97.220.99 - Other sports equipment and facilities
ICS 97.220.99 Details
Other sports equipment and facilities
Weitere Sportgerate und -anlagen
Autres équipements et installations de sports
Druga športna oprema in pripomočki
General Information
Frequently Asked Questions
ICS 97.220.99 is a classification code in the International Classification for Standards (ICS) system. It covers "Other sports equipment and facilities". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 51 standards classified under ICS 97.220.99 (Other sports equipment and facilities). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
SCOPE
1.1 This practice applies to the classification, design, manufacture, construction, auditing, major modification, and operation of water slide systems. Water slide systems shall be defined as rides intended for use by riders in bathing attire where the action of the ride involves possible and purposeful immersion of the rider's body either in whole or in part in water, and uses circulating water to mobilize or lubricate the rider’s transportation along a purpose built path. This includes slides used with or without vehicles as defined below. The terms water slides, waterslides, and slides shall be considered equivalent when used in this practice.
1.1.1 Owner/operator requirements of this standard are required of all water slide systems regardless of date of construction.
1.1.2 The design, manufacture and construction of an existing water slide or portions of a water slide system unaffected by a major modification shall meet the standard requirements in existence at the time of the construction.
1.2 For the purposes of this practice, a water slide system includes:
1.2.1 The flume,
1.2.2 The water-circulation system,
1.2.3 The starting platform with associated means of access and egress,
1.2.4 The structural supports,
1.2.5 Vehicles or other aquatic accessories that are part of the water slide as defined by the manufacturer, and
1.2.6 Means of slide termination.
1.3 This practice shall not apply to:
1.3.1 Any water slides installed in private residences,
1.3.2 Water flume amusement rides where contact with water is merely incidental (for example, log flume rides, shoot-the-chutes),
1.3.3 Amusement rides and devices whose design criteria are specifically addressed in another ASTM standard,
1.3.4 Lazy river type attractions operating at constant elevation, constructed in the ground,
1.3.5 Inflatable water slides (constant air supply) that are mounted on land (refer to Practice F2374-22 for the requirements of these types of water slides),
1.3.6 Inflatable water slides (captured air) that are floating on a body of water (refer to EN/ISO 25649-2017, parts 1 through 7), and
1.3.7 Water slides less than 6 ft tall. (Refer to Practice F2461-20a for the requirements of slides less than 6 ft tall.)
1.4 Pre-existing designs manufactured after the effective date of publication of this practice if the design is service proven or previously compliant, as defined in Terminology F747-22, and the manufacturer provides:
1.4.1 A historical summary of the water slide, or major modification as defined in Terminology F747-22, and
1.4.2 A statement that the design is service proven or previously compliant. Water slides and major modifications to water slides may qualify as previously compliant for five years following the date of publication of this practice. Thereafter, water slides and major modifications to water slides must qualify as service proven or meet the requirements of this practice.
1.4.3 Service proven or previously compliant designs shall comply with Section 4.
1.5 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
Note 1: The conversion factor from inch-pound to metric units is 1 in. = 25.4 mm, and 1 lb = 4.4482 N.
1.6 This practice includes an Appendix, which provides additional information to enhance the user's understanding of and application of the criteria presented in this practice, for example, rationale, background, drawings, interpretation, or commentary. The information in the Appendix shall not be considered a mandatory part of this practice.
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.8 This intern...
- Standard13 pagesEnglish languagesale 15% off
- Standard13 pagesEnglish languagesale 15% off
ABSTRACT
This specification covers warnings used on paintball marker accessories used in the sport of paintball. It states that all of the paintball marker accessories for use in the sport of paintball shall include a cautionary statement which prominently and durably conveys certain information on the instruction sheet, the packaging, or the product itself, or a combination thereof.
SCOPE
1.1 This specification covers warnings used on paintball marker accessories used in the sport of paintball. The warnings contained in this standard are intended for products that do not have individual ASTM standards which contain product specific warnings.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Technical specification2 pagesEnglish languagesale 15% off
ABSTRACT
This specification covers low velocity projectile (LVP) markers that eject a low velocity resilient material (LVRM) projectile using compressed air, compressed gas, or a combination of both. Included in this specification are performance requirements and test methods for LVP markers as well as the minimum warnings and instructions that need to be provided in literature, on labels, on packaging, and on the marker itself. The LVP markers shall be manufactured to operate only in semi-automatic or pump mode and with exposed edges that shall be smooth and free of sharp edges and burrs. LVP markers shall be provided with a disabling device which shall keep it from firing and with a provision against accidental discharge. The markers shall undergo tests for disabling device, accidental discharge, barrel blocking device, and impact, and shall conform to the requirements specified.
