Textile floor coverings - Determination of sensitivity to spilled water

This document specifies a method to determine the sensitivity of a textile floor covering for appearance change after water has been spilled and dried on the surface.
This change can be:
a)   a colour change;
b)   a change in structure;
c)   migration and concentration of chemicals coming from the product.
NOTE   A concentration of chemicals on a part of the surface can cause accelerated uneven soiling of textile floor coverings.

Textile Bodenbeläge - Bestimmung der Wasserfleckenempfindlichkeit

Dieses Dokument legt ein Verfahren zur Bestimmung der Empfindlichkeit eines textilen Bodenbelages hinsichtlich der Veränderung des Aussehens fest, nachdem Wasser auf der Oberfläche vergossen wurde und getrocknet ist.
Bei dieser Veränderung kann es sich um Folgendes handeln:
a)   eine Farbveränderung;
b)   eine Veränderung in der Struktur;
c)   eine Migration und Konzentration von Chemikalien aus dem Produkt.
ANMERKUNG   Eine Konzentration von Chemikalien auf einem Teil der Oberfläche kann ein beschleunigtes ungleichmäßiges Anschmutzen des textilen Bodenbelags verursachen.

Revêtements de sol textiles - Détermination de la sensibilité aux taches d’eau

Le présent document spécifie une méthode permettant de déterminer la sensibilité d’un revêtement de sol textile en matière de changement d’aspect lorsque de l’eau est renversée puis séchée à sa surface.
Ce changement peut être :
a)   un changement de couleur ;
b)   un changement de structure ;
c)   une migration et une concentration de produits chimiques provenant du produit.
NOTE   Une concentration de produits chimiques sur une partie de la surface peut provoquer une salissure irrégulière accélérée des revêtements de sol textiles.

Tekstilne talne obloge - Ugotavljanje občutljivosti za razlitje vode

General Information

Status
Published
Public Enquiry End Date
29-Sep-2024
Publication Date
04-Nov-2025
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
27-Oct-2025
Due Date
01-Jan-2026
Completion Date
05-Nov-2025

Relations

Standard
SIST EN 15115:2025
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2025
Tekstilne talne obloge - Ugotavljanje občutljivosti za razlitje vode
Textile floor coverings - Determination of sensitivity to spilled water
Textile Bodenbeläge - Bestimmung der Wasserfleckenempfindlichkeit
Revêtements de sol textiles - Détermination de la sensibilité aux taches d’eau
Ta slovenski standard je istoveten z: EN 15115:2025
ICS:
97.150 Talne obloge Floor coverings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 15115
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2025
EUROPÄISCHE NORM
ICS 97.150 Supersedes EN 15115:2006
English Version
Textile floor coverings - Determination of sensitivity to
spilled water
Revêtements de sol textiles - Détermination de la Textile Bodenbeläge - Bestimmung der
sensibilité aux taches d'eau Wasserfleckenempfindlichkeit
This European Standard was approved by CEN on 1 September 2025.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15115:2025 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Apparatus . 5
6 Sampling and selection of test specimens. 5
7 Atmosphere for conditioning and testing . 5
8 Procedure . 5
9 Evaluation . 6
10 Test report . 6
Bibliography . 7

European foreword
This document (EN 15115:2025) has been prepared by Technical Committee CEN/TC 134 “Resilient,
textile, laminate and modular mechanical locked floor coverings”, the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2026, and conflicting national standards shall be
withdrawn at the latest by April 2026.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 15115:2006.
— Clause 5: Apparatus: added description of the waterproof surface and ring.
— Clause 6: Sampling and selection of test specimens: consistency in number of samples.
— Clause 7: Atmosphere for conditioning and testing: reference made to EN ISO 139:20051
((20 ± 2) °C) / (65 ± 4) % RH)).
— Clause 8: Procedure: improved with respect to the application of demineralized water.
— Clause 9: Evaluation: improved evaluation procedure including reference to current standard
(= EN ISO 9405).
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
1 Scope
Th
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.