SIST EN 12312-17:2005
(Main)Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment
Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment
This document specifies the technical requirements to minimise the hazards listed in Clause 4 which can arise during the commissioning, operation and maintenance of specific air conditioning equipment for aircraft ground support, when carried out in accordance with the specifications given by the manufacturer or his authorised repre-sentative. It also takes into account some requirements recognised as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airlines and handling agencies.
This document is not dealing with the hazards of air conditioning machinery itself, but with the equipment for the specific application of such machinery as aircraft ground support equipment.
This document applies to all types of moveable air conditioning equipment with evaporators for cooling, heating and ventilating the interior of civil aircraft from outside (ground air conditioning).
Examples see Annex A.
It also applies to air conditioning units and accessories, e.g. hoses, couplers, mounted on moveable parts of passenger boarding bridges and/or moveable parts of fixed centralized aircraft air conditioning equipment, whether passenger boarding bridge mounted or ramp integrated.
This document does not establish requirements for noise and vibration. Noise is dealt with in prEN 1915-4.
This document is not dealing with hazards in respect to a standard automotive chassis and the traffic on the apron.
This Part of EN 12312 is not applicable to air conditioning equipment, which is manufactured before the date of publication of this standard by CEN.
Luftfahrt-Bodengeräte - Besondere Anforderungen - Teil 17: Klimatisierungsanlagen
Dieses Dokument legt die technischen Anforderungen zur Minimierung der in Abschnitt 4 aufgelisteten Gefährdungen, die bei der Inbetriebnahme, Betrieb und Wartung von speziellen Klimatisierungsanlagen bei der Bodenversorgung an Luftfahrzeugen auftreten können, wenn diese in Übereinstimmung mit den Anweisungen des Herstellers oder seines Beauftragten ausgeführt werden. Sie berücksichtigt auch einige Funktions- und Gestaltungsanforderungen, die von offiziellen Stellen, Luftfahrzeug- und Bodengeräteherstellern sowie Luftverkehrs- und Abfertigungsgesellschaften als wesentlich erachtet wurden.
Dieses Dokument behandelt nicht die Gefährdungen, die von einer Klimatisierungsanlage als solches ausgehen, sondern die spezielle Anwendung dieser Anlagen als Luftfahrt Bodengeräte.
Dieses Dokument gilt für alle beweglichen Klimatisierungsanlagen mit Verdampfern für das Kühlen und für das Heizen und Lüften der Kabine von zivilen Luftfahrzeugen von außen (Klimatisierung am Boden).
Beispiele siehe Anhang A.
Es gilt auch für Klimatisierungsanlagen und Zubehör, wie Schläuche und Kupplungen, die an beweglichen Teilen von Fluggastbrücken montiert sind und/oder bewegliche Bauteile von festen, zentralen Klimatisierungsanlagen für Luftfahrzeuge, die an Fluggastbrücken angebracht oder in das Vorfeld integriert sind.
Dieses Dokument enthält keine Festlegungen hinsichtlich Lärm und Schwingungen.
Lärm und Schwingungen werden in prEN 1915 4 bzw. prEN 1915 3 behandelt.
Dieses Dokument behandelt keine Gefährdungen, die von einem Serienfahrgestell und vom Verkehr auf dem Vorfeld ausgehen.
Dieser Teil von EN 12312 gilt nicht für Klimatisierungsanlagen, die vor der Veröffentlichung dieser Norm durch CEN hergestellt wurden.
Matériel au sol pour aéronefs - Exigences particulieres - Partie 17: Matériels de climatisation
Le présent document définit les exigences techniques pour minimiser les dangers listés au paragraphe 4 qui pourraient intervenir tout au long de la mise en service, de l'exploitation et de la maintenance des groupes de climatisation pour service au sol d'aéronefs, lorsqu'elles sont effectuées en accord avec les spécifications fournies par le fabricant ou son représentant autorisé. Elle tient compte également d'exigences reconnues essentielles par les autorités, les fabricants d'aéronefs et de matériels de service au sol ainsi que les compagnies aériennes et les organismes d'assistance.
