29.035.10 - Paper and board insulating materials

IEC TR 63043:2020(E), which is a technical report, describes common practices and state of the art for renewable energy power forecasting technology, including general data demands, renewable energy power forecasting methods and forecasting error evaluation. For the purposes of this document, renewable energy refers to variable renewable energy, which mainly comprises wind power and photovoltaic (PV) power – these are the focus of the document. Other variable renewable energies, like concentrati...view more

This part of IEC 60667 gives methods of test for vulcanized fibre sheets for electrical purposes.
Material made by combining with an adhesive several thicknesses of vulcanized fibre is not
covered by this document.
Materials which conform to this specification meet established levels of performance. However,
the selection of a material by a user for a specific application is based on the actual
requirements necessary for adequate performance in that application and not based on this
specif...view more

This part of IEC 60667 gives the definitions and general requirements for vulcanized fibre
sheets for electrical purposes. Materials made by combining with an adhesive several
thicknesses of vulcanized fibre are not covered by this document.
Materials that conform to this specification meet established levels of performance. However,
the selection of a material by a user for a specific application is based on the actual
requirements necessary for adequate performance in that application and...view more

This part of IEC 60667 gives requirements for vulcanized fibre sheets for electrical purposes.
Materials made by combining with an adhesive several thicknesses of vulcanized fibre are not
covered by this document.
Materials that conform to this specification meet established levels of performance. However,
the selection of a material by a user for a specific application is based on the actual
requirements necessary for adequate performance in that application and not based on this
specific...view more

IEC 60667-2:2020 gives methods of test for vulcanized fibre sheets for electrical purposes. Material made by combining with an adhesive several thicknesses of vulcanized fibre is not covered by this document. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application is based on the actual requirements necessary for adequate performance in that application and not based on this specification alon...view more

IEC 60667-1:2020 gives the definitions and general requirements for vulcanized fibre sheets for electrical purposes. Materials made by combining with an adhesive several thicknesses of vulcanized fibre are not covered by this document. Materials that conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application is based on the actual requirements necessary for adequate performance in that application and not based ...view more

IEC 60667-3-1: 2020 gives requirements for vulcanized fibre sheets for electrical purposes. Materials made by combining with an adhesive several thicknesses of vulcanized fibre are not covered by this document. Materials that conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application is based on the actual requirements necessary for adequate performance in that application and not based on this specification alo...view more

EN IEC 60819-3-4 specifies requirements for two types of aramid fibre paper containing mica particles and designated as PAaM. - type 1: calendered aramid paper containing mica particles; - type 2: uncalendered aramid paper containing mica particles. Materials which conform to this specification meet established levels of performance. However, the selection of material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that applic...view more

IEC 60819-3-4:2013 specifies requirements for two types of aramid fibre paper containing mica particles and designated as PAaM: - type 1: calendered aramid paper containing mica particles; - type 2: uncalendered aramid paper containing mica particles. Materials which conform to this specification meet established levels of performance. However, the selection of material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that appl...view more

IEC 60819-3-4:2013 specifies requirements for two types of aramid fibre paper containing mica particles and designated as PAaM:
- type 1: calendered aramid paper containing mica particles;
- type 2: uncalendered aramid paper containing mica particles. Materials which conform to this specification meet established levels of performance. However, the selection of material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that ap...view more

This part of IEC 60819 gives the definitions and general requirements for non-cellulosic papers for electrical purposes. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. SAFETY WARNING It is the responsibility of the user of the methods contained o...view more

This specification covers material having a nominal thickness from 0,05 mm to 0,15 mm, supplied either in the form of sheets or rolls.[
]The contents of the corrigendum of August 1995 have been included in this copy.

IEC 60512-16-21:2012 The object of this standard is to define a standard test method to assess the possibility of whisker growth by external mechanical stress on the tin and tin-alloy plated parts of a connector in its application (after wire termination, after soldering, after mounting, mated with counterpart). This standard does not cover internal stress type whisker. This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of IEC techn...view more

IEC 60819-1:2009 gives the definitions and general requirements for non-cellulosic papers for electrical purposes. The main changes from the previous edition are as follows: the list of materials to be used in combination was updated with the addition of new materials made available by progress in technology and described in Subclauses 2.7 and 2.8.

This sheet of IEC 60819-3 specifies requirements for four types of unfilled aramid papers: Type 1: calendered paper; Type 2: calendered paper, with improved tearing resistance and conformability; Type 3: uncalendered paper; Type 4: calendered paper, with lower density for laminating. Materials which conform to this specification meet established levels of performance. However, the selection of material by a user for a specific application should be based on the actual requirements necessary for ...view more

IEC 60819-3-3:2011 is a sheet of IEC 60819-3 specifies requirements for four types of unfilled aramid papers: - Type 1: calendered paper; - Type 2: calendered paper, with improved tearing resistance and conformability; - Type 3: uncalendered paper; - Type 4: calendered paper, with lower density for laminating. This edition includes the following significant technical changes with respect to the previous edition: - normative references change: all the requirements are now determined according the...view more

IEC 60819-3-3:2011 is a sheet of IEC 60819-3 specifies requirements for four types of unfilled aramid papers:
- Type 1: calendered paper;
- Type 2: calendered paper, with improved tearing resistance and conformability;
- Type 3: uncalendered paper;
- Type 4: calendered paper, with lower density for laminating.
This edition includes the following significant technical changes with respect to the previous edition:
- normative references change: all the requirements are now determined accordi...view more

IEC 62271-204:2011 applies to rigid HV gas insulated transmission lines (GIL) in which the insulation is obtained, at least partly, by a non-corrosive insulating gas, other than air at atmospheric pressure, for alternating current of rated voltages above 52 kV, and for service frequencies up to and including 60 Hz. This standard cancels and replaces IEC/TS 61640:1998. It is a technical revision. This edition includes the following significant technical changes with respect to the previous editio...view more

This sheet of IEC 60763-3 gives the requirements for laminated precompressed boards comprised of 100 % sulphate wood pulp. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

This part of IEC 60763 contains the definitions required for the understanding of all three parts of IEC 60763, the classification of material into types, and the general requirements applicable to all material covered by the standard. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and no...view more