CEN/TC 351/WG 2 - Emissions into indoor air

This document describes a test procedure for sampling, elution, detection, and quantification of N-nitrosamines in air samples derived from a test chamber according to EN 16516:2017+A1:2020. The following N-nitrosamines are covered:
-Nitrosodimethylamine, CAS No. 62-75-9,
- N-Nitrosomethylethylamine, CAS No. 10595-95-6,
- N-Nitrosodiethylamine, CAS No. 55-18-5,
- N-Nitrosodipropylamine, CAS No. 621-64-7,
- N-Nitrosodiisopropylamine, CAS No. 601-77-4,
- N-Nitrosodibutylamine, CAS No. 924-16-3,
- N-Nitrosopiperidine, CAS No. 100-75-4,
- N-Nitrosopyrrolidine, CAS No. 930-55-2 and
- N-Nitrosomorpholine, CAS No. 59-89-2.

To provide a concise overview of the following aspects of the application of reference rooms for the evaluation of emissions from products in indoor environments;
European dimension of the scope (regulations and schemes)
Evaluation of VOC emissions from building products: principles
Background history
Implementation in national regulations
Implementation in voluntary schemes
Broader application of the reference room (in addition to construction products)
Other possible dimensions of a reference room
Conclusion and references

This European Standard specifies a horizontal reference method for the determination of emissions of regulated dangerous substances from construction products into indoor air. This method is applicable to volatile organic compounds, semi-volatile organic compounds, and very volatile aldehydes. It is based on the use of a test chamber and subsequent analysis of the organic compounds by GC-MS or HPLC.
NOTE 1   Supplemental information is given on indirect test methods (see Annex B) and on measuring very volatile organic compounds (see Annex C).
NOTE 2   This European Standard describes the overall procedure and makes use of existing standards mainly by normative reference, complemented when necessary with additional or modified normative requirements.

This Technical Report specifies a method for the determination of ammonia from cellulose insulation products at 90% relative humidity (RH).
This document is based on the existing prEN 16516 standard which provides an horizontal reference method for the determination of emissions of regulated dangerous substances from construction products into indoor air.

This document specifies a horizontal reference method for the determination of emissions of regulated dangerous substances from construction products into indoor air. This method is applicable to volatile organic compounds, semi-volatile organic compounds, very volatile aldehydes and ammonia. It is based on the use of a test chamber and subsequent analysis of the organic compounds by GC-MS, HPLC, and for ammonia, subsequent analysis by spectrophotometric methods or any equivalent analytical methods (such as ion chromatography and ammonium specific electrode).
NOTE 1 Supplemental information is given on indirect test methods (see Annex B) and on measuring very volatile organic compounds (see Annex C).
NOTE 2 This European Standard describes the overall procedure and makes use of existing standards mainly by normative reference, complemented when necessary with additional or modified normative requirements.

This European Standard specifies a horizontal reference method for the determination of emissions of regulated dangerous substances from construction products into indoor air. This method is applicable to volatile organic compounds, semi-volatile organic compounds, and very volatile aldehydes. It is based on the use of a test chamber and subsequent analysis of the organic compounds by GC-MS or HPLC.
NOTE 1   Supplemental information is given on indirect test methods (see Annex B) and on measuring very volatile organic compounds (see Annex C).
NOTE 2   This European Standard describes the overall procedure and makes use of existing standards mainly by normative reference, complemented when necessary with additional or modified normative requirements.

This Technical Specification specifies a horizontal reference method for the determination of emissions of regulated dangerous substances from construction products into indoor air. This method is applicable to volatile organic compounds, semi-volatile organic compounds, and volatile aldehydes. It is based on the use of a test chamber and subsequent analysis of the organic compounds by GC-MS or HPLC.
NOTE 1   Supplemental information is given on indirect test methods (Annex B) and on measuring very volatile organic compounds (see informative Annex C).
NOTE 2   This Technical Specification describes the overall procedure and makes use of existing standards mainly by normative reference, complemented when necessary with additional or modified normative requirements.