ISO/TC 36/WG 2 - Laboratory and distribution services technology

This document specifies the makeup or assembly of time-based leaders and cue marks for 70 mm, 35 mm, and 16 mm motion-picture release prints. NOTE Extraneous materials are dealt with in Annex A.

ISO 2939:2015 specifies the positions, dimensions, and location of image and photographic sound records on 35 mm motion-picture release prints, which have been assigned for optical projection based on ISO 2907 or transmitted by television based on ISO 1223. It also specifies the relative displacement of sound with respect to the corresponding picture image frame and, through normative reference to ISO 17266, the placements of the multichannel analogue and digital photographic sound and control records.

ISO 5758:2002 specifies the information to be included on the label and/or accompanying documents, for identifying the contents of containers for processed motion-picture film and magnetic sound records. It specifies the minimum information necessary for the exchange of materials. NOTE It does not apply to the labelling of containers of unexposed motion-picture films and magnetic materials specified in ISO 3042.

ISO 8567:2002 specifies the position and dimensions of the maximum area permitted for subtitles on 35 mm and 16 mm motion-picture release prints for normal projection as specified in ISO 359 and ISO 2907. ISO 8567:2002 does not replace ISO 1223, which specifies the safe areas for prints intended for transmission by television.

This International Standard specifies graphical symbols intended for use on motion-picture equipment.

Specifies safety aspects for handling and storage of radiation-sensitive motion-picture films which do not comply with the requirements of ISO 543. Applies to all nitrate-base films which are or have been used in motion-picture photographic systems.

Also specifies the width scanned by the control data reproducer, and the reproducer spectral sensitivity. In the case of release prints, it is restricted to those containing variable area sound records in accordance with ISO 2939 and ISO 7343.

The dimensions which define the image area are established from the row of perforations discarded after slitting. This row contains a wider perforation and is customarily used for lateral resgistration of the image. Annex A describes the use of a registration device for prints made with a step printer.

This International Standard describes a method for identifying the relationship of the image geometry to the emulsion surface of 16 mm motion-picture prints.

1 .1 This International Standard specifies a method of designating underexposed motion-picture negative and reversal type film requiring forced or push-processing development. 1.2 This International Standard does not specify the procedure used in achieving a forced development result. NOTE - An International Standard dealing with overexposed motionpicture film is being prepared.

The specifications apply to image and photographic sound records on release prints. Also specified are the width and lateral position of the soubnd record scanning beam and its diplacement relative to the corresponding image frame. The sound record shall be properly reproduced at 24 perforations per second which corresponds to a film projection speed of 24 frames per second.

ISO 4241:2013 specifies the make-up or assembly of time-based leaders and cue marks for 70 mm, 35 mm and 16 mm motion-picture release prints.

ISO 2939 :2002 specifies the position and dimensions of picture image areas on 35 mm motion-picture release prints, which have been assigned for optical projection based on ISO 2907 or transmitted by television based on ISO 1223.

Specifies the essential features of leaders, change-over cue marks and run-out trailers for 35 mm and 16 mm release prints for cinema use. Also specified is the information to be placed on the leader and run-out trailer as well as the specific frame spacing of this information in relation to the beginning and end of the picture section.

Specified is the information to be included on the label and/or accompanying documents for identifying the contents of containers for processed motion-picture films and magnetic sound records. The specifications do not apply to containers for unexposed motion-picture films nor magnetic materials specified in ISO 3042. Abbreviations that may be used for designation are also given.