Building hardware - Requirements and test methods for windows and doors height windows - Part 12: Side hung projecting reversible hardware

This part of prEN 13126 specifies the requirements and test methods for durability, strength, security and function of side hung projecting reversible hardware for windows.

Baubeschläge - Anforderungen und Prüfverfahren für Fenster und Fenstertüren - Teil 12: Beschläge für auskragende Drehflügel-Umkehrfenster

Dieser Teil von prEN 13126 legt die Anforderungen und Prüfverfahren für die Dauerfunktionstüchtigkeit,
Festigkeit, Schutzwirkung und Funktionsweise von Beschlägen für auskragende Drehflügel-Umkehrfenster
fest.
ANMERKUNG Diese Europäische Norm ist für Beschläge für auskragende Drehflügel-Umkehrfenster anwendbar, die
mit eingebauten Vorrichtungen zur Begrenzung des Öffnungswinkels versehen sein können, aber nicht müssen.

Quincaillerie pour le bâtiment - Exigences et méthodes d'essai des ferrures de fenêtres et portes-fenêtres - Partie 12: Ferrures pour ouvrants à projection de l’axe latéral réversibles

La présente partie de l’EN 13126 spécifie les exigences et les méthodes d’essai relatives à l’endurance, à la résistance, à la sécurité des biens et au fonctionnement des ferrures pour ouvrants à projection de l’axe latéral réversibles pour les fenêtres.
NOTE   La présente Norme européenne est applicable aux ferrures pour ouvrants à projection de l’axe latéral réversibles qu’elles soient équipées ou non de limitateur d’ouverture intégré.

Stavbno okovje - Zahteve in preskusne metode za okna in zastekljena vrata - 12. del: Obrnjeno okovje za izbočena okna z vrtljivimi krili

General Information

Status
Published
Public Enquiry End Date
13-Jul-2008
Publication Date
09-Feb-2009
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
09-Dec-2008
Due Date
13-Feb-2009
Completion Date
10-Feb-2009

Relations

Buy Standard

Standard
EN 13126-12:2009
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k prEN 13126-12:2008
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Baubeschläge - Anforderungen und Prüfverfahren für Fenster und Fenstertüren - Teil 12: Beschläge für auskragende Drehflügel-UmkehrfensterQuincaillerie pour le bâtiment - Exigences et méthodes d'essai des ferrures de fenêtres et portes-fenêtres - Partie 12: Ferrures pour ouvrants à projection de l’axe latéral réversiblesBuilding hardware - Requirements and test methods for windows and doors height windows - Part 12: Side hung projecting reversible hardware91.190Stavbna opremaBuilding accessoriesICS:Ta slovenski standard je istoveten z:EN 13126-12:2008SIST EN 13126-12:2009en,fr,de01-marec-2009SIST EN 13126-12:2009SLOVENSKI
STANDARDSIST-TS CEN/TS 13126-12:20051DGRPHãþD



SIST EN 13126-12:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13126-12November 2008ICS 91.190Supersedes CEN/TS 13126-12:2004
English VersionBuilding hardware - Requirements and test methods for windowsand doors height windows - Part 12: Side hung projectingreversible hardwareQuincaillerie pour le bâtiment - Exigences et méthodesd'essai des ferrures de fenêtres et portes-fenêtres - Partie12: Ferrures pour ouvrants à projection de l'axe latéralréversiblesBaubeschläge - Beschläge für Fenster und Fenstertüren -Anforderungen und Prüfverfahren - Teil 12: Beschläge fürauskragende Drehflügel-UmkehrfensterThis European Standard was approved by CEN on 5 October 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13126-12:2008: ESIST EN 13126-12:2009



EN 13126-12:2008 (E) 2 Contents Page Foreword.3 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Classification.6 4.1 General.6 4.2 Category of use (1 – first digit).6 4.3 Durability (2 – second digit).6 4.4 Mass (3 – third digit).6 4.5 Fire resistance (4 – fourth digit).6 4.6 Safety in use (5 – fifth digit).6 4.7 Corrosion resistance (6 – sixth digit).6 4.8 Security (7 – seventh digit).6 4.9 Application (8 – eighth digit).6 4.10 Test sizes – Size limitations (9 – ninth digit).6 4.11 Example of classification for side hung projecting reversible hardware.7 5 Requirements.7 5.1 General.7 5.2 Integrated restrictors.7 5.3 Ease of sash movement test.8 5.4 Durability test.8 5.5 Obstructed track test.8 5.6 Static load test.8 5.7 Additional load test.8 6 Test equipment.9 7 Test methods.9 7.1 Samples.9 7.2 Ease of sash movement test procedure.9 7.3 Durability test procedure.10 7.4 Obstructed track test procedure.10 7.5 Static load test procedure.10 7.6 Additional load test procedure.11 7.7 Corrosion resistance.11 Annex A (informative)
Test method diagrams.12 Annex B (normative)
Flow chart of test procedure.13
SIST EN 13126-12:2009



