SIST EN 357:2005

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Glas im Bauwesen - Brandschutzverglasungen aus durchsichtigen oder durchscheinenden Glasprodukten - Klassifizierung des FeuerwiderstandesVerre dans la construction - Eléments de construction vitrés résistant au feu, incluant des produits verriers transparent ou translucides - Classification de la résistance au feuGlass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance81.040.20Steklo v gradbeništvuGlass in buildingICS:Ta slovenski standard je istoveten z:EN 357:2004SIST EN 357:2005en01-marec-2005SIST EN 357:2005SLOVENSKI
STANDARDSIST EN 357:20011DGRPHãþD



SIST EN 357:2005



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 357
November 2004 ICS 81.040.20 Supersedes EN 357:2000 English version
Glass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance
Verre dans la construction - Eléments de construction vitrés résistant au feu, incluant des produits verriers transparent ou translucides -Classification de la résistance au feu
Glas im Bauwesen - Brandschutzverglasungen aus durchsichtigen oder durchscheinenden Glasprodukten - Klassifizierung des Feuerwiderstandes This European Standard was approved by CEN on 10 September 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 357:2004: ESIST EN 357:2005



EN 357:2004 (E) 2 Contents page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.6 4 Glass products.6 5 Classification.7 5.1 General.7 5.2 Loadbearing separating fire resistant glazed elements.8 5.3 Non-loadbearing separating fire resistant glazed elements.8 6 Requirements and test methods.9 6.1 General requirements and test methods.9 6.2 Fire resistance requirements and tests.9 Annex A (informative)
Typical structures commonly available in the relevant fire resistant glazed elements.11 Bibliography.12
SIST EN 357:2005



EN 357:2004 (E) 3 Foreword This document (EN 357:2004) has been prepared by Technical Committee CEN /TC 129, "Glass in building", the secretariat of which is held by IBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2005, and conflicting national standards shall be withdrawn at the latest by May 2005. This document supersedes EN 357:2000. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard : Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
SIST EN 357:2005



EN 357:2004 (E) 4 1 Scope This document specifies a classification of transparent or translucent glass products for use in appropriate glazed elements intended specially to provide fire resistance. These glass products are described in European Standards on basic and processed glass products. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 572-2, Glass in building — Basic soda lime silicate glass products — Part 2: Float glass. EN 572-3, Glass in building — Basic soda lime silicate glass products — Part 3: Polished wired glass. EN 572-4, Glass in building — Basic soda lime silicate glass products — Part 4: Drawn sheet glass. EN 572-5, Glass in building — Basic soda lime silicate glass products — Part 5: Patterned glass. EN 572-6, Glass in building — Basic soda lime silicate glass products — Part 6: Wired patterned glass. EN 572-7, Glass in building — Basic soda lime silicate glass products — Part 7: Wired or unwired channel shaped glass. EN 1051-1, Glass in building — Glass blocks and glass pavers — Part 1: Definitions and description. EN 1096-1, Glass in building — Coated glass — Part 1: Definitions and classification. EN 1096-2, Glass in building — Coated glass — Part 2: Requirements and test methods for class A, B and S coatings. EN 1096-3, Glass in building — Coated glass — Part 3: Requirements and test methods for class C and D coatings. EN 1279-1, Glass in building — Insulating glass units — Part 1: Generalities, dimensional tolerances and rules for the system description. EN 1279-2, Glass in building — Insulating glass units — Part 2: Long term test method and requirements for moisture penetration. EN 1279-3, Glass in building — Insulating glass units — Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances. EN 1279-4, Glass in building — Insulating glass units — Part 4: Methods of test for the physical attributes of edge seals. EN 1363-1, Fire resistance tests — Part 1: General requirements. EN 1363-2, Fire resistance tests — Part 2: Alternative and additional procedures. EN 1364-1, Fire resistance tests for non-loadbearing elements — Part 1: Walls. EN 1364-2, Fire resistance tests for non-loadbearing elements — Part 2: Ceilings. prEN 1364-3, Fire resistance tests for non-loadbearing elements — Part 3: Curtain walling. EN 1365-1, Fire resistance tests for loadbearing elements — Part 1: Walls. SIST EN 357:2005



EN 357:2004 (E) 5 EN 1365-2, Fire resistance tests for loadbearing elements — Part 2: Floors and roofs. EN 1634-1, Fire resistance tests for door and shutter assemblies — Part 1: Fire doors and shutters. EN 1634-3, Fire resistance tests for door and shutter assemblies — Part 3: Smoke control doors and shutters. EN 1748-1-1, Glass in building — Special basic products — Borosilicate glasses — Part 1-1: Definition and general physical and mechanical properties. EN 1748-2-1, Glass in building - Special basic products - Glass ceramics - Part 2-1 Definitions and general physical and mechanical properties. EN 1863-1, Glass in building — Heat strengthened soda lime silicate glass – Part 1: Definition and description. EN 12150-1, Glass in building — Thermally toughened soda lime silicate safety glass Part 1: Definition and description. EN 12337-1, Glass in building — Chemically strengthened soda lime silicate glass — Part 1: Definition and description. EN 13024-1, Glass in building — Thermally toughened borosilicate safety glass — Part 1: Part 1: Definition and description. EN 13501-2, Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services. EN 14178-1, Glass in building - Basic alkaline earth silicate glass
- Part 1: Float glass. prEN 14179-1, Glass in building - Heat soaked thermally toughened soda
lime silicate safety glass - Part 1: Definition and description. prEN 14321-1, Glass in building - Thermally toughened alkaline earth silicate
safety glass - Part 1: Definition and description. EN ISO 12543-1, Glass in building — Laminated glass and laminated safety glass — Part 1: Definitions and description of component parts (ISO 12543-1:1998). EN ISO 12543-2, Glass in building — Lamin
...