SIST EN 60335-2-86:2024

SLOVENSKI STANDARD
01-februar-2024
Gospodinjski in podobni električni aparati - Varnost - 2-86. del: Posebne zahteve
za električne ribiške naprave (IEC 60335-2-86:2018)
Household and similar electrical appliances - Safety - Part 2-86: Particular requirements
for electric fishing machines (IEC 60335-2-86:2018)
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-86:
Besondere Anforderungen für elektrische Fischereigeräte (IEC 60335-2-86:2018)
Appareils électrodomestiques et analogues - Sécurité - Partie 2-86: Règles particulières
pour les équipements électriques de pêche (IEC 60335-2-86:2018)
Ta slovenski standard je istoveten z: EN IEC 60335-2-86:2023
ICS:
65.150 Ribolov in ribogojstvo Fishing and fish breeding
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60335-2-86

NORME EUROPÉENNE
EUROPÄISCHE NORM December 2023
ICS 65.150 Supersedes EN 60335-2-86:2003; EN 60335-2-
86:2003/A1:2005; EN 60335-2-86:2003/A11:2016; EN
60335-2-86:2003/A2:2016; EN 60335-2-
86:2003/A12:2017
English Version
Household and similar electrical appliances - Safety - Part 2-86:
Particular requirements for electric fishing machines
(IEC 60335-2-86:2018)
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-86: Exigences particulières pour les équipements ähnliche Zwecke - Teil 2-86: Besondere Anforderungen für
électriques de pêche elektrische Fischereigeräte
(IEC 60335-2-86:2018) (IEC 60335-2-86:2018)
This European Standard was approved by CENELEC on 2023-11-22. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60335-2-86:2023 E

European foreword
This document (EN IEC 60335-2-86:2023) consists of the text of IEC 60335-2-86:2018 prepared by IEC/TC 61
"Safety of household and similar electrical appliances".
The following dates are fixed:
• latest date by which this document has to be (dop) 2024-11-22
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) 2026-11-22
conflicting with this document have to be
withdrawn
This document supersedes EN 60335-2-86:2003 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document is read in conjunction with EN IEC 60335-2-86:2023/A11:2023.
Any feedback and questions on this document should be directed to the users’ national committee. A complete
listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60335-2-86:2018 was approved by CENELEC as a European
Standard without any modification.

IEC 60335-2-86 ®
Edition 3.0 2018-04
INTERNATIONAL
STANDARD
colour
inside
Household and similar electrical appliances – Safety –

Part 2-86: Particular requirements for electric fishing machines

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 65.150 ISBN 978-2-8322-5569-8

– 2 – IEC 60335-2-86:2018 © IEC 2018
CONTENTS
FOREWORD . 3
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 General requirement . 9
5 General conditions for the tests . 9
6 Classification . 10
7 Marking and instructions . 10
8 Protection against access to live parts . 11
9 Starting of motor-operated appliances . 12
10 Power input and current . 12
11 Heating . 12
12 Void . 12
13 Leakage current and electric strength at operating temperature . 12
14 Transient overvoltages . 12
15 Moisture resistance . 13
16 Leakage current and electric strength . 13
17 Overload protection of transformers and associated circuits . 13
18 Endurance . 13
19 Abnormal operation . 13
20 Stability and mechanical hazards . 13
21 Mechanical strength . 13
22 Construction . 13
23 Internal wiring . 16
24 Components . 16
25 Supply connection and external flexible cords . 16
26 Terminals for external conductors . 16
27 Provision for earthing . 17
28 Screws and connections . 17
29 Clearances, creepage distances and solid insulation . 17
30 Resistance to heat and fire . 17
31 Resistance to rusting . 17
32 Radiation, toxicity and similar hazards . 18
Annexes . 19
Annex A (informative) Routine tests . 19
Annex S (normative) Battery-operated appliances powered by batteries that are non-
rechargeable or not recharged in the appliance . 20
Annex AA (normative) Boat mounted electric fishing machines . 23
Bibliography . 25