EN 13126-12:2008 (E) 3 Foreword This document (EN 13126-12:2008) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2009, and conflicting national standards shall be withdrawn at the latest by May 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes CEN/TS 13126-12:2004. This European Standard is one of a series of European Standards dedicated to building hardware products. A full contribution to the preparation of this European Standard has been made by the European manufacturers´ organization “ARGE” and national standards bodies. EN 13126 Building hardware — Requirements and test methods for windows and doors height windows consists of the following parts: Part 1: Requirements common to all types of hardware Part 2: Casement fastener handles1) Part 3: Manoeuvring fittings for espagnolette bolts/sliding button1) Part 4: Espagnolette bolts1) Part 5: Devices that restrict the opening of windows1) Part 6: Variable geometry stay hinges (with or without a friction system) Part 7: Finger catches Part 8: Tilt&Turn, Tilt-First and Turn-Only hardware Part 9: Pivot hinges1) Part 10: Arm balancing systems Part 11: Top hung projecting reversible hardware Part 12: Side hung projecting reversible hardware Part 13: Sash balances1)
1) To be revised, for the time being CEN/TS. SIST EN 13126-12:2009



EN 13126-12:2008 (E) 4 Part 14: Sash fasteners1) Part 15: Rollers for horizontal sliding and sliding folding windows and doors Part 16: Hardware for Lift&Slide windows and doors Part 17: Hardware for Tilt&Slide windows and doors Part 18: Fan light openers for windows and door height windows Part 19: Sliding Closing Devices (SCD) for windows and door height windows Informative Annex A of EN 13126-1:2006 gives detailed schedules of the elements of components of the 17 first parts of this European Standard. Informative Annex A of EN 13126-1:2006 depicts the “list of parts and titles and their reference to the relevant window types” of the seventeen parts of this European Standard. Informative Annex B of EN 13126-1:2006 gives schedules of the elements of components used on the 21 types of window opening functions. The performance tests incorporated in this European Standard are considered to be reproducible and as such will provide a consistent and objective assessment of the performance of these products throughout CEN Member States. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 13126-12:2009



EN 13126-12:2008 (E) 5 1 Scope This part of EN 13126 specifies the requirements and test methods for durability, strength, security and function of side hung projecting reversible hardware for windows. NOTE This European Standard is applicable to side hung projecting reversible hardware whether fitted with integral restrictors or not. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1670, Building hardware — Corrosion resistance — Requirements and test methods EN 12519:2004, Windows and pedestrian doors — Terminology EN 13126-1:2006, Building hardware — Requirements and test methods for windows and doors height windows — Part 1: Requirements common to all types of hardware CEN/TS 13126-5, Building hardware, fittings for windows and door height windows — Requirements and test methods — Part 5: Devices that restrict the opening of windows ISO 4520:1981, Chromate conversion coatings on electroplated zinc and cadmium coatings 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13126-1:2006 and
EN 12519:2004 and the following apply NOTE The following terms and definitions apply to windows made of wood, PVC-u, aluminium or steel and their appropriate material combinations. 3.1 pivot retainer device (may be integrated onto hinge arm system) fitted to the sash to hold it during rotation on hinge mechanism 3.2 integrated restrictor mechanism that is an integral part of the side hung Projecting reversible hardware that limits the initial opening of the window and may or may not also hold an opening light firmly in the reverse position 3.3 top slider assembly consisting of plate and swivel bracket fitted to a sash, which guides movement in a horizont
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Building hardware - Requirements and test methods for windows and doors height windows - Part 12: Side hung projecting reversible hardwareQuincaillerie pour le bâtiment - Exigences et méthodes d'essai des ferrures de fenêtres et portes-fenêtres - Partie 12: Ferrures pour ouvrants à projection de l’axe latéral réversiblesBaubeschläge - Anforderungen und Prüfverfahren für Fenster und Fenstertüren - Teil 12: Beschläge für auskragende Drehflügel-Umkehrfenster91.190Stavbna opremaBuilding accessoriesICS:kSIST prEN 13126-12:2008enTa slovenski standard je istoveten z:prEN 13126-1201-junij-2008kSIST prEN 13126-12:2008SLOVENSKI
STANDARD







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMFINAL DRAFTprEN 13126-12April 2008ICS 91.190Will supersede CEN/TS 13126-12:2004
English VersionBuilding hardware - Requirements and test methods for windowsand doors height windows - Part 12: Side hung projectingreversible hardwareQuincaillerie pour le bâtiment - Exigences et méthodesd'essai des ferrures de fenêtres et portes-fenêtres - Partie12: Ferrures pour ouvrants à projection de l'axe latéralréversiblesBaubeschläge - Anforderungen und Prüfverfahren fürFenster und Fenstertüren - Teil 12: Beschläge fürauskragende Drehflügel-UmkehrfensterThis draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the TechnicalCommittee CEN/TC 33.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations whichstipulate the conditions for giving this European Standard the status of a national standard without any alteration.This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other languagemade by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has thesame status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice andshall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. prEN 13126-12:2008: E



