iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN ISO 21207:2024

(Main)

Corrosion tests in artificial atmospheres - Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying (ISO/DIS 21207:2024)

Corrosion tests in artificial atmospheres - Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying (ISO/DIS 21207:2024)

ISO 21207:2015 defines two accelerated corrosion test methods to be used in assessing the corrosion resistance of products with metals in environments where there is a significant influence of chloride ions, mainly as sodium chloride from a marine source or by winter road de-icing salt, and of corrosion-promoting gases from industrial or traffic air pollution.
ISO 21207:2015 specifies both the test apparatus and test procedures to be used in executing the accelerated corrosion tests.
The methods are especially suitable for assessing the corrosion resistance of sensitive products with metals, e.g. electronic components, used in traffic and industrial environments.

Korrosionsprüfungen in künstlichen Atmosphären - Beschleunigte Korrosionstests mit alternativer Einwirkung von korrosionsfördernden Gasen, neutraler Salzsprühung und Trocknung (ISO/DIS 21207:2024)

Essais de corrosion en atmosphères artificielles - Essais de corrosion accélérée par expositions alternées à des gaz favorisant la corrosion ou au brouillard salin neutre et à un séchage (ISO/DIS 21207:2024)

Korozijski preskusi v umetnih atmosferah - Pospešeni korozijski preskusi, ki vključujejo izmenično izpostavljenost plinom, ki spodbujajo korozijo, nevtralnemu razprševanju soli in sušenju (ISO/DIS 21207:2024)

General Information

Status
Not Published
Public Enquiry End Date
30-Jul-2024
ICS
77.060 - Corrosion of metals
Technical Committee
IPKZ - Protection of metals against corrosion
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
11-Jun-2024
Due Date
29-Oct-2024
Ref Project
prEN ISO 21207 - Corrosion tests in artificial atmospheres - Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying (ISO/DIS 21207:2024)

Relations

Revised
SIST EN ISO 21207:2022 - Corrosion tests in artificial atmospheres - Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying (ISO 21207:2015)
Effective Date
19-Jan-2023

Buy Standard

prEN ISO 21207:2024prEN ISO 21207:2024
PreviousNext
Draft
prEN ISO 21207:2024
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 21207:2024
01-julij-2024
Korozijski preskusi v umetnih atmosferah - Pospešeni korozijski preskusi, ki
vključujejo izmenično izpostavljenost plinom, ki spodbujajo korozijo, nevtralnemu
razprševanju soli in sušenju (ISO/DIS 21207:2024)
Corrosion tests in artificial atmospheres - Accelerated corrosion tests involving alternate
exposure to corrosion-promoting gases, neutral salt-spray and drying (ISO/DIS
21207:2024)
Korrosionsprüfungen in künstlichen Atmosphären - Beschleunigte Korrosionstests mit
alternativer Einwirkung von korrosionsfördernden Gasen, neutraler Salzsprühung und
Trocknung (ISO/DIS 21207:2024)
Essais de corrosion en atmosphères artificielles - Essais de corrosion accélérée par
expositions alternées à des gaz favorisant la corrosion ou au brouillard salin neutre et à
un séchage (ISO/DIS 21207:2024)
Ta slovenski standard je istoveten z: prEN ISO 21207
ICS:
77.060 Korozija kovin Corrosion of metals
oSIST prEN ISO 21207:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 21207:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 21207:2024
DRAFT
International
Standard
ISO/DIS 21207
ISO/TC 156
Corrosion tests in artificial
Secretariat: SAC
atmospheres — Accelerated
Voting begins on:
corrosion tests involving alternate
2024-06-05
exposure to corrosion-promoting
Voting terminates on:
gases, neutral salt-spray and drying
2024-08-28
Essais de corrosion en atmosphères artificielles — Essais de
corrosion accélérée par expositions alternées à des gaz oxydants
ou au brouillard salin neutre et à un séchage
ICS: 77.060
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 21207:2024(en)
© ISO 2024