IEC 60335-2-86:2018 © IEC 2018 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-86: Particular requirements for electric fishing machines

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
This part of International Standard IEC 60335 has been prepared by subcommittee 61H:
Safety of electrically-operated farm appliances, of IEC technical committee 61: Safety of
household and similar electrical appliances.
This third edition cancels and replaces the second edition published in 2002, its Amendment 1
(2005) and its Amendment 2 (2012). This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
– aligns the text with IEC 60335-1, Ed 5, and its Amendments 1 and 2;
– some notes have been converted to normative text (22.102, 22.113, 26.106);
– requirements for battery-operated electric fishing machines have been moved to Annex S.

– 4 – IEC 60335-2-86:2018 © IEC 2018
The text of this International Standard is based on the following documents:
FDIS Report on voting
61H/363/FDIS 61H/365/RVD
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 60335 series, under the general title: Household and similar
electrical appliances – Safety, can be found on the IEC website.
This Part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its
amendments. It was established on the basis of the fifth edition (2010) of that standard.
NOTE 1 When “Part 1” is mentioned in this standard, it refers to IEC 60335-1.
This part 2 supplements or modifies the corresponding clauses in IEC 60335-1, so as to
convert that publication into the IEC standard: Safety requirements for electric fishing
machines.
When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies
as far as is reasonable. When this standard states “addition”, “modification” or “replacement”,
the relevant text in Part 1 is to be adapted accordingly.
NOTE 2 The following numbering system is used:
– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;
– unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including
those in a replaced clause or subclause;
– additional annexes are lettered AA, BB, etc.
NOTE 3 The following print types are used:
– requirements: in roman type
– test specifications: in italic type
– notes: in small roman type.
Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and
associated noun are also in bold.
NOTE 4 The attention of National Committees is drawn to the fact that equipment manufacturers and testing
organizations may need a transitional period following publication of a new, amended or revised IEC publication in
which to make products in accordance with the new requirements and to equip themselves for conducting new or
revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation
nationally not earlier than 12 months or later than 36 months from the date of publication.

IEC 60335-2-86:2018 © IEC 2018 – 5 –
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
– 6 – IEC 60335-2-86:2018 © IEC 2018
INTRODUCTION
It has been assumed in the drafting of this International Standard that the execution of its
provisions is entrusted to appropriately qualified and experienced persons.
This standard recognizes the internationally accepted level of protection against hazards such
as electrical, mechanical, thermal, fire and radiation of appliances when operated as in
normal use taking into account the manufacturer's instructions. It also covers abnormal
situations that can be expected in practice and takes into account the way in which
electromagnetic phenomena can affect the safe operation of appliances.
This standard takes into account the requirements of IEC 60364 as far as possible so that
there is compatibility with the wiring rules when the appliance is connected to the supply
mains. However, national wiring rules may differ.
If an appliance within the scope of this standard also incorporates functions that are covered
by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as
far as is reasonable. If applicable, the influence of one function on the other is taken into
account.
NOTE 1 Throughout this publication, when “Part 1” is mentioned, it refers to IEC 60335-1.
When a part 2 standard does not include additional requirements to cover hazards dealt with
in Part 1, Part 1 applies.
NOTE 2 This means that the technical committees responsible for the part 2 standards have determined that it is
not necessary to specify particular requirements for the appliance in question over and above the general
requirements.
This standard is a product family standard dealing with the safety of appliances and takes
precedence over horizontal and generic standards covering the same subject.
NOTE 3 Horizontal and generic standards covering a hazard are not applicable since they have been taken into
consideration when developing the general and particular requirements for the IEC 60335 series of standards. For
example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as
ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 or part 2 standards.

