SIST EN 13827:2004
(Main)Steel cord conveyor belts - Determination of the lateral and vertical displacement of steel cords
Steel cord conveyor belts - Determination of the lateral and vertical displacement of steel cords
This European Standard specifies methods for the determination of the mean lateral displacement between cords, and for the determination of the vertical displacement of cords relative to a mean level of steel cords within a conveyor belt as described in prEN ISO 15236-1.
Stahlseil-Fördergurte - Prüfung der horizontalen und vertikalen Lage der Stahlseile
Diese Europäische Norm legt Verfahren fest zur Bestimmung der mittleren seitlichen Verschiebung zwischen den Seilen und zur Bestimmung der senkrechten Verschiebung der Seile bezogen auf eine mittlere Höhe der Stahlseile in einem Fördergurt, wie er in prEN ISO 15236-1 beschrieben ist.
Courroies transporteuses a carcasse métallique - Détermination du déplacement latéral et vertical des câbles d'acier
La présente Norme européenne décrit les méthodes de détermination du déplacement moyen latéral entre les câbles et de détermination du déplacement vertical des câbles par rapport à un niveau moyen de disposition des câbles d'acier dans une courroie transporteuse comme décrit dans le prEN ISO 15236-1.
Trakovi tračnih transporterjev z jeklenim vložkom – Preverjanje vodoravnega in navpičnega položaja jeklenega vložka
General Information
- Status
- Published
- Publication Date
- 31-May-2004
- Technical Committee
- DTN - Lift and transport appliances
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Jun-2004
- Due Date
- 01-Jun-2004
- Completion Date
- 01-Jun-2004
Relations
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Overview
SIST EN 13827:2004 - Steel cord conveyor belts - Determination of the lateral and vertical displacement of steel cords defines standardized test methods for measuring the alignment of steel cords within conveyor belts. Proper cord positioning ensures optimal belt performance, minimizes wear, and extends service life in demanding industrial settings. Developed by SIST in accordance with European Committee for Standardization (CEN) guidelines, this standard aligns closely with prEN ISO 15236-1, supporting consistent quality in steel cord conveyor belts.
Key Topics
- Lateral Displacement Measurement: Details procedures for evaluating the sideways or horizontal shift between adjacent steel cords within the belt. This ensures uniform load distribution and maintains belt structural integrity.
- Vertical Displacement Measurement: Specifies methods for measuring the variation in height of steel cords relative to a mean level. Accurate vertical alignment is essential for belt flexibility and fatigue resistance.
- Test Equipment: Recommends precision instruments such as graduated measuring tapes, dial gauge micrometers, and optical magnifiers with required accuracy.
- Sample Preparation: Describes requirements for test pieces, including dimensions, edge preparation, and cord exposure, to guarantee reliable measurement results.
- Reporting Requirements: Outlines the information to be included in test reports, such as identification data, measurement results, deviations, and compliance references.
Applications
SIST EN 13827:2004 is valuable across several industrial sectors where conveyor belts with steel cord carcasses are utilized. Typical applications include:
- Mining & Quarrying: Reliable cord alignment supports heavy material transport and reduces downtime due to belt failure.
- Bulk Material Handling: In ports, terminals, and processing facilities, accurate cord positioning ensures belt strength for moving coal, ores, or aggregates.
- Heavy Manufacturing: Steel plants, cement works, and construction material producers benefit from the standard’s verification of conveyor belt reliability.
- Quality Control & Procurement: Manufacturers and buyers apply the standard for product evaluation, compliance documentation, and process optimization.
- Maintenance & Inspection: On-site technicians and engineers use the test methods to diagnose performance issues and plan preventive maintenance.
Ensuring conformity with SIST EN 13827:2004 helps organizations mitigate the risk of premature belt wear, operational failures, and associated costs.
Related Standards
For holistic quality assurance and safety in conveyor belt systems, consider these closely associated standards:
- prEN ISO 15236-1: Steel cord conveyor belts - Design, dimensions, and mechanical requirements for general use.
- EN 13827:2003: The original European reference for lateral and vertical displacement testing.
- ISO 15236 Series: Global standards covering steel cord belt characteristics and testing.
- EN ISO 14890: Conveyor belts - Specification for rubber or plastics covered belts.
- EN ISO 9856: Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus.
Adhering to SIST EN 13827:2004 and related standards ensures reliable, high-performance steel cord conveyor belts that meet stringent European industrial requirements.
Keywords: steel cord conveyor belts, SIST EN 13827:2004, lateral displacement, vertical displacement, cord alignment, conveyor belt testing, industrial standard, quality control, belt integrity, industrial safety, CEN, prEN ISO 15236-1
Frequently Asked Questions
SIST EN 13827:2004 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Steel cord conveyor belts - Determination of the lateral and vertical displacement of steel cords". This standard covers: This European Standard specifies methods for the determination of the mean lateral displacement between cords, and for the determination of the vertical displacement of cords relative to a mean level of steel cords within a conveyor belt as described in prEN ISO 15236-1.
This European Standard specifies methods for the determination of the mean lateral displacement between cords, and for the determination of the vertical displacement of cords relative to a mean level of steel cords within a conveyor belt as described in prEN ISO 15236-1.
SIST EN 13827:2004 is classified under the following ICS (International Classification for Standards) categories: 53.040.20 - Components for conveyors. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 13827:2004 has the following relationships with other standards: It is inter standard links to SIST EN ISO 15236-1:2017, SIST EN ISO 15236-3:2017, SIST EN ISO 15236-3:2008. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 13827:2004 is associated with the following European legislation: Standardization Mandates: M/BC/CEN/88/13. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 13827:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahlseil-Fördergurte - Prüfung der horizontalen und vertikalen Lage der StahlseileCourroies transporteuses a carcasse métallique - Détermination du déplacement latéral et vertical des câbles d'acierSteel cord conveyor belts - Determination of the lateral and vertical displacement of steel cords53.040.20Deli za transporterjeComponents for conveyorsICS:Ta slovenski standard je istoveten z:EN 13827:2003SIST EN 13827:2004en01-junij-2004SIST EN 13827:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13827December 2003ICS 53.040.20English versionSteel cord conveyor belts - Determination of the lateral andvertical displacement of steel cordsCourroies transporteuses à carcasse métallique -Détermination du déplacement latéral et vertical des câblesd'acierStahlseil-Fördergurte - Prüfung der horizontalen undvertikalen Lage der StahlseileThis European Standard was approved by CEN on 3 November 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13827:2003: ESIST EN 13827:2004
displacement of cords relative to a mean level.65Test report.8Bibliography.9SIST EN 13827:2004
...