Le présent document ne traite pas des dangers des machines de conditionnement d'air elles-memes, mais des équipements pour leur application spécifique en tant que matériels de service au sol d'aéronefs.
Le présent document s'applique a tous les types de groupes de climatisation mobiles destinés a rafraîchir, chauffer ou ventiler l'intérieur d'un aéronef civil a partir de l'extérieur (climatisation au sol).
Voir des exemples en annexe A.
Elle s'applique également aux groupes et accessoires (tuyaux flexibles, dispositifs d'accouplement) de climatisation fixés sur des parties mobiles des passerelles passagers et/ou sur des parties mobiles des systemes fixes centralisés de climatisation d'aéronefs, qu'ils soient installés sur une passerelle passagers ou intégrés a l'aire de stationnement.
Le présent document ne prescrit pas d'exigences pour le bruit et les vibrations.
Le bruit et les vibrations sont traités respectivement dans le prEN 1915-4 et le prEN 1915-3.
Le présent document ne traite pas des dangers liés a un châssis automobile standard et au trafic sur l'aire de stationnement.
La présente partie de l'EN 12312 ne s'applique pas aux matériels de climatisation fabriqués avant la date de publication de cette norme européenne par le CEN.
Podporna oprema na tleh za letalski promet – Posebne zahteve – 17. del: Oprema za klimatizacijo
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 12312-17:2005
01-januar-2005
Podporna oprema na tleh za letalski promet – Posebne zahteve – 17. del: Oprema
za klimatizacijo
Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning
equipment
Luftfahrt-Bodengeräte - Besondere Anforderungen - Teil 17: Klimatisierungsanlagen
Matériel au sol pour aéronefs - Exigences particulieres - Partie 17: Matériels de
climatisation
Ta slovenski standard je istoveten z: EN 12312-17:2004
ICS:
49.100 Oprema za servis in Ground service and
vzdrževanje na tleh maintenance equipment
SIST EN 12312-17:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 12312-17
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2004
ICS 49.100
English version
Aircraft ground support equipment - Specific requirements - Part
17: Air conditioning equipment
Matériel au sol pour aéronefs - Exigences particulières - Luftfahrt-Bodengeräte - Besondere Anforderungen - Teil
Partie 17: Matériels de climatisation 17: Klimatisierungsanlagen
This European Standard was approved by CEN on 6 May 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12312-17:2004: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN 12312-17:2004 (E)
Contents
page
Foreword.3
Introduction .4
1 Scope.5
2 Normative references.5
3 Terms and definitions .5
4 List of hazards.6
5 Safety requirements and/or measures .6
5.1 General requirements.6
5.2 Electrical power supplies.7
5.3 Air delivery hoses and couplers .7
5.4 Fixed equipment.7
5.5 Controls, monitoring devices and displays .7
6 Information for use .7
6.1 Marking.7
6.2 Safety signs.8
6.3 Instructions.8
7 Verification of requirements.8
Annex A (informative) Examples of air conditioning equipment .9
Annex B (normative) List of hazards in addition to those of EN 1915-1 .11
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive Machinery 98/37/EC, amended by Directive 98/79/EC.13
Bibliography .14
2
---------------------- Page: 3 ----------------------
EN 12312-17:2004 (E)
Foreword
This document (EN 12312-17:2004) has been prepared by Technical Committee CEN/TC 274 "Aircraft ground
support equipment", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by January 2005, and conflicting national standards shall be withdrawn at the latest
by January 2005.
This document has been prepared under a mandate given to CEN by the European Commission and the European
Free Trade Association and supports essential requirements of EU Directive(s).
For relationship with EU Directives, see informative Annex ZA, which is an integral part of this document.
