SIST EN 302 065-3 V2.1.1:2017

ETSI EN 302 065-3 V2.1.1 (2016-11)






HARMONISED EUROPEAN STANDARD
Short Range Devices (SRD) using
Ultra Wide Band technology (UWB);
Harmonised Standard covering the essential requirements
of article 3.2 of the Directive 2014/53/EU;
Part 3: Requirements for UWB devices
for ground based vehicular applications

---------------------- Page: 1 ----------------------
2 ETSI EN 302 065-3 V2.1.1 (2016-11)



Reference
REN/ERM-TGUWB-130
Keywords
harmonised standard, radio, regulation, SRD,
testing, UWB

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI EN 302 065-3 V2.1.1 (2016-11)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 8
3 Definitions, symbols and abbreviations . 9
3.1 Definitions . 9
3.2 Symbols . 9
3.3 Abbreviations . 9
4 Technical requirements specifications . 9
4.1 Environmental conditions . 9
4.2 General . 9
4.3 Transmitter Conformance Requirements . 11
4.3.1 Operating Bandwidth . 11
4.3.1.1 Applicability. 11
4.3.1.2 Description . 11
4.3.1.3 Limits . 11
4.3.1.4 Conformance . 11
4.3.2 Maximum Value of Mean Power Spectral Density . 11
4.3.2.1 Applicability. 11
4.3.2.2 Description . 11
4.3.2.3 Limits . 11
4.3.2.4 Conformance . 12
4.3.3 Maximum value of peak power . 12
4.3.3.1 Applicability. 12
4.3.3.2 Description . 12
4.3.3.3 Limits . 12
4.3.3.4 Conformance . 13
4.3.4 Exterior Limits . 13
4.3.4.1 Applicability. 13
4.3.4.2 Description . 13
4.3.4.3 Limits . 14
4.3.4.4 Conformance . 14
4.3.5 Total Power . 14
4.3.6 Other Emissions . 15
4.3.6.1 Applicability. 15
4.3.6.2 Description . 15
4.3.6.3 Limits . 15
4.3.6.4 Conformance . 15
4.3.7 Transmitter Unwanted Emissions . 15
4.4 Receiver Conformance Requirements . 15
4.4.1 General . 15
4.4.2 Receiver spurious emissions . 15
4.4.2.1 Applicability. 15
4.4.2.2 Description . 15
4.4.2.3 Limits . 16
4.4.2.4 Conformance . 16
4.4.3 Receiver interference handling . 16
4.4.3.1 Applicability. 16
4.4.3.2 Description . 16
4.4.3.3 Limits . 16
4.4.3.4 Conformance . 16
ETSI

---------------------- Page: 3 ----------------------
4 ETSI EN 302 065-3 V2.1.1 (2016-11)
4.5 Requirements for Spectrum Access . 17
4.5.1 Detect and Avoid (DAA) . 17
4.5.1.1 Applicability. 17
4.5.1.2 Description . 17
4.5.1.3 Limits . 17
4.5.1.4 Conformance . 17
4.5.2 Listen-Before-Talk (LBT) . 17
4.5.3 Low Duty Cycle (LDC) . 17
4.5.3.1 Applicability. 17
4.5.3.2 Description . 17
4.5.3.3 Limits . 17
4.5.3.4 Conformance . 18
4.6 Antenna Requirements . 18
4.7 Other Requirements and Mitigation techniques . 18
4.7.1 Adaptive / Transmit Power Control (TPC) . 18
4.7.1.1 Applicability. 18
4.7.1.2 Description . 19
4.7.1.3 Limits . 19
4.7.1.4 Conformance . 19
4.7.2 Activity factor . 19
4.7.3 Frequency Domain Mitigation . 19
4.7.4 Shielding effects . 19
4.7.5 Thermal Radiation . 19
4.7.6 Site registration . 19
5 Testing for compliance with technical requirements . 19
5.1 Environmental conditions for testing . 19
5.2 General conditions for testing . 19
5.2.1 Product information . 19
5.2.2 Requirements for the test modulation . 20
5.2.3 Test conditions, power supply and ambient temperatures . 20
5.2.4 Choice of equipment for test suites . 20
5.2.5 Multiple Operating bandwidths and multiband equipment . 20
5.2.6 Testing of host connected equipment and plug-in radio devices . 20
5.3 Interpretation of the measurement results . 20
5.3.0 General . 20
5.3.1 Measurement uncertainty is equal to or less than maximum acceptable uncertainty . 20
5.3.2 Measurement uncertainty is greater than maximum acceptable uncertainty . 20
5.4 Emissions . 20
6 Conformance test suites. 21
6.1 Introduction . 21
6.2 Initial Measurement steps . 21
6.3 Radiated measurements . 21
6.3.1 General . 21
6.3.2 Test sites and general arrangements for measurements involving the use of radiated fields . 21
6.3.3 Guidance on the use of a radiation test site . 21
6.3.3.1 General . 21
6.3.3.2 Range length. . 21
6.3.4 Coupling of signals . 21
6.3.5 Standard test methods . 21
6.3.5.1 Generic measurement method . 21
6.3.5.1.1 Calibrated setup . 21
6.3.5.1.2 Substitution method . 21
6.3.6 Standard calibration method . 21
6.4 Conducted measurements . 22
6.5 Conformance methods of measurement for transmitter . 22
6.5.1 General . 22
6.5.2 Method of measurements of the Ultra Wideband Emissions . 22
6.5.3 Operating Bandwidth . 24
6.5.4 Mean power spectral density measurements . 25
6.5.5 Peak power measurements . 25
ETSI

