SIST EN 71-3:2019+A1:2021/oprA2:2024
(Amendment)Safety of toys - Part 3: Migration of certain elements
Safety of toys - Part 3: Migration of certain elements
This document specifies requirements and test methods for the migration of aluminium, antimony, arsenic, barium, boron, cadmium, Chromium (III), Chromium (VI), cobalt, copper, lead, manganese, mercury, nickel, selenium, strontium, tin, organic tin and zinc from toy materials and from parts of toys.
Packaging materials are not considered to be part of the toy unless they have intended play value.
NOTE 1 See the European Commission guidance document no. 12 on the application of the Directive on the safety of toys - packaging [2].
The standard contains requirements for the migration of certain elements from the following categories of toy materials:
- Category I: Dry, brittle, powder like or pliable materials;
- Category II: Liquid or sticky materials;
- Category III: Scraped-off materials.
The requirements of this document do not apply to toys or parts of toys which, due to their accessibility, function, volume or mass, clearly exclude any hazard due to sucking, licking or swallowing or prolonged skin contact when the toy or part of toy is used as intended or in a foreseeable way, bearing in mind the behaviour of children.
NOTE 2 For the purposes of this document, for the following toys and parts of toys the likelihood of sucking, licking or swallowing toys is considered significant (see H.2 and H.3):
- All toys intended to be put in the mouth or to the mouth, cosmetics toys and writing instruments categorized as toys can be considered to be sucked, licked or swallowed;
- All the accessible parts and components of toys intended for children up to 6 years of age can be considered to come into contact with the mouth. The likelihood of mouth contact with parts of toys intended for older children is not considered significant in most cases (see H.2).
Sicherheit von Spielzeug - Teil 3: Migration bestimmter Elemente
Sécurité des jouets - Partie 3 : Migration de certains éléments
Varnost igrač - 3. del: Migracija določenih elementov - Dopolnilo A2
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 71-3:2019+A1:2021/oprA2:2024
01-maj-2024
Varnost igrač - 3. del: Migracija določenih elementov - Dopolnilo A2
Safety of toys - Part 3: Migration of certain elements
Sicherheit von Spielzeug - Teil 3: Migration bestimmter Elemente
Sécurité des jouets - Partie 3 : Migration de certains éléments
Ta slovenski standard je istoveten z: EN 71-3:2019+A1:2021/prA2
ICS:
97.200.50 Igrače Toys
SIST EN 71-3:2019+A1:2021/oprA2:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 71-3:2019+A1:2021/oprA2:2024
---------------------- Page: 2 ----------------------
SIST EN 71-3:2019+A1:2021/oprA2:2024
DRAFT
EUROPEAN STANDARD
EN 71-3:2019+A1:2021
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA2
March 2024
ICS 97.200.50
English Version
Safety of toys - Part 3: Migration of certain elements
Sécurité des jouets - Partie 3 : Migration de certains Sicherheit von Spielzeug - Teil 3: Migration bestimmter
éléments Elemente
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 52.
This draft amendment A2, if approved, will modify the European Standard EN 71-3:2019+A1:2021. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 71-3:2019+A1:2021/prA2:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 71-3:2019+A1:2021/oprA2:2024
EN 71-3:2019+A1:2021/prA2:2024 (E)
Contents Page
European foreword . 3
1 Modifications to the European foreword . 4
2 Modifications of wording in whole document . 4
3 Modifications to Clause 4 "Requirements" . 4
4 Modifications to Clause 7 "Sampling and sample preparation" . 4
5 Modifications to Clause 8 "Migration methodology" . 5
6 Modifications to Clause 12 "Test report" . 5
7 Modifications to Annex A "Significant technical changes between this document and the
previous version" . 5
8 Modifications to Annex B "Information on method validation" . 5
9 Modifications to Annex F "Method of analysis for Chromium (VI)" . 6
10 Modifications to Annex G "Method of analysis for organic tin (see H.9)" . 6
11 Modifications to Annex H "Rationale" . 6
12 Modifications to Annex ZA "Relationship between this European Standard and the
essential requirements of EU Directive 2009/48/EC aimed to be covered"
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.