for Testing Printing Ink Vehicles and Components Thereof

ABSTRACT
This guide covers a list of test methods, practices, guides, and specifications that can be used for the testing and evaluation of printing ink vehicles and their components thereof. Included here are methods that were developed to test impact and non-impact inks and vehicles associated with letterpress, lithography, flexography and gravure. Tests on raw materials and analytical tests in general have been included as well.
SCOPE
1.1 This guide covers a list of test methods, practices, guides, and specifications that can be used for the testing and evaluation of printing ink vehicles and components thereof (see Table 1).2  
1.2 This guide includes methods that were developed to test impact and non-impact inks and vehicles associated with letterpress, lithography, flexography and gravure. Tests on raw materials and analytical tests in general have been included.  
1.3 Other ASTM standards not specified here may also be applicable.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    4 pages
    English language
    sale 15% off
ASTM
ASTM D5181-09(2017)(Test Method)
Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester

SIGNIFICANCE AND USE
5.1 Abrasion resistance during transport and storage is essential to prevent marring of type matter, designs, or protective coatings on the exterior of labels and other printed materials. Recognizing that the actual amount of abrasion occurring in the field depends on relative humidity, temperature, tightness of packing, and a host of other variables, this test method provides a rapid means for comparing the abrasion resistance of test surfaces under laboratory conditions. It is useful for specification acceptance between the supplier and the customer.  
5.2 This test method can also be used to evaluate the relative abrasion resistance of printed inks, varnishes, laminates and substrates, and the abrasiveness of inks.
SCOPE
1.1 This test method covers the procedure for determining the abrasion resistance of printed matter using a GA-CAT Comprehensive Abrasion Tester.  
1.2 This test method is applicable to packaging labels, book, catalog, and magazine covers, bar codes, corrugated boxes, and other containers having applied graphics on any flat substrate. It is not recommended for powder coatings.  
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D7805-13(2021)(Terminology)
Standard Terminology for Printing Ink Vehicles and Related Materials

SIGNIFICANCE AND USE
3.1 A common set of definitions is essential to improve communication and avoid misunderstanding among manufacturers of printing ink, printing ink vehicles, resins, solvents, oils and all other components of printing ink vehicles.
SCOPE
1.1 This standard contains the definitions of terms as used in reference to printing ink vehicles and related materials.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    5 pages
    English language
    sale 15% off
ASTM
ASTM D6687-07(2020)(Guide)
Standard Guide for Testing Printing Ink Vehicles and Components Thereof

ABSTRACT
This guide covers a list of test methods, practices, guides, and specifications that can be used for the testing and evaluation of printing ink vehicles and their components thereof. Included here are methods that were developed to test impact and non-impact inks and vehicles associated with letterpress, lithography, flexography and gravure. Tests on raw materials and analytical tests in general have been included as well.
SCOPE
1.1 This guide covers a list of test methods, practices, guides, and specifications that can be used for the testing and evaluation of printing ink vehicles and components thereof (see Table 1).2  
1.2 This guide includes methods that were developed to test impact and non-impact inks and vehicles associated with letterpress, lithography, flexography and gravure. Tests on raw materials and analytical tests in general have been included.  
1.3 Other ASTM standards not specified here may also be applicable.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    4 pages
    English language
    sale 15% off
ASTM
ASTM D5375/D5375M-98(2019)(Test Method)
Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock

SIGNIFICANCE AND USE
5.1 These test methods are a tool for development and quality assurance use. Given a specific pressure-sensitive label and liner and a requirement in terms of the minimum for maximum peel value expected for this liner removal from the label, the data from the test can be used in conjunction with acceptance criteria.
SCOPE
1.1 These test methods cover the measurement of the adherence of the release liner to the adhesive of a pressure-sensitive adhesive label.  
1.2 These test methods provide means of assessing the uniformity of the adhesion to the liner of a given type of pressure-sensitive label. The assessment may be within a sheet or roll between sheets or rolls or between production lots.  
1.3 Variation in the label backing, liner, liner release coating, adhesive, and adhesive coating weight, affect the response. Therefore, these methods cannot be used to pinpoint the specific cause(s) of nonuniformity.  
1.4 These test methods may not be appropriate to test labels having either relatively stiff backings or stiff liners, or backings showing high stretch at low forces. These characteristics will result in a high variability of the test response that is not a true indication of the real nature of the adhesive bond.  
1.5 The values stated in either SI or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system must be used independently, without combining values in any way.  
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM D5264-98(2019)(Practice)
Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester

SIGNIFICANCE AND USE
5.1 Abrasion resistance is a desirable and sometimes critical property of printed materials. Abrasion damage can occur during shipment, storage, handling, and end use. The result is a significant decrease in product appearance and legibility of product information. The amount of abrasion damage to a printed substrate is dependent on shipping conditions, possibly temperature and humidity, time, and many other variables. This practice provides a way of comparing abrasion resistance of printed materials under laboratory conditions.  
5.2 This practice also can be used to evaluate the relative abrasion resistance of printed inks, coatings, laminates, and substrates.  
5.3 This practice can be modified to measure the effects of the product (detergent powder, food, beverages, etc.) on abrasion resistance, as may occur in spillage or leakage in transit.  
5.4 This practice can provide a reasonably simple procedure that can be used by both the buyer and the seller of printed materials to determine if the product offered for sale meets some predetermined standard for abrasion or scuff resistance.
SCOPE
1.1 This practice covers a procedure for determining the abrasion resistance of printed materials using the Sutherland Rub Tester, or its equivalent, equipped with full-width rubber pads and using standardized receptors.  
1.2 This practice is applicable to labels, folding cartons, corrugated boxes, inserts, circulars, and other packaging materials having applied graphics on a flat substrate.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D5181-09(2017)(Test Method)
Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester

SIGNIFICANCE AND USE
5.1 Abrasion resistance during transport and storage is essential to prevent marring of type matter, designs, or protective coatings on the exterior of labels and other printed materials. Recognizing that the actual amount of abrasion occurring in the field depends on relative humidity, temperature, tightness of packing, and a host of other variables, this test method provides a rapid means for comparing the abrasion resistance of test surfaces under laboratory conditions. It is useful for specification acceptance between the supplier and the customer.  
5.2 This test method can also be used to evaluate the relative abrasion resistance of printed inks, varnishes, laminates and substrates, and the abrasiveness of inks.
SCOPE
1.1 This test method covers the procedure for determining the abrasion resistance of printed matter using a GA-CAT Comprehensive Abrasion Tester.  
1.2 This test method is applicable to packaging labels, book, catalog, and magazine covers, bar codes, corrugated boxes, and other containers having applied graphics on any flat substrate. It is not recommended for powder coatings.  
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM B637-23(Specification)
Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service

ABSTRACT
This specification covers hot- and cold-worked precipitation-hardenable nickel alloy rod, bar, forgings, and forging stock for high-temperature service. Chemical analysis shall be performed on the alloy and shall conform to the chemical composition requirement in carbon, manganese, silicon, phosphorus, sulfur, chromium, cobalt, molybdenum, columbium, tantalum, titanium, aluminum, zirconium, boron, iron, copper, and nickel. The material shall follow recommended annealing treatment, solution treatment, stabilizing treatment, and precipitation hardening treatment. Tension testing, hardness testing and stress-rupture testing shall be performed on the material and shall comply to the required tensile strength, yield strength, elongation, reduction in area, and Brinell hardness.
SCOPE
1.1 This specification2 covers hot- and cold-worked precipitation-hardenable nickel alloy rod, bar, forgings, and forging stock for moderate or high temperature service (Table 1).  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    7 pages
    English language
    sale 15% off
  • Technical specification
    7 pages
    English language
    sale 15% off
ASTM
ASTM C596-23(Test Method)
Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement

SIGNIFICANCE AND USE
4.1 This test method establishes a selected set of conditions of temperature, relative humidity and rate of evaporation of the environment to which a mortar specimen of stated composition shall be subjected for a specified period of time during which its change in length is determined and designated “drying shrinkage.”  
4.2 The drying shrinkage of mortar as determined by this test method has a linear relation to the drying shrinkage of concrete made with the same cement and exposed to the same drying conditions.4 Hence this test method may be used when it is desired to develop data on the effect of a hydraulic cement on the drying shrinkage of concrete made with that cement.
SCOPE
1.1 This test method determines the change in length on drying of mortar bars containing hydraulic cement and graded standard sand.  
1.2 The values stated in SI units are to be regarded as standard. When combined standards are referenced, the selection of measurement system is at the user’s discretion subject to the requirements of the referenced standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Warning—Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure).2  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off