---------------------- Page: 4 ----------------------
5 ETSI EN 302 065-3 V2.1.1 (2016-11)
6.5.6 Exterior limit measurement. 25
6.5.7 Total Power . 25
6.5.8 Transmitter unwanted emissions . 25
6.6 Conformance methods of measurement for receiver . 25
6.6.1 Receiver spurious emissions . 25
6.6.2 Receiver interference handling. . 25
6.7 Conformance test suites for spectrum access . 25
6.7.1 Detect and Avoid (DAA) . 25
6.7.2 Listen Before Talk . 26
6.7.3 Low Duty Cycle . 26
6.8 Conformance test suites for antenna requirements . 26
6.9 Other Test Suites . 26
6.9.1 Transmit Power Control . 26
6.9.2 Activity Factor . 26
6.9.3 Frequency Domain Mitigation . 26
6.9.4 Shielding Effects . 26
6.9.5 Thermal Radiations . 26
6.9.6 Installation requirements / site registration . 26
Annex A (normative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 27
Annex B (informative): Application form for testing . 29
B.1 Introduction . 29
B.2 General Information by ETSI EN 302 065-3, clause 5.2.1 . 29
B.2.1 Type of Equipment (stand-alone, combined, plug-in radio device, etc.) . 29
B.2.2 The nominal voltages of the stand-alone radio equipment or the nominal voltages of the combined
(host) equipment or test jig in case of plug-in devices . 29
B.3 Signal related Information by ETSI EN 302 065-3, clause 4.3 . 30
B.3.1 Introduction . 30
B.3.2 Operating bandwidth(s) of the equipment . 30
B.3.3 The worst case mode for each of the following tests . 30
B.4 RX test Information by ETSI EN 302 065-3, clause 4.4 . 30
B.4.1 Introduction . 30
B.4.2 Performance criterion and level of performance . 30
B 4.3 Interfering signals . 31
B.5 Information on mitigation techniques by ETSI EN 302 065-3, clauses 4.5 and 4.7 . 31
B.5.1 Introduction . 31
B.5.2 mitigation techniques . 31
B.6 Additional information provided by the applicant . 32
B.6.1 About the DUT . 32
B.6.2 Additional items and/or supporting equipment provided . 32
Annex C (normative): Equivalent mitigation techniques . 33
C.1 Equivalent mitigation techniques and LDC limits . 33
C.2 Test Procedure . 33
C.3 Limit . 33
Annex D (informative): Surface mounted devices example mirror . 34
Annex E (normative): Device mounted inside the tyre . 36
Annex F (informative): Bibliography . 38
Annex F (informative): Change history . 39
History . 40

ETSI

---------------------- Page: 5 ----------------------
6 ETSI EN 302 065-3 V2.1.1 (2016-11)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.13] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the
...