The Parts of EN 12312 — Aircraft ground support equipment — Specific requirements — are:
Part 1: Passenger stairs
Part 2: Catering vehicles
Part 3: Conveyor belt vehicles
Part 4: Passenger boarding bridges
Part 5: Aircraft fuelling equipment
Part 6: Deicers and deicing/antiicing equipment
Part 7: Aircraft movement equipment
Part 8: Maintenance stairs and platforms
Part 9: Container/Pallet loaders
Part 10: Container/Pallet transfer transporters
Part 11: Container/Pallet dollies and loose load trailers
Part 12: Potable water service equipment
Part 13: Lavatory service equipment
Part 14: Disabled/Incapacitated passenger boarding equipment
Part 15: Baggage and equipment tractors
Part 16: Air start equipment
Part 17: Air conditioning equipment
Part 18: Nitrogen or Oxygen units
Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions
Part 20: Ground power equipment
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
3
---------------------- Page: 4 ----------------------
EN 12312-17:2004 (E)
Introduction
This document specifies health and safety requirements, as well as some functional and performance requirements
for air conditioning equipment intended to be used for all aircraft types commonly in service in civil air transport.
The minimum essential criteria are considered to be of primary importance in providing safe, serviceable,
economical and practical air conditioning equipment. Deviations from the recommended criteria should occur only
after careful consideration, extensive testing, risk assessment and thorough service evaluation have shown
alternative methods or conditions to be satisfactory.
This document is a Type C standard as stated in EN 1070:1998.
The machinery concerned and the extent to which hazards, hazardous situations and events are covered are
indicated in the scope of this document.
When provisions of this type C standard are different from those, which are stated in type A or B standards, the
provisions of this type C standard take precedence over the provisions of the other standards, for machines that
have been designed and built according to the provisions of this type C standard.
4
---------------------- Page: 5 ----------------------
EN 12312-17:2004 (E)
1 Scope
This document specifies the technical requirements to minimise the hazards listed in Clause 4 which can arise
during the commissioning, operation and maintenance of specific air conditioning equipment for aircraft ground
support, when carried out in accordance with the specifications given by the manufacturer or his authorised repre-
sentative. It also takes into account some performance requirements recognised as essential by authorities, aircraft
and ground support equipment (GSE) manufacturers as well as airlines and handling agencies.
This document is not dealing with the hazards of air conditioning machinery itself, but with the equipment for the
specific application of such machinery as aircraft ground support equipment.
This document applies to all types of moveable air conditioning equipment with evaporators for cooling, heating
and ventilating the interior of civil aircraft from outside (ground air conditioning).
Examples see Annex A.
It also applies to air conditioning units and accessories, e.g. hoses, couplers, mounted on moveable parts of
passenger boarding bridges and/or moveable parts of fixed centralized aircraft air conditioning equipment, whether
passenger boarding bridge mounted or ramp integrated.
This document does not establish requirements for noise and vibration
Noise and vibration are dealt with respectively in prEN 1915-4 and prEN 1915-3.
This document is not dealing with hazards in respect to a standard automotive chassis and the traffic on the apron.
This Part of EN 12312 is not applicable to air conditioning equipment, which is manufactured before the date of
publication of this standard by CEN.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references,
only the edition cited applies. For undated references, the latest edition of the referenced document (including any
amendments) applies.
EN 294:1992, Safety of machinery — Safety distance to prevent danger zones being reached by the upper limbs
EN 418:1992, Safety of machinery — Emergency stop equipment, functional aspects — Principles for design
EN 779:2002, Particulate air filters for general ventilation — Determination of the filtration performance
EN 1050:1996, Safety of machinery — Principles for risk assessment
EN 1070:1998, Safety of machinery — Terminology
EN 1915-1:2001, Aircraft ground support equipment - General requirements — Part 1: Basic safety requirements
EN 1915-2:2001, Aircraft ground support equipment; General requirements — Part 2: Stability and strength
requirements, calculations and test methods
ISO 1034:1973, Aircraft — Ground air-conditioning connections
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 1070:1998, EN 1915-1:2001 and the
following apply.
5
---------------------- Page: 6 ----------------------
EN 12312-17:2004 (E)
3.1
air conditioning equipment
ground support equipment (GSE) designed for cooling, heating and/or ventilating the interior of aircraft
3.2
air conditioning unit
self-contained air conditioning equipment
3.3
air delive
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.