iTeh Standards logo
EURUSD
Your shopping cart is empty.

M/258 - Pb, Cd, As & Ni in ambiant air

Standardization mandate to CEN and CENELEC for standard measuring methods of Pb, Cd, As, Ni in ambiant air

General Information

Organization
CEN - CEN European Committee for Standardization
Status
Confirmed
Resolution Reference
CEN/BT C154/1997
Resolution Date
02-Dec-1997
Type Of Decision
(Dis-)Approval of mandate

Frequently Asked Questions

A European Standardization Mandate is a formal request from the European Commission to the European Standardization Organizations (CEN, CENELEC, and ETSI) to develop European standards (ENs) in support of EU legislation and policies. Mandates are issued under Regulation (EU) No 1025/2012 and help ensure that products and services meet the essential requirements set out in EU directives and regulations.

M/258 is a European Standardization Mandate titled "Standardization mandate to CEN and CENELEC for standard measuring methods of Pb, Cd, As, Ni in ambiant air". Standardization mandate to CEN and CENELEC for standard measuring methods of Pb, Cd, As, Ni in ambiant air There are 4 standards developed under this mandate.

Standards developed in response to a mandate and cited in the Official Journal of the European Union become "harmonized standards". Products manufactured in compliance with harmonized standards benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation, facilitating CE marking and market access across the European Economic Area.

Standardization Organization
ICS
Technical Committee
Directive
50
SIST
SIST EN 14902:2005/AC:2007(Amendment)
Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
EN 14902:2005/AC:2006

TC - Modification to Equation 5

  • Corrigendum
    2 pages
    English, French and German language
    e-Library read for
    1 day
CEN
EN 14902:2005/AC:2006(Corrigendum)
Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
SIST EN 14902:2005/AC:2007

TC - Modification to Equation 5

  • Corrigendum
    2 pages
    English, French and German language
    e-Library read for
    1 day
SIST
SIST EN 14902:2005(Main)
Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
EN 14902:2005

This European Standard specifies a method for the determination of particulate lead (Pb), cadmium (Cd), arsenic (As) and nickel (Ni) in ambient air that can be used in the framework of the European Council Directive on Ambient Air Quality Assessment and Management [1] and the 1st [2] and 4th [3] Daughter Directives. Performance requirements with which the method has to comply are specified in this European Standard. The performance characteristics of the method were determined in comparative field validation tests carried out at four European locations (see [4]).
This European Standard specifies a method for sampling of Pb, Cd, As and Ni as part of the PM10 aerosol, microwave digestion of the samples and analysis by graphite furnace atomic absorption spectrometry or by inductively coupled plasma (quadrupole) mass spectrometry.
This European Standard is applicable for the measurement of Pb, Cd, As and Ni as part of the PM10 aerosol fraction in the concentration ranges listed in Table 1.
Table 1 - Working ranges of the method in ng/m³
   From   To
Pb   1   4 000
Cd   0,1   50
As   0,5   350
Ni   2   100
The actual lower limits of the working ranges depend upon the variability of the laboratory filter blank (5.3.1). The lower limits of the working ranges given in Table 1 are expected values based upon performance achieved in the field validation tests. Similarly the upper limits of the working ranges have been set arbitrarily based upon the maximum daily values measured during the field validation tests. The method can be applied to higher concentrations provided the PM10 collection characteristics of the sampler are not compromised.

  • Standard
    54 pages
    English language
    e-Library read for
    1 day
CEN
EN 14902:2005(Main)
Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
SIST EN 14902:2005

This European Standard specifies a method for the determination of particulate lead (Pb), cadmium (Cd), arsenic (As) and nickel (Ni) in ambient air that can be used in the framework of the European Council Directive on Ambient Air Quality Assessment and Management [1] and the 1st [2] and 4th [3] Daughter Directives. Performance requirements with which the method has to comply are specified in this European Standard. The performance characteristics of the method were determined in comparative field validation tests carried out at four European locations (see [4]).
This European Standard specifies a method for sampling of Pb, Cd, As and Ni as part of the PM10 aerosol, microwave digestion of the samples and analysis by graphite furnace atomic absorption spectrometry or by inductively coupled plasma (quadrupole) mass spectrometry.
This European Standard is applicable for the measurement of Pb, Cd, As and Ni as part of the PM10 aerosol fraction in the concentration ranges listed in Table 1.
Table 1 - Working ranges of the method in ng/m³
   From   To
Pb   1   4 000
Cd   0,1   50
As   0,5   350
Ni   2   100
The actual lower limits of the working ranges depend upon the variability of the laboratory filter blank (5.3.1). The lower limits of the working ranges given in Table 1 are expected values based upon performance achieved in the field validation tests. Similarly the upper limits of the working ranges have been set arbitrarily based upon the maximum daily values measured during the field validation tests. The method can be applied to higher concentrations provided the PM10 collection characteristics of the sampler are not compromised.

  • Standard
    54 pages
    English language
    e-Library read for
    1 day
50