Draft ETSI EN 302 065-3 V2.1.0 (2016-04)






HARMONISED EUROPEAN STANDARD
Short Range Devices (SRD) using
Ultra Wide Band technology (UWB);
Harmonised Standard covering the essential requirements
of article 3.2 of the Directive 2014/53/EU;
Part 3: Requirements for UWB devices
for ground based vehicular applications

---------------------- Page: 1 ----------------------
2 Draft ETSI EN 302 065-3 V2.1.0 (2016-04)



Reference
REN/ERM-TGUWB-130
Keywords
harmonised standard, radio, regulation, SRD,
testing, UWB

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Draft ETSI EN 302 065-3 V2.1.0 (2016-04)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 6
1 Scope . 7
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 8
3 Definitions, symbols and abbreviations . 9
3.1 Definitions . 9
3.2 Symbols . 9
3.3 Abbreviations . 9
4 Technical requirements specifications . 10
4.1 Environmental conditions . 10
4.2 General . 10
4.3 Transmitter Conformance Requirements . 11
4.3.1 Operating Bandwidth . 11
4.3.1.1 Applicability. 11
4.3.1.2 Description . 11
4.3.1.3 Limits . 11
4.3.1.4 Conformance . 11
4.3.2 Maximum Value of Mean Power Spectral Density . 12
4.3.2.1 Applicability. 12
4.3.2.2 Description . 12
4.3.2.3 Limits . 12
4.3.2.4 Conformance . 12
4.3.3 Maximum value of peak power . 12
4.3.3.1 Applicability. 12
4.3.3.2 Description . 12
4.3.3.3 Limits . 13
4.3.3.4 Conformance . 13
4.3.4 Exterior Limits . 13
4.3.4.1 Applicability. 13
4.3.4.2 Description . 13
4.3.4.3 Limits . 14
4.3.4.4 Conformance . 14
4.3.5 Total Power . 14
4.3.6 Other Emissions . 15
4.3.6.1 Applicability. 15
4.3.6.2 Description . 15
4.3.6.3 Limits . 15
4.3.6.4 Conformance . 15
4.3.7 Transmitter Unwanted Emissions . 15
4.4 Receiver Conformance Requirements . 15
4.4.1 Receiver Requirements . 15
4.4.2 Receiver spurious emissions . 15
4.4.2.1 Applicability. 15
4.4.2.2 Description . 15
4.4.2.3 Limits . 15
4.4.2.4 Conformance . 16
4.4.3 Receiver interference handling . 16
4.4.3.1 Applicability. 16
4.4.3.2 Description . 16
4.4.3.3 Limits . 16
4.4.3.4 Conformance . 16
4.5 Requirements for Spectrum Access . 17
ETSI

---------------------- Page: 3 ----------------------
4 Draft ETSI EN 302 065-3 V2.1.0 (2016-04)
4.5.1 Detect and Avoid (DAA) . 17
4.5.1.1 Applicability. 17
4.5.1.2 Description . 17
4.5.1.3 Limits . 17
4.5.1.4 Conformance . 17
4.5.2 Listen-Before-Talk (LBT) . 17
4.5.3 Low Duty Cycle (LDC) . 17
4.5.3.1 Applicability. 17
4.5.3.2 Description . 17
4.5.3.3 Limits . 17
4.5.3.4 Conformance . 18
4.6 Antenna Requirements . 18
4.7 Other Requirements and Mitigation techniques . 18
4.7.1 Adaptive / Transmit Power Control (TPC) . 18
4.7.1.1 Applicability. 18
4.7.1.2 Description . 18
4.7.1.3 Limits . 18
4.7.1.4 Conformance . 18
4.7.2 Activity factor . 19
4.7.3 Frequency Domain Mitigation . 19
4.7.4 Shielding effects . 19
4.7.5 Thermal Radiation . 19
4.7.6 Site registration . 19
5 Testing for compliance with technical requirements . 19
5.1 Environmental conditions for testing . 19
5.2 General conditions for testing . 19
5.2.1 Product information . 19
5.2.2 Requirements for the test modulation . 19
5.2.3 Test conditions, power supply and ambient temperatures . 19
5.2.4 Choice of equipment for test suites . 19
5.2.5 Multiple Operating bandwidths and multiband equipment . 19
5.2.6 Testing of host connected equipment and plug-in radio devices . 20
5.3 Interpretation of the measurement results . 20
5.3.0 General . 20
5.3.1 Measurement uncertainty is equal to or less than maximum acceptable uncertainty . 20
5.3.2 Measurement uncertainty is greater than maximum acceptable uncertainty . 20
5.4 Emissions . 20
6 Conformance test suites. 20
6.1 Introduction . 20
6.2 Initial Measurement steps . 20
6.3 Radiated measurements . 20
6.3.1 General . 20
6.3.2 Test sites and general arrangements for measurements involving the use of radiated fields . 20
6.3.3 Guidance on the use of a radiation test site . 20
6.3.3.1 General . 20
6.3.3.2 Range length. . 20
6.3.4 Coupling of signals . 21
6.3.5 Standard test methods . 21
6.3.5.1 Generic measurement method . 21
6.3.5.1.1 Calibrated setup . 21
6.3.5.1.2 Substitution method . 21
6.3.6 Standard calibration method . 21
6.4 Conducted measurements . 21
6.5 Conformance methods of measurement for transmitter . 21
6.5.1 General . 21
6.5.2 Method of measurements of the Ultra Wideband Emissions . 21
6.5.3 Operating Bandwidth . 23
6.5.4 Mean power spectral density measurements . 23
6.5.5 Peak power measurements . 24
6.5.6 Exterior limit measurement. 24
ETSI