---------------------- Page: 3 ----------------------
oSIST prEN ISO 21207:2024
DRAFT
ISO/DIS 21207:2024(en)
International
Standard
ISO/DIS 21207
ISO/TC 156
Corrosion tests in artificial
Secretariat: SAC
atmospheres — Accelerated
Voting begins on:
corrosion tests involving alternate
exposure to corrosion-promoting
Voting terminates on:
gases, neutral salt-spray and drying
Essais de corrosion en atmosphères artificielles — Essais de
corrosion accélérée par expositions alternées à des gaz oxydants
ou au brouillard salin neutre et à un séchage
ICS: 77.060
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 21207:2024(en)
© ISO 2024

© ISO 2024 – All rights reserved
ii

---------------------- Page: 4 ----------------------
oSIST prEN ISO 21207:2024
ISO/DIS 21207:2024(en)
Contents Page
Foreword .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 11782-2:2008/A1:2024(Amendment)
Corrosion of metals and alloys - Corrosion fatigue testing - Part 2: Crack propagation testing using precracked specimens - Amendment 1 (ISO 11782-2:1998/Amd 1:2024)
EN ISO 11782-2:2008/A1:2024
  • Amendment
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 7539-6:2018/A1:2024(Amendment)
Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement - Amendment 1 (ISO 7539-6:2018/Amd 1:2024)
EN ISO 7539-6:2018/A1:2024
  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10062:2023(Main)
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:2022)
EN ISO 10062:2022

ISO 10062:2006 specifies tests which are intended to determine the influence of one or more flowing polluting gas(es) at volume fractions less than or equal to 0,000001 on test samples and/or articles of metals and alloys with or without corrosion protection under determined conditions of temperature and relative humidity.
These tests apply to metals and their alloys, metallic coatings (anodic and cathodic), metals with conversion coatings, metals with anodic oxide coatings, and metals with organic coatings.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9227:2023(Main)
Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2022)
EN ISO 9227:2022

This document specifies the apparatus, the reagents and the procedure to be used in conducting the
neutral salt spray (NSS), acetic acid salt spray (AASS) and copper-accelerated acetic acid salt spray
(CASS) tests for assessment of the corrosion resistance of metallic materials, with or without permanent
or temporary corrosion protection.
It also describes the method employed to evaluate the corrosivity of the test cabinet environment.
It does not specify the dimensions or types of test specimens, the exposure period to be used for a
particular product, or the interpretation of results. Such details are provided in the appropriate product
specifications.
The salt spray tests are particularly useful for detecting discontinuities, such as pores and other defects,
in certain metallic, organic, anodic oxide and conversion coatings.
The NSS test is particularly applicable to:
— metals and their alloys;
— metallic coatings (anodic and cathodic);
— conversion coatings;
— anodic oxide coatings;
— organic coatings on metallic materials.
The AASS test is especially useful for testing decorative coatings of copper + nickel + chromium, or
nickel + chromium. It has also been found suitable for testing anodic and organic coatings on aluminium.
The CASS test is useful for testing decorative coatings of copper + nickel + chromium, or nickel +
chromium. It has also been found suitable for testing anodic and organic coatings on aluminium.
The salt spray methods are all suitable for checking that the quality of a metallic material, with or
without corrosion protection, is maintained. They are not intended to be used for comparative testing
as a means of ranking different materials relative to each other with respect to corrosion resistance or
as means of predicting long-term corrosion resistance of the tested material.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 22479:2022(Main)
Corrosion of metals and alloys - Sulfur dioxide test in a humid atmosphere (fixed gas method) (ISO 22479:2019)
EN ISO 22479:2022

This document specifies a method for assessing the resistance of materials or products to a humid
atmosphere containing sulfur dioxide.
This method is applicable to testing metals and alloys, metallic and non-organic coatings and organic
coatings.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16539:2022(Main)
Corrosion of metals and alloys - Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process - "Dry" and "wet" conditions at constant absolute humidity (ISO 16539:2013)
EN ISO 16539:2022

