iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 527-2:2016

(Main)

Office furniture - Work tables - Part 2: Safety, strength and durability requirements

Office furniture - Work tables - Part 2: Safety, strength and durability requirements

This European Standard specifies safety, strength and durability requirements on work tables.
It does not apply to other tables in the office area for which EN standard exists (EN 15372).
Annex A (informative) contains a test for deflection of tables tops.

Büromöbel - Büro-Arbeitstische - Teil 2: Anforderungen an die Sicherheit, Festigkeit und Dauerhaltbarkeit

Diese Europäische Norm legt Anforderungen an die Sicherheit, Festigkeit und Dauerhaltbarkeit von Arbeitstischen fest.
Sie gilt nicht für andere Tische im Bürobereich, für die eine EN-Norm besteht (EN 15372).
Anhang A (informativ) enthält eine Prüfung der Durchbiegung von Tischplatten.

Mobilier de bureau - Tables de travail de bureau - Partie 2 : Exigences de sécurité, de résistance et de durabilité

La présente Norme européenne spécifie les exigences de sécurité, de résistance et de durabilité pour les tables de travail de bureau.
Elle ne s’applique pas aux autres tables du mobilier de bureau pour lesquelles d’autres normes européennes existent.

Pisarniško pohištvo - Delovne mize - 2. del: Zahteve za varnost, trdnost in trajnost

Ta evropski standard določa zahteve za varnost, trdnost in trajnost delovnih miz. Ne vključuje drugih miz v pisarnah, za katere so na voljo standardi ali osnutki EN.

General Information

Status
Withdrawn
Publication Date
06-Dec-2016
Withdrawal Date
30-Apr-2019
ICS
97.140 - Furniture
Technical Committee
CEN/TC 207 - Furniture
Drafting Committee
CEN/TC 207/WG 3 - Thermal insulation of building equipment and industrial installations - Procedure for the determination of reference thermal conductivity of products - Revision
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
01-May-2019
Ref Project
SIST EN 527-2:2017 - Office furniture - Work tables - Part 2: Safety, strength and durability requirements

Relations

Replaces
EN 527-2:2002 - Office furniture - Work tables and desks - Part 2: Mechanical safety requirements
Effective Date
22-Dec-2008
Merged Into
EN 527-2:2016+A1:2019 - Office furniture - Work tables - Part 2: Safety, strength and durability requirements
Effective Date
19-Jan-2023
Amended By
EN 527-2:2016/FprA1 - Office furniture - Work tables - Part 2: Safety, strength and durability requirements
Effective Date
27-Dec-2017

Buy Standard

EN 527-2:2017EN 527-2:2017
PreviousNext
Standard
EN 527-2:2017
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Pisarniško pohištvo - Delovne mize - 2. del: Zahteve za varnost, trdnost in trajnostBüromöbel - Büro-Arbeitstische - Teil 2: Anforderungen an die Sicherheit, Festigkeit und DauerhaltbarkeitMobilier de bureau - Tables de travail de bureau - Partie 2 : Exigences de sécurité, de résistance et de durabilitéOffice furniture - Work tables - Part 2: Safety, strength and durability requirements97.140PohištvoFurnitureICS:Ta slovenski standard je istoveten z:EN 527-2:2016SIST EN 527-2:2017en,fr,de01-marec-2017SIST EN 527-2:2017SLOVENSKI
STANDARDSIST EN 527-2:20031DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 527-2
December
t r s x ICS
{ yä s v r Supersedes EN
w t yæ tã t r r tEnglish Version
Office furniture æ Work tables æ Part
tã Safetyá strength and durability requirements Mobilier de bureau æ Tables de travail de bureau æ Partie
t ã Exigences de sécuritéá de résistance et de durabilité
Büromöbel æ BüroæArbeitstische æ Teil
tã Anforderungen an die Sicherheitá Festigkeit und Dauerhaltbarkeit This European Standard was approved by CEN on
s x October
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
w t yæ tã t r s x ESIST EN 527-2:2017

Test for the deflection of table tops . 9 Annex B (informative)
Stiffness of the structure – example . 10 Figure B.1 — Stiffness of the structure . 10
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 15338:2024(Main)
Hardware for furniture - Strength and durability of extension elements and their components
kSIST FprEN 15338:2024

This document specifies test methods and requirements for the strength and durability of all types of extension elements and their components for all fields of application, except table extensions.
The tests consist of the application of loads, forces and velocities simulating normal functional use, as well as misuse, that can reasonably be expected to occur.
With the exception of the corrosion test in 6.4, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.
The strength and durability tests only relate to the extension elements and the parts used for the attachment, e.g. screws.
The strength and durability tests are carried out in a test frame with specified properties. The test results are only used as a guide to the performance of a piece of furniture.
The test results are only valid for the extension element tested.
Ageing and influences of heat and humidity are not included.

  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15187:2024(Main)
Furniture - Assessment of the effect of light exposure
kSIST FprEN 15187:2024

This document specifies a method for the assessment of the effects of light in indoor conditions, by exposure to artificial radiation and applies to rigid surfaces of all finished products regardless of material.
It does not apply to finishes on leather and fabrics.
The test is intended to be carried out on a part of the finished furniture, but can be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test.
This document describes the most important parameters, such as the colour change when a surface is exposed and specifies the conditions to be used in the exposure apparatus.
The light resistance of a surface can be assessed by using two apparatus as specified in Clause 4, one as a reference test method, and the other for in-company testing.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15186:2024(Main)
Furniture - Assessment of the surface resistance to scratching
SIST EN 15186:2024

This document specifies a method for the assessment of the surface resistance to different kinds of visible scratches. It relates to the rigid surfaces of all finished products, regardless of their material.
It does not apply to finishes on leather and fabrics.
Method A is suitable for all types of surface coatings and coverings except for melamine faced boards (according to EN 14322) and HPL (according to EN 438 1). It simulates measurable penetrating and/or deforming scratches.
Method B is suitable for all types of surfaces. It simulates first visible traces (e.g. scratches, marks) that can also be a change in the gloss.
The test is intended to be carried out on a part of finished furniture. It can, however, be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test.
It is essential that the test be carried out on unused surfaces.

