SIST EN 300 219-2:2001
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment transmitting signals to initiate a specific response in the receiver; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
- Abstract
To incorporate the text and tables corresponding to the sought change of status of the standard to bring it into an appropriate form as a Harmonised Standard under the R&TTE Directive (1999/5/EC)
- Status
- Published
- Publication Date
- 30-Nov-2001
- Technical Committee
- RES - Radio equipment and systems
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Dec-2001
- Due Date
- 01-Dec-2001
- Completion Date
- 01-Dec-2001
- Mandate
- M/284
SIST EN 300 219-2:2001 is an ETSI Harmonized European Standard for radio equipment in the land mobile service that transmits signals to initiate a specific response in the receiver. It supports Article 3.2 of the Radio and Telecommunications Terminal Equipment (R&TTE) Directive and sets the spectrum-related requirements and test methods for this equipment. The Slovenian standard is identical to EN 300 219-2 Version 1.1.1.
What does SIST EN 300 219-2:2001 specify?
SIST EN 300 219-2:2001 applies to constant envelope angle modulation systems operating from 30 MHz to 1000 MHz with channel separations of 12.5 kHz, 20 kHz and 25 kHz. It covers non-speech transmissions, and the non-speech part of combined speech/non-speech equipment when the equipment has an antenna connector.
The standard is aimed at radio equipment that sends signalling rather than speech, including a transmitter with associated encoder and/or a receiver with associated decoder. The encoder and decoder may be separate equipment, and compliance then applies to the combination.
The document is organized into:
- Clause 1 - Scope
- Clause 2 - References
- Clause 3 - Definitions, symbols and abbreviations
- Clause 4 - Technical specifications
- Clause 5 - Testing for compliance with technical requirements
What are the key requirements of SIST EN 300 219-2:2001?
SIST EN 300 219-2:2001 sets the spectrum and receiver performance checks that show whether the equipment makes efficient use of spectrum and avoids harmful interference. In practice, it tells the lab what to test, under what conditions, and how to judge the result against the limits in EN 300 219-1.
Transmitter performance
Clause 4.2 covers transmitter frequency error, carrier power, effective radiated power, adjacent channel power, radiated spurious emissions, intermodulation attenuation, transmitter attack time, transmitter release time, and transient frequency behaviour. These checks matter because they control how accurately the transmitter stays on channel, how much useful signal it radiates, and how much unwanted energy it puts into nearby channels or outside the intended band.
Receiver performance
Clause 4.2 also covers maximum usable sensitivity, co-channel rejection, adjacent channel selectivity, spurious response rejection, intermodulation response rejection, blocking or desensitization, receiver spurious radiations, and duplex-operation performance. These items show whether the receiver can hear the wanted response signal while resisting interference from other signals.
Test conditions and result interpretation
Clause 5.1 requires measurements under normal test conditions and, where EN 300 219-1 says so, under extreme test conditions. Clause 5.2 requires the test report to include measurement uncertainty, and the measured value is compared with the relevant limit to decide compliance. The uncertainty figures are tied to ETR 028 and to the stated coverage factors.
Test suites
Clauses 5.3 and 5.4 group the radio tests into transmitter test suites and other radio test suites. This helps a test house or manufacturer run a complete compliance campaign without guessing which checks belong together.
What terms does SIST EN 300 219-2:2001 define?
- R&TTE Directive - The Radio and Telecommunications Terminal Equipment Directive that provides the legal framework for the harmonized standard.
- EMC - Electro-Magnetic Compatibility, the area concerned with electromagnetic interactions between equipment.
- LV - Low Voltage, the safety directive referenced in the document’s regulatory context.
- Environmental profile - The declared operating environment used to judge whether the equipment must meet the technical requirements.
- Maximum usable sensitivity - The lowest wanted signal level a receiver can handle while still producing a usable response.
- Adjacent channel selectivity - The receiver’s ability to accept the wanted signal while rejecting a neighbouring-channel signal.
