Cold applied joint sealants - Test methods - Part 5: Determination of the resistance to hydrolysis

This draft European Standard describes a test method for determining the resistance to hydrolysis of cold applied joint sealants after treatment at elevated temperature and high humidity.

Kalt verarbeitbare Fugenmassen - Prüfverfahren - Teil 5: Bestimmung des Aushärtungsgrades

Diese Europäische Norm beschreibt ein Prüfverfahren zur Bestimmung der Beständigkeit von kalt verarbeitbaren Fugenmassen gegen Hydrolyse nach Beanspruchung bei erhöhter Temperatur und hoher Luftfeuchte.

Mastics pour joints appliqués à froid - Méthodes d'essai - Partie 5 : Détermination de la résistance à l'hydrolyse

Hladno nanosljive tesnilne mase za stike - Preskusne metode - 5. del: Ugotavljanje odpornosti proti hidrolizi

Ta osnutek evropskega standarda opisuje preskusno metodo za ugotavljanje odpornosti hladno nanosljivih tesnilnih mas za stike proti hidrolizi po obdelavi pri povišani temperaturi in visoki vlažnosti.

General Information

Status
Published
Public Enquiry End Date
19-Feb-2017
Publication Date
04-Apr-2019
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
02-Apr-2019
Due Date
07-Jun-2019
Completion Date
05-Apr-2019

Relations

Buy Standard

Standard
EN 14187-5:2019
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hladno nanosljive tesnilne mase za stike - Preskusne metode - 5. del: Ugotavljanje odpornosti proti hidroliziKalt verarbeitbare Fugenmassen - Prüfverfahren - Teil 5: Bestimmung des AushärtungsgradesMastics pour joints appliqués à froid - Méthodes d'essai - Partie 5 : Détermination de la résistance à l'hydrolyseCold applied joint sealants - Test methods - Part 5: Determination of the resistance to hydrolysis93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 14187-5:2019SIST EN 14187-5:2019en,fr,de01-maj-2019SIST EN 14187-5:2019SLOVENSKI
STANDARDSIST EN 14187-5:20041DGRPHãþD



SIST EN 14187-5:2019



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14187-5
March
t r s { ICS
{ uä r z rä t r Supersedes EN
s v s z yæ wã t r r uEnglish Version
Cold applied joint sealants æ Test methods æ Part
wã Determination of the resistance to hydrolysis Mastics pour joints appliqués à froid æ Méthodes d 5essai æ Partie
w ã Détermination de la résistance à l 5hydrolyse Kalt verarbeitbare Fugenmassen æ Prüfverfahren æ Teil
wã Bestimmung des Aushärtungsgrades This European Standard was approved by CEN on
t w July
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
9
t r s { CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s v s z yæ wã t r s { ESIST EN 14187-5:2019



EN 14187-5:2019 (E) 2 Contents Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 4 4 Principle . 4 5 Apparatus and materials . 4 6 Preparation of test specimens . 4 7 Conditioning . 5 8 Procedure. 5 8.1 Test temperature . 5 8.2 Test period . 5 8.3 Test procedure . 5 8.4 Calculation and expression of results . 5 9 Test report . 6
SIST EN 14187-5:2019



EN 14187-5:2019 (E) 3 European foreword This document (EN 14187-5:2019) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretariat of which is held by DIN. This document shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2019, and conflicting national standards shall be withdrawn at the latest by September 2019. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14187-5:2003. Apart from editorial changes no major changes have been made in this revision. This document is one of a series of standards as listed below: — EN 14187-1, Cold applied joint
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.