SCOPE
1.1 This specification covers low velocity projectile markers (herein referred to as LVP marker) that propel a low velocity resilient material projectile (herein referred to as LVRM projectile as defined in Specification F2573) by means of energy released by compressed air, compressed gas, or a combination thereof, with velocity not to exceed 53.34 m/s (175 ft/s).
1.2 LVRM projectiles are made of a resilient material and have a diameter no smaller than 20 mm (0.7874 in.) and no greater than 30 mm (1.18 in.). The hardness of the LVRM projectile is to be no greater than 75 Shore 00. The weight of the LVRM projectile is not to exceed 4.0 g.
1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.
1.4 The following precautionary caveat pertains only to the test method portion, Section 8, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Technical specification7 pagesEnglish languagesale 15% off
ABSTRACT
This specification covers critical characteristics of low velocity resilient material projectiles made from a resilient material. Material diameter, shape, projectile hardness, and weight shall conform to the dimensions indicated in this specification. This specification establishes minimum warning information, instructions, and package labeling for safety.
SCOPE
1.1 This specification covers critical characteristics of low velocity resilient material projectiles (herein referred to as LVRM projectiles) made of a resilient material, and shall have a diameter no smaller than 20 mm (0.7874 in.) and no greater than 30 mm (1.18 in.), with a hardness no greater than 75 Shore 00 in accordance with Specification D2240. This specification helps define whether a projectile is suitable for use with a low velocity projectile marker (herein referred to as LVP marker as defined in Specification F2574). The weight of the LVRM projectile is not to exceed 4.0 g. Furthermore, this specification establishes minimum warning and package labeling to help ensure that the LVRM projectiles are used in a safe manner and that the risk of injury is reduced.
1.2 A LVRM projectile is not a paintball as defined in Section 2.1.2 of Specification F1979.
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Technical specification3 pagesEnglish languagesale 15% off
SIGNIFICANCE AND USE
4.1 This practice is intended to provide consistent criteria, references and operational considerations in the specifications, management and construction of institutional trampoline courts.
4.2 This practice is intended to be taken into consideration by architects, designers, engineers, construction contractors, manufacturers, appropriate inspectors, owners and operators who are involved with the design, construction, manufacture, installation, operation, maintenance, inspection or major modification of institutional trampoline courts.
4.3 This practice does not apply to consumer trampolines, trampolines intended for use on water, trampolines intended for use as aquatic play equipment, trampolines primarily used for professional exhibition, or single user trampolines primarily used under the direct supervision of a trainer or coach.
4.4 This standard does not apply to stand alone institutional trampoline units that consist of one or more individual stations with a total bed area less than 37 000 in.2 (238 709.2 cm2) and employ a mechanical harnessed system to control or direct the descent of a patron.
4.5 This standard does not apply to stand alone institutional trampoline units that consist of one or more individual stations with a total bed area less than 37 000 in.2 (238 709.2 cm2) and employ individual chambers divided with small mesh netting to control or direct the descent of a patron.
4.6 This standard does not apply to inflatable amusement devices covered by Practice F2374.
4.6.1 This standard applies to trampoline courts that mount or dismount onto an inflatable impact attenuation system.
4.7 Trampoline courts that employ a device designed to introduce additional energy into the suspension or bed system are outside the scope of this standard practice.
4.8 For the purpose of this standard, consideration shall be given within the design and for operation of a trampoline court with activities including but not limited to: bouncing, jum...
SCOPE
1.1 The purpose of this practice is to delineate requirements regarding the design, manufacture, installation, operation, maintenance, inspection and major modification of commercial or institutional trampoline courts with the primary purpose of amusement, entertainment or recreation.
1.2 This standard applies to institutional trampoline courts that are located in and around amusement, entertainment or recreational facilities. Such facilities include but are not limited to trampoline parks, amusement parks, theme parks, water parks, family entertainment centers, fitness centers, gyms, gymnastics facilities, sports facilities, skate parks, camps, shopping centers, temporary special events, carnivals and municipal parks.
1.3 This standard applies to devices manufactured on or after the date of publication of this standard practice.
1.4 This practice establishes guidelines that will provide a level of conformity for the purpose of reducing potential hazards to patrons, court attendants, and spectators.
1.5 This standard does not purport to address all of the hazards associated with institutional trampoline courts. The standard’s existence alone will not prevent injuries. Like other physical activities, institutional trampoline court use involves the risk of injury, particularly if the equipment is used improperly or if users exceed their capabilities, endurance, training, or experience.
1.6 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.
1.7 This practice includes an annex (mandatory), which provides additional information (for example, rationale, background, interpretations, drawings, commentary, and so forth) to improve the user’s understanding and application of the criteria presented in this practice. The annex information shall be inter...