- Spurious emissions - Unwanted emissions outside the intended signal that can disturb other radio users.
Who uses SIST EN 300 219-2:2001?
Manufacturers of land mobile radio equipment use SIST EN 300 219-2:2001 when designing signalling radios and their encoder or decoder functions. Test laboratories use it to set up transmitter and receiver measurements and to prepare compliance reports.
It is also useful to quality managers, compliance teams and buyers who need to specify or verify radio equipment for signalling applications in the land mobile service, especially where non-speech transmission and duplex behaviour matter.
Which standards are used with SIST EN 300 219-2:2001?
The main companion document is ETSI EN 300 219-1. It supplies the technical characteristics, definitions, limits and measurement methods that Part 2 refers to throughout.
ETR 028 is used for the treatment of measurement uncertainty. The references also place the standard in the framework of Directive 1999/5/EC, with Directive 98/34/EC noted in the foreword and the EMC and LV directives cited in the regulatory context.
What does the SIST EN 300 219-2:2001 document contain?
SIST EN 300 219-2:2001 contains clause-by-clause requirements for transmitter and receiver performance, together with the test methods needed to check them. It also gives the environmental-profile rule and the way measurement results and uncertainties are to be reported and interpreted.
Clause 5 includes the essential radio test suites for transmitter frequency error, power, emissions, timing behaviour, sensitivity, selectivity, rejection, blocking and duplex-operation performance. Table 1 gives the maximum absolute measurement uncertainties for the main RF and timing parameters.
The document is therefore a practical conformity standard: it tells users what to measure, how to measure it, and how to record the result for spectrum-related compliance.
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 300 219-2:2001 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment transmitting signals to initiate a specific response in the receiver; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive". This standard covers: To incorporate the text and tables corresponding to the sought change of status of the standard to bring it into an appropriate form as a Harmonised Standard under the R&TTE Directive (1999/5/EC)
To incorporate the text and tables corresponding to the sought change of status of the standard to bring it into an appropriate form as a Harmonised Standard under the R&TTE Directive (1999/5/EC)
SIST EN 300 219-2:2001 is classified under the following ICS (International Classification for Standards) categories: 33.060.99 - Other equipment for radiocommunications; 33.070.01 - Mobile services in general; 33.100.01 - Electromagnetic compatibility in general. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 300 219-2:2001 is associated with the following European legislation: EU Directives/Regulations: 1999/5/EC, 2010-01-3290, TRRTP124; Standardization Mandates: M/284. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 300 219-2:2001 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.EXMDQMHElectromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment transmitting signals to initiate a specific response in the receiver; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.070.01Mobilni servisi na splošnoMobile services in general33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 300 219-2 Version 1.1.1SIST EN 300 219-2:2001en01-december-2001SIST EN 300 219-2:2001SLOVENSKI
STANDARD
