SIST EN 13480-4:2018/kFprA1:2023

SLOVENSKI STANDARD
SIST EN 13480-4:2018/oprA1:2018
01-november-2018
Kovinski industrijski cevovodi - 4. del: Proizvodnja in vgradnja - Dopolnilo A1
Metallic industrial piping - Part 4: Fabrication and installation
Metallische industrielle Rohrleitungen - Teil 4: Fertigung und Verlegung
Tuyauteries industrielles métalliques - Partie 4 : Fabrication et installation
Ta slovenski standard je istoveten z: EN 13480-4:2017/prA1
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN 13480-4:2018/oprA1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13480-4:2018/oprA1:2018

---------------------- Page: 2 ----------------------

SIST EN 13480-4:2018/oprA1:2018


DRAFT
EUROPEAN STANDARD
EN 13480-4:2017
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
October 2018
ICS 23.040.01
English Version

Metallic industrial piping - Part 4: Fabrication and
installation
Tuyauteries industrielles métalliques - Partie 4 : Metallische industrielle Rohrleitungen - Teil 4:
Fabrication et installation Fertigung und Verlegung
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 267.

This draft amendment A1, if approved, will modify the European Standard EN 13480-4:2017. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13480-4:2017/prA1:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13480-4:2018/oprA1:2018
EN 13480-4:2017/prA1:2018 (E)
Contents Page
European foreword . 3
1 Modifications to Clause 2, Normative references . 4
2 Modification to 9.1, Welding personnel . 4
3 Modifications to 9.3.1, Verification of suitability . 4
4 Modifications to 9.14.1, General . 5
5 Modification to 9.14.7, Insulation . 5
6 Modification to 11.2.2, CE Marking of installed piping . 5
7 Modification to Annex ZA (informative), Relationship between this European
Standard and the Essential Requirements of EU Directive 2014/68/EU aimed to be
covered. 5
8 Modification to the final Bibliography.
...