  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 747-2:2024(Main)
Furniture - Bunk beds and high beds - Part 2: Test methods
SIST EN 747-2:2024

This document specifies test methods for the safety, strength and durability of bunk beds and high beds for domestic and non-domestic use.
The tests are applicable to beds with an internal length greater than 1 400 mm and a maximum bed base width of 1 200 mm and with the upper surface of a bed base 600 mm or more above the floor.
The tests are designed to be applied to a bed that is fully assembled and ready for use.
The applicable safety requirements are given in FprEN 747-1:2023.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 747-1:2024(Main)
Furniture - Bunk beds and high beds - Part 1: Safety, strength and durability requirements
SIST EN 747-1:2024

This document specifies requirements for the safety, strength and durability of bunk beds and high beds for domestic and non-domestic use.
It is applicable to bunk beds and high beds with an internal length greater than 1 400 mm and a maximum bed base width of 1 200 mm, and with the upper surface of a bed base of 600 mm or more above the floor.
This document does not apply to bunk beds and high beds used for special purposes, including but not limited to prisons, the military and fire brigades.
If other products are included in a bunk bed/high bed, for example a table or storage furniture, the relevant European Standards could, in addition, apply.
The document contains one annex:
-   Annex A (informative) - Rationales.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17850:2023(Main)
Hardware for furniture - Star bases for seating - Requirements and test methods
SIST EN 17850:2024

This document specifies requirements and test methods for the determination of the strength, durability and stiffness of star bases for use for seating with three or more legs.
It is not applicable for star bases intended to be used in child seating products.
It is applicable without regard to materials, design/construction or manufacturing processes.
It is a component standard helping to regulate star-base properties between component manufacturer and manufacturer of final seating. This document is not relevant for the final consumer where standards for complete articles exist.
The requirements are based upon star bases fitted with glides and with castors whose wheels are up to 65 mm diameter and for use by persons weighing up to 150 kg.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15372:2023(Main)
Furniture - Strength, durability and safety - Requirements for non-domestic tables
SIST EN 15372:2024

This document specifies requirements for the safety, strength and durability of all types of non-domestic tables including those with glass in their construction.
It does not apply to office work tables or desks, tables for educational institutions, laboratory workbenches for educational institutions and outdoor tables for which EN standards exist.
It does not apply to laboratory workbenches for professional use and industrial workbenches.
It does not apply to tables where the table top is not fixed to the understructure, i.e. when applying test 6, Table 2, the top becomes detached from the understructure.
With exception of the stability tests, this document does not provide assessment of the suitability of any storage features included in non-domestic tables.
It does not include requirements for electrical safety.
It does not include requirements for the resistance to ageing, degradation.
This document has three annexes:
-   Annex A (normative) Test methods for finger entrapment;
-   Annex B (informative) Additional test requirements;
-   Annex C (informative) Test severity in relation to application.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15185:2023(Main)
Furniture - Assessment of the surface resistance to abrasion
SIST EN 15185:2024

This document specifies a method for the assessment of the abrasion resistance of surfaces with foils, laminates, melamine faced boards, pigmented and transparent lacquers.
It does not apply to leather and textile surfaces.
It does not apply to the surfaces covered by EN 14434.
The test is intended to be carried out on an unused part of the finished furniture, but can be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test.
The test is intended to be carried out on unused surfaces.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16121:2023(Main)
Non-domestic storage furniture - Requirements for safety, strength, durability and stability
SIST EN 16121:2024

This document specifies requirements for the safety, strength, and durability for all types of non-domestic storage furniture.
It does not apply to domestic storage, industrial storage, kitchen, catering equipment, retail storage, and industrial storage lockers.
Requirements for strength and durability do not apply to the structure of the building for example the strength of wall hanging cabinets includes only the cabinets and the parts used for attachment. The wall and the wall attachments are not included.
The standard contains five annexes
Annex A (normative) Test methods for finger entrapment;
Annex B (normative) Requirements for schools, kindergartens and similar applications
Annex C (normative) Selecting product from a range of furniture
Annex D (informative) Guidance of test severity in relation to application
Annex E (informative) Suggested loads for tests not specified in this standard
It does not include requirements for the resistance to ageing, degradation and flammability.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17902:2023(Main)
Furniture - Circularity - Evaluation method for dis/re-assembly capability
SIST EN 17902:2024

This document provides guidelines for one aspect of circular economy framework; disassembly and reassembly capability.
This document establishes a set of criteria on which to base an assessment of the ability to access and remove/replace/reassemble priority parts of products. The criteria provided are intended to be used when designing a product and are applicable to different designs, materials, or construction methods.
This document does not include requirements.
The document does not apply to disassembly operation for the sole purpose of separating the individual materials.
This document does not provide a method to evaluate the overall degree of circularity of furniture products. For this, additional complementary evaluation methods for other aspects are necessary.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day