---------------------- Page: 4 ----------------------
5 Draft ETSI EN 302 065-3 V2.1.0 (2016-04)
6.5.7 Total Power . 24
6.5.8 Transmitter unwanted emissions . 24
6.6 Conformance methods of measurement for receiver . 24
6.6.1 Receiver spurious emissions . 24
6.6.2 Receiver interference handling. . 24
6.7 Conformance test suites for spectrum access . 24
6.7.1 Detect and Avoid (DAA) . 24
6.7.2 Listen Before Talk . 24
6.7.3 Low Duty Cycle . 24
6.8 Conformance test suites for antenna requirements . 25
6.9 Other Test Suites . 25
6.9.1 Transmit Power Control . 25
6.9.2 Activity Factor . 25
6.9.3 Frequency Domain Mitigation . 25
6.9.4 Shielding Effects . 25
6.9.5 Thermal Radiations . 25
6.9.6 Installation requirements / site registration . 25
Annex A (normative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 26
Annex B (informative): Application form for testing . 28
B.1 Introduction . 28
B.2 General Information by ETSI EN 302 065-3, clause 5.2.1 . 28
B.2.1 Type of Equipment (stand-alone, combined, plug-in radio device, etc.) . 28
B.2.2 The nominal voltages of the stand-alone radio equipment or the nominal voltages of the combined
(host) equipment or test jig in case of plug-in devices . 28
B.3 Signal related Information by ETSI EN 302 065-3, clause 4.3 . 29
B.3.1 Introduction . 29
B.3.2 Operating bandwidth(s) of the equipment . 29
B.3.3 The worst case mode for each of the following tests . 29
B.4 RX test Information by ETSI EN 302 065-3, clause 4.4 . 29
B.4.1 Introduction . 29
B.4.2 Performance criterion and level of performance . 29
B 4.3 Interfering signals . 29
B.5 Information on mitigation techniques by ETSI EN 302 065-3, clauses 4.5 and 4.7 . 30
B.5.1 Introduction . 30
B.5.2 mitigation techniques . 30
B.6 Additional information provided by the applicant . 30
B.6.1 About the DUT . 30
B.6.2 Additional items and/or supporting equipment provided . 30
Annex C (normative): Equivalent mitigation techniques . 32
C.1 Equivalent mitigation techniques and LDC limits . 32
C.2 Test Procedure . 32
C.3 Limit . 32
Annex D (informative): Surface mounted devices example mirror . 33
Annex E (normative): Device mounted inside the tyre . 35
Annex F (informative): Bibliography . 37
History . 38

ETSI

---------------------- Page: 5 ----------------------
6 Draft ETSI EN 302 065-3 V2.1.0 (2016-04)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM) and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.13] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the E
...