CEN/TC 207/WG 3 - Thermal insulation of building equipment and industrial installations - Procedure for the determination of reference thermal conductivity of products - Revision

This document specifies the dimensions of four types of office work chairs as well as test methods for their determination.
It does not apply to seating for children for which a European Standard exists.
Annex A (informative) contains a rationale for office chair dimensions.
Annex B (informative) contains an example to clarify the use of Table 2.
Annex C (informative) contains proposals for dimensions for headrests.
Annex D (informative) contains the measurement uncertainty.

This document specifies safety, strength and durability requirements for office work chairs.
It does not apply to other seating in the office area for which other European Standards exist.
The requirements are based upon use for 8 h a day by persons weighing up to 110 kg.
Annex A (informative) contains loads, masses and cycles for functional tests.

This European Standard specifies requirements for the safety, strength and durability of all types of non-domestic seating intended to be used by adults with a weight of not more than 110 kg, including office visitor chairs.
This European Standard does not apply to ranked seating, office work chairs, chairs for educational institutions, outdoor seating and to links for linked seating for which European Standards or drafts exist. It does also not apply to work chairs for industrial use.
This European Standard does not include requirements for the durability of upholstery materials, castors, reclining and tilting mechanisms and seat height adjustment mechanisms.
This European Standard does not include requirements for the resistance to ageing, degradation and flammability.
Annex A contains additional tests.
Annex B contains information on the level of test severity in relation to applications.
Annex C contains dimensional requirements for office visitor chairs.

TC - editorial modifications to 4.3.1, 4.3.2 and 4.3.3 of mother standard.

This European Standard specifies dimensions of work tables and desks for office tasks to be undertaken in a seated, a sit stand or standing position.
It includes neither dimensions for storage unit nor those for other tables in the office area or reception desks.

This CEN Report defines terms relating to office furniture.

This Technical Report gives recommendations for dimensions for office storage furniture.
The dimensions given in this Technical Report are based on the dimensions of the various products (i.e. ways of
data storing) to be stored in the furniture. Annex A gives some examples of storage furniture.
This Technical Report does not apply to high density mechanised filing systems, rotary filing systems, or drawing
office storage furniture.

This part of EN 1023 specifies the mechanical safety requirements of office screens which are divided into general safety requirements and structural safety requirements.

This part of EN 1023 specifies the test methods for stability and for the structure of office screens.

This part of this European standard specifies the principal dimensions for office screens.

This document specifies requirements for the safety, strength and durability of all types of non-domestic seating intended to be used by adults with a weight of not more than 110 kg, including office visitor chairs.
This document does not apply to ranked seating, office work chairs, chairs for educational institutions, outdoor seating and to links for linked seating for which other European Standards exist. It does also not apply to work chairs for industrial use.
This document does not include requirements for the durability of upholstery materials, castors, reclining and tilting mechanisms and seat height adjustment mechanisms.
This document does not include requirements for the resistance to ageing, degradation and flammability.
This document does not include requirements for electrical safety.
Annex A (Informative) contains additional tests.
Annex B (Informative) contains information on the level of test severity in relation to applications.
Annex C (Informative) contains recommended dimensions for non-domestic chairs.
Annex D (Normative) contains a seat side-to-side durability test in D-G points.
Annex E (Informative) contains a rationale for single column seating.
Annex F (Normative) contains test methods for finger entrapment and shear and compression.
Annex G (Normative) contains a test method for durability "Leg rest".

This part of prEN 1335:2017 applies to office work chairs. It specifies dimensions of three types of chairs as well as test methods for their determination.
Annex A (informative) contains a Rationale for office chair features and comparison between current published dimensions with European anthropometric data.

This European Standard specifies safety, strength and durability requirements on work tables.
It does not apply to other tables in the office area for which EN standard exists (EN 15372).
Annex A (informative) contains a test for deflection of tables tops.