IEC 60335-2-86:2018 © IEC 2018 – 7 –
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-86: Particular requirements for electric fishing machines

1 Scope
This clause of Part 1 is replaced by the following.
This part of IEC 60335 deals with the safety of electric fishing machines by means of which
water may be electrified for the purpose of catching fish or for providing barriers to all animals
living in water.
The rated voltage of electric fishing machines is not more than 250 V for single phase
machines and 480 V for other machines, except that the rated voltage of electric fishing
machines for permanent connection to fixed wiring is not more than 1 000 V.
Electric fishing machines are appliances for scientific and commercial use.
Additional requirements for boat mounted electric fishing machines are given in Annex AA.
NOTE 101 Examples of electric fishing machines coming within the scope of this standard are:
– mains-operated electric fishing machines which include those supplied from portable or stationary generator
sets;
– battery-operated electric fishing machines.
NOTE 102 Attention is drawn to the fact that
– for appliances intended to be used on board ships or boats, additional requirements can be necessary;
– in many countries, additional requirements are specified by the national health authorities, the national
authorities responsible for the protection of labour, the national water supply authorities and similar authorities.
NOTE 103 This standard does not apply to
– electric fence energizers (IEC 60335-2-76);
– electric animal stunning equipment (IEC 60335-2-87);
– shark deterrent devices that are carried by the user.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition
cited applies. For undated references, the latest edition of the referenced document (including
any amendments) applies.
This clause of Part 1 is applicable except as follows.
Addition:
IEC 60068-2-52, Environmental testing – Part 2: Tests – Test Kb: Salt mist, cyclic (sodium
chloride solution)
IEC 61558-2-4, Safety of transformers, reactors, power supply units and similar products for
supply voltages up to 1 100 V – Part 2-4: Particular requirements and tests for isolating
transformers and power supply units incorporating isolating transformers

– 8 – IEC 60335-2-86:2018 © IEC 2018
3 Terms and definitions
This clause of Part 1 is applicable except as follows.
3.1 Definitions relating to physical characteristics
3.1.1 Addition:
Note 101 to entry: The rated voltage is the rated input voltage.
3.1.6 Addition:
Note 102 to entry: The rated current is the rated input current.
3.1.9 Replacement:
normal operation
operation of the appliance under the following conditions:
The electric fishing machine is operated as in normal use when connected to the supply
with an adjustable non-inductive resistor connected between its output terminals. The resistor
is adjusted so as to give an output current just sufficient not to cause any protective device
to operate
3.1.101
output voltage
voltage between the electrodes
3.1.102
output current
current in the output circuit that the electric fishing machine is designed to supply
3.1.103
pulsed voltage
voltage impulse of any form and any duration
3.1.104
impulse
that part of the pulsed voltage output that exceeds 12 V
3.5 Definitions relating to types of appliances
3.5.101
electric fishing machine
appliance, comprising electrodes and an energizer, that is designed or used for the control,
taking, killing of any species of fish or invertebrate living in water or for the production of
electronarcosis, by means of electric current
Note 1 to entry: An electric fishing machine may be used to provide a barrier effective for all animals living in
water.
Note 2 to entry: A given electric fishing machine may only perform some of the functions specified.
3.5.102
mains-operated electric fishing machine
electric fishing machine designed for direct connection to a supply other than a battery
supply at a voltage greater than safety extra-low voltage
Note 1 to entry: It may also be supplied from a generator set.

IEC 60335-2-86:2018 © IEC 2018 – 9 –
3.5.103
battery-operated electric fishing machine
electric fishing machine deriving its energy solely from non-rechargeable batteries,
rechargeable batteries or other sources of energy, with a voltage meeting the requirements
for safety extra-low voltage
3.6 Definitions relating to parts of an appliance
3.6.3 Addition:
Note 101 to entry: It also includes terminals for the connection of the battery and other metal parts in a battery
compartment that become accessible when batteries are replaced, even with the aid of a tool.
3.6.4 Replacement:
live part
conductive part that may cause an electric shock
3.6.101
electrode
that part of an electric fishing machine that transfers the electric power into the water
Note 1 to entry: The catching electrode is the electrode used by the fisherman, the return electrode is the
electrode trailed in the water.
Note 2 to entry: The catching electrode is usually the anode and the return electrode is usually the cathode.
Note 3 to entry: This does not preclude the return electrode being held by the user.
3.6.102
energizer
that part of an electric fishing machine that transfers the elect
...