CLC/SR 65A - System aspects

Will be superseded by EN 61326 series

Intended to be used only after a thorough understanding of EN 61508-1, which provides the overall framework for the achievement of functional safety.

Provides information on the underlying concepts of risk and the relationship of risk to safety integrity (see annex A); a number of methods that will enable the safety integrity levels for the E/E/PE safety-related systems, other technology safety-related systems and external risk reduction facilities to be determined (see annexes, B, C, D and E) Intended for use by technical committees in the preparation of standards in accordance with the principles contained in IEC Guide 104 and ISO/IEC Guide 51. EN 61508 is also intended as a stand-alone standard.

Provides information on the underlying concepts of risk and the relationship of risk to safety integrity (see annex A); a number of methods that will enable the safety integrity levels for the E/E/PE safety-related systems, other technology safety-related systems and external risk reduction facilities to be determined (see annexes, B, C, D and E) Intended for use by technical committees in the preparation of standards in accordance with the principles contained in IEC Guide 104 and ISO/IEC Guide 51. EN 61508 is also intended as a stand-alone standard.

Contains the definitions and explanation of terms that are used in parts 1 to 7 of this standard. Intended for use by technical committees in the preparation of standards in accordance with the principles contained in IEC Guide 104 and ISO/IEC Guide 51. EN 61508 is also intended as a stand-alone standard. Has the status of a basic safety publication in accordance with IEC Guide 104.

Sets out a generic approach for all safety lifecycle activities for systems comprised of electrical and/or electronic and/or programmable electronic components (electrical / electronic / programmable electronic systems (E/E/PESs)) that are used to perform safety functions. This unified approach has been adopted in order that a rational and consistent technical policy be developed for all electrically-based safety-related systems. Is intended to facilitate the development of application sector standards. Has the status of a basic safety publication in accordance with IEC Guide 104.

Contains information and guidelines on EN 61508-2 and EN 61508-3.

Applies to any software forming part of a safety-related system or used to develop a safety-related system within the scope of IEC 61508-1 and IEC 61508-2. Provides requirements: - for safety lifecycle phases and actvities; - for informatin relating to the software safety validation; - for the preparation of information and procedures concerning software; - to be met by the organisation carrying out modifications to safety-related software; - for supporting tools. Has the status of a basic safety publication in accordance with IEC Guide 104.

EN following parallel vote * Will be superseded by EN 61326 series

Will be superseded by EN 61326 series

This standard specifies miminum requirements for immunity and emissions regarding electromagnetic compatibility (EMC) for electrical equipment, operating from a supply of less than 1000 V a.c. or 1500 V d.c. intended for professional, industrial process and educational use, including equipment and computing devices for: measurement and test: control: laboratory use; accessories intended for use with the above (such as sample handling equipment), intended to be used in industrial and non-industrial locations. Computing devices and assemblies and similar equipment within the scope of information technology equipment (ITE) and complying with applicable ITE EMC standards can be used without additional testing. Where a relevant dedicated EMC standard exists, it shall take precedence over all aspects of this product-family standard. The following equipment is covered in this standard: a) electrical measurement and test equipment - - this is equipment which by electrical means This equipment which controls on e or more output quantities to specifi calues, with each value determined by manual settings, by local or remote programming, or by one or more input variables. This includes industrial process measurement and control (IPMC) equipment, which consists of devices such as: process controllers and regulators; programmable controllers (PC); power supply units of equipment and systems (centralized or dedicated); analogue/digital indicators and recorders; process instrumentation; transducers, positioners, intelligent actuators, etc. c) Electrical laboratory equipment - This equipment which measures, indicates, monitors or analyzes substances, or is used to prepare materials. This equipment may also be used in areas other than laboratories.

D99/052: Publication withdrawn * Subject covered by EN 61000-4-1:1994