prEN 13126-12:2008 (E) 2 Contents Page Foreword.3 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Classification.6 4.1 General.6 4.2 Category of use (1 – first digit).6 4.3 Durability (2 – second digit).6 4.4 Mass (3 – third digit).6 4.5 Fire resistance (4 – fourth digit).6 4.6 Safety in use (5 – fifth digit).6 4.7 Corrosion resistance (6 – sixth digit).6 4.8 Security (7 – seventh digit).6 4.9 Application (8 – eighth digit).6 4.10 Test sizes – Size limitations (9 – ninth digit).6 4.11 Example of classification for side hung projecting reversible hardware.7 5 Requirements.7 5.1 General.7 5.2 Integrated restrictors.7 5.3 Ease of sash movement test.8 5.4 Durability test.8 5.5 Obstructed track test.8 5.6 Static load test.8 5.7 Additional load test.8 6 Test equipment.9 7 Test methods.9 7.1 Samples.9 7.2 Ease of sash movement test procedure.9 7.3 Durability test procedure.10 7.4 Obstructed track test procedure.10 7.5 Static load test procedure.10 7.6 Additional load test procedure.11 7.7 Corrosion resistance.11 Annex A (informative)
Test method diagrams.12 Annex B (normative)
Flow chart of test procedure.14



prEN 13126-12:2008 (E) 3 Foreword This document (prEN 13126-12:2008) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR. This document is currently submitted to the Unique Acceptance Procedure. A full contribution to the preparation of this European Standard has been made by the European manufacturers´ organization "ARGE" and national standards bodies. EN 13126 Building hardware — Requirements and test methods for windows and doors height windows consists of the following parts: Part 1: Requirements common to all types of hardware Part 2: Casement fastener handles1) Part 3: Manoeuvring fittings for espagnolette bolts/sliding button1) Part 4: Espagnolette bolts1) Part 5: Devices that restrict the opening of windows1) Part 6: Variable geometry stay hinges (with or without a friction system)1) Part 7: Finger catches Part 8: Tilt&Turn, Tilt-First and Turn-Only hardware Part 9: Pivot hinges1) Part 10: Arm balancing systems1) Part 11: Top hung projecting reversible hardware1) Part 12: Side hung projecting reversible hardware1) Part 13: Sash balances1) Part 14: Sash fasteners1) Part 15: Rollers for horizontal sliding and sliding folding windows and doors Part 16: Hardware for Lift&Slide windows and doors Part 17: Hardware for Tilt&Slide windows and doors Informative Annex A of EN 13126-1:2006 gives detailed schedules of the elements of components of the 17 parts of this European Standard.
1) To be revised, for the time being CEN/TS.



prEN 13126-12:2008 (E) 4 Informative Annex A of EN 13126-1:2006 depicts the “list of parts and titles and their reference to the relevant window types” of the seventeen parts of this European Standard. Normative Annex B of EN 13126-1:2006 gives schedules of the elements of components used on the 21 types of window opening functions. The performance tests incorporated in this standard are considered to be reproducible and as such will provide a consistent and objective assessment of the performance of these products throughout CEN Member States.



prEN 13126-12:2008 (E) 5 1 Scope This part of prEN 13126 specifies the requirements and test methods for durability, strength, security and function of side hung projecting reversible hardware for windows. NOTE This European Standard is applicable to side hung projecting reversible hardware whether fitted with integral restrictors or not. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12519:2004, Windows and pedestrian doors — Terminology EN 13126-1:2006, Building hardware — Requirements and test methods for windows and doors height windows — Part 1: Requirements common to all types of hardware CEN/TS 13126-5, Building hardware, fittings for windows and door height windows — Requirements and test methods — Part 5: Devices that restrict the opening of windows EN 1670, Building hardware — Corrosion resistance — Requirements and test methods ISO 4520:1981, Chromate conversion coatings on electroplated zinc and cadmium coatings 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13126-1:2006 and
EN 12519:2004 and the following apply NOTE The following terms and definitions apply to windows made of wood, PVC-u, aluminium or steel and their appropriate material combinations. 3.1 pivot retainer device (may be integrated onto hinge arm system) fitted to the sash to hold it during rotation on hinge mechanism 3.2 integrated restrictor mechanism that is an integral part of the side hung Projecting reversible hardware that limits the initial opening of the window and may or may not also hold an opening light firmly in the reverse position 3.3 top slider assembly consisting of plate and swivel bracket fitted to a sash, which guides movement in a horizontal plane 3.4 bottom slider assembly consisting of plate and swivel bracket fitted to sash, which guides movement in horizontal plane



prEN 13126-12:2008 (E) 6 3.5 side hung projecting reversible hinge mechanism consisting of sliding rails and moving arms fitted into the upper and lower sections of the window frame, to support the sash allowing it to open outwardly, without projecting into the room, and to be reversed for cleaning from inside the room 4 Classification 4
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.