ETSIEN300219-2V1.1.1(2001-03)CandidateHarmonizedEuropeanStandard(Telecommunicationsseries)ElectromagneticcompatibilityandRadiospectrumMatters(ERM);LandMobileService;Radioequipmenttransmittingsignalstoinitiateaspecificresponseinthereceiver;Part2:HarmonizedENcoveringessentialrequirementsunderarticle3.2oftheR&TTEDirectiveSIST EN 300 219-2:2001
ETSIETSIEN300219-2V1.1.1(2001-03)2ReferenceREN/ERM-RP02-039-2Keywordsmobile,PMR,radio,receiver,regulation,signallingETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frCopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2001.Allrightsreserved.SIST EN 300 219-2:2001
ETSIETSIEN300219-2V1.1.1(2001-03)3ContentsIntellectualPropertyRights.5Foreword.5Introduction.61Scope.82References.83Definitions,symbolsandabbreviations.93.1Definitions.93.2Symbols.93.3Abbreviations.94Technicalspecifications.94.1Environmentalprofile.94.2Technicalrequirements.94.2.1Transmitterfrequencyerror.94.2.1.1Definition.94.2.1.2Limit.94.2.1.3Methodofmeasurement.94.2.2Carrierpower.94.2.2.1Definition.94.2.2.2Limit.104.2.2.3Methodofmeasurement.104.2.3Effectiveradiatedpower.104.2.3.1Definition.104.2.3.2Limit.104.2.3.3Methodofmeasurement.104.2.4Adjacentchannelpower.104.2.4.1Definition.104.2.4.2Limit.104.2.4.3Methodofmeasurement.104.2.5Transmitterradiatedspuriousemissions.104.2.5.1Definition.104.2.5.2Limit.104.2.5.3Methodofmeasurement.104.2.6Transmitterintermodulationattenuation.104.2.6.1Definition.104.2.6.2Limit.114.2.6.3Methodofmeasurement.114.2.7TransmitterAttacktime.114.2.7.1Definition.114.2.7.2Limit.114.2.7.3Methodofmeasurement.114.2.8Transmitterreleasetime.114.2.8.1Definition.114.2.8.2Limit.114.2.8.3Methodofmeasurement.114.2.9Transientfrequencybehaviourofthetransmitter.114.2.9.1Definition.114.2.9.2Limit.114.2.9.3Methodofmeasurement.114.2.10Maximumusablesensitivity(responses,conducted).114.2.10.1Definition.114.2.10.2Limit.124.2.10.3Methodofmeasurement.124.2.11Co-channelrejection.12SIST EN 300 219-2:2001
ETSIETSIEN300219-2V1.1.1(2001-03)44.2.11.1Definition.124.2.11.2Limit.124.2.11.3Methodofmeasurement.124.2.12Adjacentchannelselectivity.124.2.12.1Definition.124.2.12.2Limit.124.2.12.3Methodofmeasurement.124.2.13Spuriousresponserejection.124.2.13.1Definition.124.2.13.2Limit.124.2.13.3Methodofmeasurement.124.2.14Intermodulationresponserejection.124.2.14.1Definition.124.2.14.2Limit.134.2.14.3Methodofmeasurement.134.2.15Blockingordesensitization.134.2.15.1Definition.134.2.15.2Limit.134.2.15.3Methodofmeasurement.134.2.16Receiverspuriousradiations.134.2.16.1Definition.134.2.16.2Limit.134.2.16.3Methodofmeasurement.134.2.17Duplexoperationreceiverdesensitizationandmaximumusablesensitivity.134.2.17.1Definition.134.2.17.2Limit.134.2.17.3Methodofmeasurement.134.2.18Duplexoperationspuriousresponserejection.144.2.18.1Definition.144.2.18.2Limit.144.2.18.3Methodofmeasurement.145Testingforcompliancewithtechnicalrequirements.145.1Testconditions,powersupplyandambienttemperatures.145.2Interpretationofthemeasurementresults.145.3Essentialradiotestsuites.155.3.1Transmitterfrequencyerror.155.3.2Carrierpower(conducted).155.3.3Effectiveradiatedpower.155.3.4Adjacentchannelpower.155.3.5Transmitterradiatedspuriousemissions.155.3.6Intermodulationattenuation.155.3.7Transmitterattacktime.155.3.8Transmitterreleasetime.165.3.9Transientfrequencybehaviourofthetransmitter.165.4Otherradiotestsuites.165.4.1Maximumusablesensitivity(conducted,responses).165.4.2Averageusablesensitivity(fieldstrength,responses).165.4.3Co-channelrejection.165.4.4Adjacentchannelselectivity.165.4.5Spuriousresponserejection.165.4.6Intermodulationresponserejection.165.4.7Blockingordesensitization.165.4.8Receiverspuriousradiations.165.4.9Duplexoperationreceiverdesensitizationandmaximumusablesensitivity.165.4.10Duplexoperationspuriousresponserejection.16History.17SIST EN 300 219-2:2001
ETSIETSIEN300219-2V1.1.1(2001-03)5IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)w
...