- Standard33 pagesEnglish languagesale 15% off
- Standard33 pagesEnglish languagesale 15% off
SIGNIFICANCE AND USE
2.1 This standard is provided to develop and maintain uniformity of terminology for the discussion and evaluation of Hunting Saddles, particularly with regard to quality assurance and safety factors.
2.2 The use of the terminology described will not alter the validity of data determined with specific test methods but provides guidance in the interpretation of test results (valid or invalid) and guidance in the selection of reasonable test procedures for those instances where no standard exists today.
SCOPE
1.1 This terminology covers terms related to hunting saddles.
1.2 This terminology is appropriate for use by hunting saddle development professionals, owners and institutions, testing firms, users and other practitioners in matters concerning hunting saddle test methods, practices and specifications which fall under jurisdiction of ASTM Committee F08 on Sports Equipment and Facilities.
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Standard2 pagesEnglish languagesale 15% off
ABSTRACT
This specification establishes testing procedures and critical characteristics of 0.68 caliber paintballs which help define whether a paintball is suitable for use in the sport of paintball. Furthermore, the specification establishes minimum warning and package labeling to help ensure that the paintballs are used in a safe manner and that the risk of injury is reduced. Tests shall be performed to conform with the requirements specified in accordance with the following test methods: paintball compatibility with polycarbonate and paintball impact breakage test.
SCOPE
1.1 This specification establishes testing procedures and critical characteristics for projectiles, which define whether they are suitable for use in the sport of paintball. Furthermore, the specification establishes minimum warning and package labeling requirements to help ensure that the paintballs are used in a safe manner and that the risk of injury is reduced.
1.2 This specification does not cover non-recreational paintballs, for example, those used by law enforcement, scientific, military, or theatrical entities.
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Technical specification5 pagesEnglish languagesale 15% off
SCOPE
1.1 This practice applies to the classification, design, manufacture, construction, operation, maintenance, and inspection of stationary waves.
1.2 Stationary wave systems shall be defined as a system that delivers a constantly flowing sheet of water nominally up to 24 in. thick travelling over a form allowing for patron interaction with a perpetual wave.
1.3 Significance and Use:
1.3.1 For the purposes of this practice, a wave system could include:
1.3.1.1 The ride surface,
1.3.1.2 The ride feature pump(s),
1.3.1.3 The water filtration and disinfection system,
1.3.1.4 The runout areas,
1.3.1.5 The structural supports,
1.3.1.6 Vehicles or other aquatic accessories that are part of the water ride as defined by the designer/engineer, and
1.3.1.7 Control systems.
1.3.2 This practice shall not apply to:
1.3.2.1 Amusement rides and devices whose design criterion is specifically addressed in other ASTM standards;
1.3.2.2 Preexisting designs manufactured before the effective date of publication of this practice if the design is service proven as defined in Practice F2291; and
1.3.2.3 Deep water wave pools, Action Rivers, lazy rivers or waterslides.
1.3.3 The terms stationary wave systems, standing wave systems, sheet wave systems, and wave systems shall be considered equivalent when used in this practice.
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Standard5 pagesEnglish languagesale 15% off
- Standard5 pagesEnglish languagesale 15% off
ABSTRACT
This specification covers the male and female threaded connectors used to interface a propellant source to a paintball marker. The male connector shall incorporate a means for propellant shutoff that shall meet the maximum leakage requirement. When the male and female connectors are joined and pressurized, together they shall meet the maximum leakage specification. The male and female connector shall conform to the physical envelope described. The male connector may contain, as a means of propellant shutoff, a valve core to provide for an automatic shutoff of flow at the time of disconnection. The female connector shall have a provision for the self venting of residual gas pressure prior to the disconnection of the threaded interface.
SCOPE
1.1 This specification covers the male and female threaded connectors used to interface a propellant source with a normal working output pressure of 10 342 kPa (1800 psig) or less to a paintball marker.
1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Technical specification3 pagesEnglish languagesale 15% off
This document specifies terms and definitions, product structure, requirements, test method and marking of Wushu Taiji (Tai Chi) sword. This document is applicable to the sword used for the Wushu (Chinese martial arts also known as Kung Fu) Taiji (Tai Chi) sport.
- Standard9 pagesEnglish languagesale 15% off
- Standard9 pagesFrench languagesale 15% off
Specifies requirements and test methods for five- or six-point safety harnesses for use by drivers in automobile competitions, in order to reduce the risk of bodily harm in an accident. Applies to safety harnesses to equip single-seater and two-seater racing cars designed and manufactured to run on closed circuits.
- Standard22 pagesEnglish languagesale 15% off
- Standard22 pagesFrench languagesale 15% off
- Standard22 pagesFrench languagesale 15% off
This European standard deals with the safety of electric commercial amusement machines and personal service machines, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances, including direct current (DC) supplied appliances and battery-operated appliances
- Draft29 pagesEnglish languagee-Library read for1 day