This document specifies two accelerated corrosion test procedures, Methods A and B, for the evaluation of corrosion behaviour of surface-treated metals and their alloys with and without paint on them in atmospheric environments. It also specifies the apparatus used. The two tests involve salt deposition and dry/wet conditions at a constant absolute humidity.
Method A applies to: metals and their alloys (including corrosion-resistance alloys)
Method B applies to: metals and their alloys; metals and their alloys with coatings [including metallic coatings (anodic or cathodic), organic coatings, and conversion coatings]

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21207:2022(Main)
Corrosion tests in artificial atmospheres - Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying (ISO 21207:2015)
EN ISO 21207:2022

This International Standard defines two accelerated corrosion test methods to be used in assessing the
corrosion resistance of products with metals in environments where there is a significant influence of
chloride ions, mainly as sodium chloride from a marine source or by winter road de-icing salt, and of
corrosion-promoting gases from industrial or traffic air pollution.
This International Standard specifies both the test apparatus and test procedures to be used in
executing the accelerated corrosion tests.
The methods are especially suitable for assessing the corrosion resistance of sensitive products with
metals, e.g. electronic components, used in traffic and industrial environments.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 24656:2022(Main)
Cathodic protection of offshore wind structures (ISO 24656:2022)
EN ISO 24656:2022

This European Standard will address the external and internal cathodic protection for offshore wind farm structures. It will be applicable for structures and appurtenances in contact with seawater or seabed environments.  This Standard addresses:
•   Design and implementation of cathodic protection systems for new structures,
•   Assessment of residual lifetime of existing cathodic protection systems,
•   Design and implementation of retrofit cathodic protection systems for improvement of the protection level or for life extension of the protection,
•   Inspection and performance monitoring of cathodic protection systems installed on existing structures,
•   Guidance on cathodic protection of reinforced concrete structures

  • Standard
    120 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12696:2022(Main)
Cathodic protection of steel in concrete (ISO 12696:2022)
EN ISO 12696:2022

This document specifies performance requirements for cathodic protection of steel in cement-based
concrete, in both new and existing structures. It covers building and civil engineering structures,
including carbon steel reinforcement and prestressed reinforcement embedded in the concrete. It is
applicable to uncoated steel reinforcement and to organic-coated steel reinforcement. It is not applicable
to reinforced concrete containing electrically conductive fibres (e.g. carbon or steel).
This document applies to steel embedded in atmospherically exposed, buried, immersed and tidal
elements of buildings or structures.
This document is only applicable to the applications of cathodic protection to steel in concrete which
are designed with the intention to, and can be demonstrated to, meet the criteria of protection specified
in 8.6. This requires the provision of sufficient performance monitoring systems as specified in 6.3 to
all parts of the structure intended to be protected, in order to assess the extent to which the criteria in
8.6 are met.
This document does not apply to galvanic anodes or systems applied into patch repairs to reduce the
effects of ‘incipient anodes’. This document does also not apply to any form of cathodic protection
systems or other electrochemical treatments that either cannot meet the requirements of 8.6 or are not
provided with the performance monitoring systems (see 6.3) that are necessary to assess whether the
criteria of protection specified in 8.6 are met.
NOTE 1 Annex A gives guidance on the principles of cathodic protection and its application to steel in concrete.
NOTE 2 This document, while not specifically intended to address cathodic protection of steel in any
electrolyte except concrete, can be applied to cathodic protection of steel in other cementitious materials such as
are found, for example, in early 20th century steel-framed masonry, brick and terracotta clad buildings. In such
applications, additional considerations specific to these structures are required in respect of design, materials
and installation of cathodic protection; however, the requirements of this document can be applied to these
systems

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15112:2022(Main)
External cathodic protection of well casings
EN 15112:2022

This document specifies methods used to evaluate the external corrosion hazards of well casings, as well as cathodic protection means and devices to be implemented in order to prevent corrosion of the external part of these wells in contact with the soil.
This document applies to any gas, oil or water well with metallic casing, whether cemented or not.
However, in special conditions (shallow casings: e.g. 50 m, and homogeneous soil), EN 12954 can be used to achieve the cathodic protection and assess its efficiency.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day