SIST EN ISO 8394-2:2018

SLOVENSKI STANDARD
SIST EN ISO 8394-2:2018
01-februar-2018
1DGRPHãþD
SIST EN ISO 8394-2:2011
SIST EN ISO 8394-2:2011/AC:2011
Gradnja objektov - Ugotavljanje iztisljivosti tesnil - 2. del: Uporaba standardizirane
opreme (ISO 8394-2:2017)
Buildings and civil engineering works - Determination of extrudability for sealant - Part 2:
Using standardized apparatus (ISO 8394-2:2017)
Hochbau - Fugendichtstoffe - Teil 2: Bestimmung der Verarbeitbarkeit von Dichtstoffen
mit genormtem Gerät (ISO 8394-2:2017)
Bâtiments et ouvrages de génie civil - Détermination de l'extrudabilité des mastics -
Partie 2: À l'aide d'un appareil normalisé (ISO 8394-2:2017)
Ta slovenski standard je istoveten z: EN ISO 8394-2:2017
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN ISO 8394-2:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 8394-2:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 8394-2:2018


EN ISO 8394-2
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2017
EUROPÄISCHE NORM
ICS 91.100.50 Supersedes EN ISO 8394-2:2010
English Version

Buildings and civil engineering works - Determination of
extrudability for sealant - Part 2: Using standardized
apparatus (ISO 8394-2:2017)
Bâtiments et ouvrages de génie civil - Détermination de Hochbau - Fugendichtstoffe - Teil 2: Bestimmung der
l'extrudabilité des mastics - Partie 2: À l'aide d'un Verarbeitbarkeit von Dichtstoffen mit genormtem
appareil normalisé (ISO 8394-2:2017) Gerät (ISO 8394-2:2017)
This European Standard was approved by CEN on 2 November 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8394-2:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 8394-2:2018
EN ISO 8394-2:2017 (E)
Contents Page
European foreword . 3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 8394-2:2018
EN ISO 8394-2:2017 (E)
European foreword
This document (EN ISO 8394-2:2017) has been prepared by Technical Committee ISO/TC 59 “Buildings
and civil engineering works” in collaboration with Technical Committee CEN/TC 349 “Sealants for
joints in building construction” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2018, and conflicting national standards shall be
withdrawn at the latest by May 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8394-2:2010.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 8394-2:2017 has been approved by CEN as EN ISO 8394-2:2017 without any
modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 8394-2:2018

---------------------- Page: 6 ----------------------

SIST EN ISO 8394-2:2018
INTERNATIONAL ISO
STANDARD 8394-2
Second edition
2017-09
Buildings and civil engineering
works — Determination of
extrudability for sealant —
Part 2:
Using standardized apparatus
Bâtiments et ouvrages de génie civil — Détermination de
l'extrudabilité des mastics —
Partie 2: À l'aide d'un appareil normalisé
Reference number
ISO 8394-2:2017(E)
©
ISO 2017

---------------------- Page: 7 ----------------------

SIST EN ISO 8394-2:2018
ISO 8394-2:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 8394-2:2018
ISO 8394-2:2017(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 General . 2
7 Preparation of the standardized apparatus . 2
8 Conditioning of the sealant . 2
8.1 General . 2
8.2 Single-component sealants . 2
8.3 Multi-component sealants . 2
9 Test procedure . 3
9.1 General . 3
9.2 Single-component sealants . 3
9.3 Multi-component sealants . 3
10 Expression of results . 4
10.1 Extrusion rate, expressed as mass per minute . 4
10.2 Extrusion rate, expressed as volume per minute . 4
10.3 Multi-component sealants . 4
11 Test report . 4
Bibliography . 8
© ISO 2017 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 8394-2:2018
ISO 8394-2:2017(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
...