SIST EN 62087-1:2016

SLOVENSKI STANDARD
SIST EN 62087-1:2016
01-julij-2016
1DGRPHãþD
SIST EN 62087:2012
$YGLRYLGHRLQSULSDGDMRþDRSUHPD8JRWDYOMDQMHSRUDEHHQHUJLMHGHO
6SORãQR,(&
Audio, video, and related equipment - Determination of power consumption -- Part 1:
General (IEC 62087-1:2015)
Messverfahren für die Leistungsaufnahme von Audio-, Video- und verwandten Geräten -
Teil 1: Allgemeines (IEC 62087-1:2015)
Appareils audio, vidéo et matériel connexe - Détermination de la consommation de
puissance - Partie 1: Généralités (IEC 62087-1:2015)
Ta slovenski standard je istoveten z: EN 62087-1:2016
ICS:
33.160.01 Avdio, video in avdiovizualni Audio, video and audiovisual
sistemi na splošno systems in general
SIST EN 62087-1:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62087-1:2016

---------------------- Page: 2 ----------------------

SIST EN 62087-1:2016


EUROPEAN STANDARD EN 62087-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2016
ICS 33.160.10 Supersedes EN 62087:2012 (partially)
English Version
Audio, video, and related equipment - Determination of power
consumption - Part 1: General
(IEC 62087-1:2015)
Appareils audio, vidéo et matériel connexe - Détermination Messverfahren für die Leistungsaufnahme von Audio-,
de la consommation de puissance - Partie 1: Généralités Video- und verwandten Geräten - Teil 1: Allgemeines
(IEC 62087-1:2015) (IEC 62087-1:2015)
This European Standard was approved by CENELEC on 2015-07-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62087-1:2016 E

---------------------- Page: 3 ----------------------

SIST EN 62087-1:2016
EN 62087-1:2016
European foreword
The text of document 100/2466/FDIS, future edition 1 of IEC 62087-1, prepared by Technical Area 12
“AV energy efficiency and smart grid applications” of IEC/TC 100 “Audio, video and multimedia
systems and equipment” was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 62087-1:2016.

The following dates are fixed:
• latest date by which the document has to be (dop) 2016-08-19
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2019-02-19
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes EN 62087:2012 (partially).

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 62087-1:2015 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 62087 Series NOTE Harmonized as EN 62087 Series.
IEC 62087-2 NOTE Harmonized as EN 62087-2.
IEC 62087-3 NOTE Harmonized as EN 62087-3.
IEC 62087-4 NOTE Harmonized as EN 62087-4.
IEC 62087-5 NOTE Harmonized as EN 62087-5.
IEC 62087-6 NOTE Harmonized as EN 62087-6.
2

---------------------- Page: 4 ----------------------

SIST EN 62087-1:2016
EN 62087-1:2016
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu

Publication Year Title EN/HD Year

IEC 62301 (mod) 2011 Household electrical appliances - EN 50564 2011
Measurement of standby power
IEC 62542 2013 Environmental standardization EN 62542 2013
for electrical and electronic products
and systems - Glossary of terms

3

---------------------- Page: 5 ----------------------

SIST EN 62087-1:2016

---------------------- Page: 6 ----------------------

SIST EN 62087-1:2016




IEC 62087-1

®


Edition 1.0 2015-06




INTERNATIONAL



STANDARD









colour

inside










Audio, video, and related equipment – Determination of power consumption –

Part 1: General



























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 33.160.10 ISBN 978-2-8322-2681-0



  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------

SIST EN 62087-1:2016
– 2 – IEC 62087-1:2015 © IEC 2015
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, and abbreviations . 6
3.1 Terms and definitions . 6
3.2 Abbreviations . 7
4 Specification of operating modes and functions . 7
5 General method . 8
5.1 General conditions . 8
5.1.1 Power source . 8
5.1.2 Environmental conditions . 9
5.1.3 Adjustment of controls . 10
5.1.4 Input signals . 10
5.1.5 Power measuring instrument . 10
5.1.6 Measurement uncertainty. 10
5.1.7 Luminance measuring device . 10
5.1.8 Illuminance measuring instrument . 11
5.2 General measuring procedure . 11
6 Determination of power consumption, Off mode . 11
7 Verification procedure . 11
Annex A (informative) Verification procedure . 12
A.1 General . 12
A.2 Verification procedure . 12
Annex B (informative) Electricity supplies . 13
Bibliography . 14

Figure A.1 – Flowchart, verification procedure . 12

Table 1 – General operating modes and functions . 8
Table B.1 – Typical declared electricity supplies for some regions . 13

---------------------- Page: 8 ----------------------

SIST EN 62087-1:2016
IEC 62087-1:2015 © IEC 2015 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

AUDIO, VIDEO, AND RELATED EQUIPMENT –
DETERMINATION OF POWER CONSUMPTION –

Part 1: General

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62087-1 has been prepared by technical area 12: AV energy
efficiency and smart grid applications, of IEC technical committee 100: Audio, video and
multimedia systems and equipment.
This first edition of IEC 62087-1 together with IEC 62087-2 to IEC 62087-6 cancels and
replaces IEC 62087:2011 in its entirety. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to Clauses 1 to 5
of IEC 62087:2011.
– It includes new information about operation modes.
– Equipment that includes removable main batteries are now considered.
– Light measuring equipment is now specified.

---------------------- Page: 9 ----------------------

SIST EN 62087-1:2016
– 4 – IEC 62087-1:2015 © IEC 2015
The text of this standard is based on the following documents:
FDIS Report on voting
100/2466/FDIS 100/2496/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
A list of all parts in the IEC 62087 series, published under the general title Audio, video, and
related equipment – Determination of power consumption, can be found on the IEC website.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
 reconfirmed,
 withdrawn,
 replaced by a revised edition, or
 amended.

A bilingual version of this publication may be issued at a later date.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.

---------------------- Page: 10 ----------------------

SIST EN 62087-1:2016
IEC 62087-1:2015 © IEC 2015 – 5 –
INTRODUCTION
The IEC 62087 series specifies the general conditions and procedure for determining the
power consumption of audio, video and related equipment. The specific conditions and
procedures for specific types of equipment are specified in IEC 62087-3 to IEC 62087-6.
IEC 62087-2 specifies signals and media that may be required to determine the power
consumption of some types of equipment.
1
IEC 62087:2008 added methods for determining the On (average) mode power consumption
of televisions, based on three video signal sets. These include static, dynamic broadcast-
content, and Internet-content signals.
2
IEC 62087:2011 revised methods for determining the power consumption of set top boxes.
The IEC 62087 series separates IEC 62087 into parts, including this general part which
specifies the common conditions and procedures and adds new information about operating
modes.
IEC 62087 has been subdivided and currently consists of the following planned or published
parts:
– Part 1: General
– Part 2: Signals and media
– Part 3: Television sets
– Part 4: Video recording equipment
– Part 5: Set top boxes
– Part 6: Audio equipment
___________
1
IEC 62087:2008, Methods of measurement for the power consumption of audio, video and related equipment
2
IEC 62087:2011, Methods of measurement for the power consumption of audio, video and related equipment

---------------------- Page: 11 ----------------------

SIST EN 62087-1:2016
– 6 – IEC 62087-1:2015 © IEC 2015
AUDIO, VIDEO, AND RELATED EQUIPMENT –
DETERMINATION OF POWER CONSUMPTION –

Part 1: General



1 Scope
This part of IEC 62087
...