SIST EN 3155-009:2009

SLOVENSKI STANDARD
SIST EN 3155-009:2009
01-januar-2009
$HURQDYWLND(OHNWULþQLNRQWDNWL]DXSRUDERYYH]QLKHOHPHQWLKGHO
.RQWDNWLHOHNWULþQLåHQVNLWLS$QDJXEDQLUD]UHG66WDQGDUG]DSURL]YRG
Aerospace series - Electrical contacts used in elements of connection - Part 009:
Contacts, electrical, female, type A, crimp, class S - Product standard
Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen -
Teil 009: Elektrische Buchsenkontakte, Typ A, crimpbar, Klasse S - Produktnorm
Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie
009 : Contacts électriques, femelles, type A, à sertir, classe S - Norme de produit
Ta slovenski standard je istoveten z: EN 3155-009:2006
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 3155-009:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 3155-009:2009

---------------------- Page: 2 ----------------------

SIST EN 3155-009:2009
EUROPEAN STANDARD
EN 3155-009
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2006
ICS 49.060

English Version
Aerospace series - Electrical contacts used in elements of
connection - Part 009: Contacts, electrical, female, type A,
crimp, class S - Product standard
Série aérospatiale - Contacts électriques utilisés dans les Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung
organes de connexion - Partie 009 : Contacts électriques, in Verbindungselementen - Teil 009: Elektrische
femelles, type A, à sertir, classe S - Norme de produit Buchsenkontakte, Typ A, crimpbar, Klasse S -
Produktnorm
This European Standard was approved by CEN on 3 February 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3155-009:2006: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 3155-009:2009
EN 3155-009:2006 (E)
Contents Page
Foreword.3
0 Introduction.4
1 Scope .4
2 Normative references .4
3 Definitions .5
4 Required characteristics.5
4.1 Specific characteristics.5
4.2 Dimensions and mass.5
4.3 Marking by colour code .8
4.4 Material, surface treatment.8
4.5 Permissible cables .8
4.6 Tooling .9
4.7 Cable stripping. 11
4.8 Tests. 12
4.9 Gauges. 13
5 Designation . 13
6 Marking . 14
7 Technical specification . 14

2

---------------------- Page: 4 ----------------------

SIST EN 3155-009:2009
EN 3155-009:2006 (E)
Foreword
This European Standard (EN 3155-009:2006) has been prepared by the AeroSpace and Defense Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has re-
ceived the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2007, and conflicting national standards shall be withdrawn at
the latest by January 2007.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den-
mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem-
bourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer-
land and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 3155-009:2009
EN 3155-009:2006 (E)
0 Introduction
The contacts defined by this standard are derived from those of MIL-C-39029/56 and, intermateable with those of MIL-C-
39029/58.
1 Scope
This standard specifies the required characteristics, tests and tooling applicable to female electrical contacts 009, type A,
crimp, class S, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated male contacts are defined in EN 3155-008.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the
edition cited applies. For undated references, the latest edition of the referenced document (including any amendments)
applies.
EN 2083, Aerospace series — Copper or copper alloy conductors for electrical cables — Product standard
EN 2591 (series), Aerospace series — Elements of electrical and optical connection — Test methods
EN 3155-001, Aerospace series — Electrical contacts used in elements of connection — Part 001: Technical specification
EN 3155-002, Aerospace series — Electrical contacts used in elements of connection — Part 002: List and utilization of
contacts
EN 3155-008, Aerospace series — Electrical contacts used in elements of connection — Part 008: Contacts, electrical,
male, type A, crimp, class S — Product standard
EN 4008-009, Aerospace series — Elements of electrical and optical connection — Crimping tools and associated acces-
1)
sories — Part 009: Positioner for crimping tool M22520/23 — Product standard
EN 4008-010, Aerospace series — Elements of electrical and optical connection — Crimping tools and associated
1)
accessories — Part 010: Head for crimping tool M22520/23 — Product standard
ISO 8843, Aircraft — Crimp-removable contacts for electrical connectors — Identification system
MIL-DTL-22520, Crimping tools, terminal, hand or power actuated, wire termination, and tool kits, general specification
2
for
2)
MIL-C-22520/1, Crimping tools, terminal, hand, wire termination for wire barrel sizes 12 through 20
2)
MIL-C-22520/2, Crimping tools, terminal, hand, wire termination for wire barrel sizes 20 through 28
2)
MIL-C-22520/7, Crimping tools, terminal, hand, wire termination for wire barrel sizes 16, 20 and 22
MIL-C-22520/23, Crimping tools, terminal, hand or power actuated, wire termination: pneumatic tool for wire barrel
2)
sizes 0000 through 8
2)
MIL-C-39029, Contacts, electrical connector, general specification for
MIL-C-39029/56, Contacts, electrical connector, socket, crimp removable (for MIL-C-38999 series I, III and IV connec-
2)
tor)
MIL-C-39029/58, Contacts, electrical connector, pin, crimp removable (for MIL-C-24308, MIL-C-38999 series I, II, III and
2)
IV, and MIL-C-55302/69 and MIL-C-83733 connectors)
2)
MIL-I-81969, Installing and removal tools, connector electrical contact, general specification for
2)
MIL-I-81969/14, Installing and removal tools, connector elec
...