This document specifies test methods for the determination of strength and durability of moving parts of desks, tables and storage furniture.  
This document does not apply to high density mechanized filing systems, rotary filing systems or plan files.
The tests are intended to simulate normal functional use, as well as misuse that might reasonably be expected to occur.
Safety requirements can be found in EN 14073-2,. Office furniture - Storage furniture - Part 2: Safety requirements
Assessment of ageing is not included.

This document specifies test methods for the determination of strength of the structure of free standing or screen and wall hanging office storage furniture as well as stability of free standing units.
This document is applicable to mobile furniture, with the exception of the test described in 5.2 which is replaced by the test described in 6.7 of prEN 14074:2004.
This document does not apply to high density mechanized filing systems, rotary filing systems, or plan files.
The tests are intended to simulate overbalancing forces and structural loads, which may occur during normal functional use, as well as misuse that might reasonably be expected to occur.
Safety depending on the structure of the building is not included, e.g. the strength of wall hanging cabinets includes only the cabinet and its parts. The wall and the wall attachment are not included.
Safety requirements can be found in prEN 14073-2.
Assessment of ageing is not included.

This document specifies safety requirements for office storage furniture.
This document does not apply to high density mechanized filing systems, rotary filing systems or plan files.
It should be understood that fulfilling the specified requirements does not ensure that failure will not occur as a result of habitual misuse or after an excessively long period of service.
Safety depending on structure of the building is not included e.g.: the strength of wall hanging cabinets includes only the cabinet and its parts. The wall and wall attachment are not included.
Assessment of ageing is not included.

This part of prEN 1335:2017 applies to office work chairs. It specifies dimensions of three types of chairs as well as test methods for their determination.
Annex A (informative) contains a Rationale for office chair features and comparison between current published dimensions with European anthropometric data.

This Technical Report specifies the definitions of a number of terms given in EN 1335-1:2000, which have been identified by CEN/TC 207/SC 3/WG 1 as being interpreted in different ways by test laboratories and manufacturers.

TC - A deviation B.2

This part of the prEN 1335:1999 applies to office work chairs. It specifies dimensions of three types of chairs as well as test methods for their determination.

This European Standard specifies safety, strength and durability requirements on work tables.
It does not apply to other tables in the office area for which EN standard exists (EN 15372).
Annex A (informative) contains a test for deflection of tables tops.

TC - Replacement of Figure 1 with a new Figure 1 (a measure has been missed)

This European Standard specifies mechanical test methods for determining the stability, strength and durability of office work chairs.
This European Standard does not specify type approval tests for chair components.
The tests are designed to be applied to an article of furniture that is fully assembled and ready for use.
The tests consist of the application, to various parts of the item, of forces simulating normal functional use, as well as misuse that might reasonably be expected to occur.
The tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.
The test results are only valid for the article tested. When the test results are intended to be applied to other similar articles, it is important that the test specimen be representative of the production model.
Tests carried out according to this standard are intended to demonstrate the ability of the item to give satisfactory service in its intended environment. The safety requirements are specified in EN 1335-2 and additional loads, masses and cycles for functional tests can be found in Annex C (informative).
The tests have been developed for units/components that have not been in use. However, when properly justified, they may be used for fault investigation.
Assessment of ageing and degradation is not included. The tests are not intended to assess the durability of upholstery, i.e. filling materials and covers.
Data are given for the design of seat-loading pads in Annex A (normative) and for the design of stability-loading pad in Annex B (normative).

This part of EN 1335 specifies the mechanical safety requirements for office work chairs.
The requirements are based upon use for 8 h a day by persons weighing up to 110 kg. For more severe conditions of use, increased requirements will be necessary.
Annex A (normative) includes loads, masses and cycles for safety tests.
Additional loads, masses and cycles for functional tests can be found in EN 1335-3:2009, Annex C.

This part of the European standard EN 527 specifies the mechanical strength requirements and test methods of the structure of tables and desks. The tests are designed to be applied to an article of furniture that is fully assembled and ready for use.

This European Standard specifies the mechanical requirements for safety of office tables and desks.