SIST EN 2591-6324:2004
(Main)Aerospace series - Elements of electrical and optical connection - Test methods - Part 6324: Optical elements - Interfacial sealing
Aerospace series - Elements of electrical and optical connection - Test methods - Part 6324: Optical elements - Interfacial sealing
This standard specifies a method of checking the interfacial sealing of optical connection elements (including permanent connections).
It shall be used together with EN 2591-100.
Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 6324: Optische Elemente - Stirnflächendichtheit
Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 6324 : Organes optiques - Étanchéité interfaciale
La présente norme prescrit une méthode pour vérifier l'étanchéité interfaciale des éléments de connexion optique (y compris les connexions permanentes).
Elle doit être utilisée conjointement avec EN 2591-100.
Aerospace series - Elements of electrical and optical connection - Test methods - Part 6324: Optical elements - Interfacial sealing
General Information
- Status
- Published
- Publication Date
- 30-Apr-2004
- Technical Committee
- I08 - Imaginarni 08
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-May-2004
- Due Date
- 01-May-2004
- Completion Date
- 01-May-2004
Overview
EN 2591-6324:2001 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 6324: Optical elements - Interfacial sealing - specifies a laboratory method for checking the interfacial sealing of optical connection elements (including permanent connections) used in aerospace equipment. It is intended to be used together with EN 2591-100 (general test method provisions) and references other test parts for specific steps.
Key topics and requirements
- Scope: Method for assessing sealing at the mating interface of optical connectors and elements to ensure protection of the optical path.
- Specimen preparation:
- Components shall be fitted with normal accessories and terminated with optical cables/fibres in accordance with the applicable product standard.
- Where not defined in a technical specification, the specimen details to be specified include type and length of cable/fibre, maximum value of insertion loss, and number of specimens.
- Test sequence:
- Connectors/optical elements are mated prior to testing.
- Initial measurements: Per EN 2591-324 (interfacial sealing generalities) and EN 2591-601 (optical elements - insertion loss).
- Procedure: Follow the interfacial sealing procedure described in EN 2591-324.
- Final measurements and pass/fail criteria: Use EN 2591-601 for measuring insertion loss and evaluating test results.
- Apparatus and references: Test apparatus and detailed methods are referenced to EN 2591-324 and EN 2591-601 rather than fully reproduced in this part.
Applications
- Qualification and verification testing of aerospace optical connectors and assemblies to confirm interface sealing and optical performance.
- Acceptance testing for production lots where interfacial sealing and insertion loss are critical.
- Design verification for connector manufacturers to demonstrate compliance with aerospace test methods.
- Use in environmental and reliability test campaigns where optical path integrity under contamination or ingress conditions must be proven.
Who should use this standard
- Aerospace systems engineers and optical/connector designers
- Manufacturing and QA/test laboratories performing connector qualification
- Procurement, certification, and compliance teams specifying test requirements for optical interconnects in aircraft and spacecraft systems
- Connector manufacturers developing products for aerospace markets
Related standards
- EN 2591-100 - General test methods for elements of electrical and optical connection
- EN 2591-324 - Interfacial sealing (general procedures)
- EN 2591-601 - Optical elements - Insertion loss
Keywords: EN 2591-6324:2001, interfacial sealing, optical connection elements, aerospace test methods, EN 2591-100, insertion loss, optical connectors.
Frequently Asked Questions
SIST EN 2591-6324:2004 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Elements of electrical and optical connection - Test methods - Part 6324: Optical elements - Interfacial sealing". This standard covers: This standard specifies a method of checking the interfacial sealing of optical connection elements (including permanent connections). It shall be used together with EN 2591-100.
This standard specifies a method of checking the interfacial sealing of optical connection elements (including permanent connections). It shall be used together with EN 2591-100.
SIST EN 2591-6324:2004 is classified under the following ICS (International Classification for Standards) categories: 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 2591-6324:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Elements of electrical and optical connection - Test methods - Part 6324: Optical elements - Interfacial sealingLuft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 6324: Optische Elemente - StirnflächendichtheitSérie aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 6324 : Organes optiques - Étanchéité interfacialeAerospace series - Elements of electrical and optical connection - Test methods - Part 6324: Optical elements - Interfacial sealing49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2591-6324:2001SIST EN 2591-6324:2004en01-maj-2004SIST EN 2591-6324:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2591-6324December 2001ICS 49.060English versionAerospace series - Elements of electrical and optical connection- Test methods - Part 6324: Optical elements - InterfacialsealingSérie aérospatiale - Organes de connexion électrique etoptique - Méthodes d'essais - Partie 6324: Organesoptiques - Etanchéité interfacialeLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Prüfverfahren - Teil 6324: OptischeElemente - StirnflächendichtheitThis European Standard was approved by CEN on 5 August 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2591-6324:2001 ESIST EN 2591-6324:2004
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...