SIST ETS 300 705-2:2000

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Network (ISDN); DECT/ISDN interworking for end system configuration; Profile Implementation Conformance Statement (ICS); Part 2: Fixed radio Termination (FT)33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:ETS 300 705-2 E13SIST ETS 300 705-2:en01-QRYHPEHU-3SIST ETS 300 705-2:SLOVENSKI
STANDARD



SIST ETS 300 705-2:2000



EUROPEANETS 300 705-2TELECOMMUNICATIONJune 1997STANDARDSource: ETSI EP-DECTReference: DE/DECT-040045-2ICS:33.020Key words:DECT, ISDN, ICS, radio, testingDigital Enhanced Cordless Telecommunications (DECT);Integrated Services Digital Network (ISDN);DECT/ISDN interworking for end system configuration;Profile Implementation Conformance Statement (ICS);Part 2: Fixed radio Termination (FT)ETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.frTel.: +33 4 92 94 42 00 - Fax: +33 4 93 65 47 16Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1997. All rights reserved.SIST ETS 300 705-2:2000



Page 2ETS 300 705-2: June 1997Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title page.SIST ETS 300 705-2:2000



Page 3ETS 300 705-2: June 1997ContentsForeword.71Scope.92Normative references.93Definitions and abbreviations.113.1Definitions.113.2Abbreviations.114Conformance requirement concerning Profile ICS.11Annex A (normative):System Conformance Statement (SCS) proforma for DECT FT IAP.14A.1Identification.14A.1.1Description of the system.14A.1.2Supplier of the system.14A.1.3Client identification.15A.1.4Contact person identification.15A.1.5Signature of the client or of the supplier.15A.2Protocol identification.16A.3Profile identification.16A.4Combination description table.16A.5Configurability table.16A.6Additional information.17Annex B (normative):Requirement lists for DECT FT IAP.18B.1General.18B.1.1Profile Requirement List (Profile RL).18B.1.2General conditions.19B.2Requirement lists on DECT protocols.19B.2.1Requirement list on DECT NWK layer.19B.2.1.1Network entities.19B.2.1.2Network features.19B.2.1.2.1CC features.19B.2.1.2.2SS features (services).20B.2.1.2.3LCE features.22B.2.1.3Procedures.22B.2.1.4Messages.24B.2.1.4.1CC messages.24B.2.1.4.2CRSS and CISS messages.25B.2.1.4.3LCE messages.25B.2.2Requirement list on DECT DLC layer.26B.2.2.1Services.26B.2.2.1.1C-plane services.26B.2.2.1.2U-plane services.26B.2.2.2Procedures.26SIST ETS 300 705-2:2000



Page 4ETS 300 705-2: June 1997B.2.2.2.1Generic signalling procedures.26B.2.2.2.2Class A procedures.27B.2.2.2.3Broadcast procedures.27B.2.2.2.4LU1 procedures.27B.2.2.3Parameters.27B.2.2.3.1LU1 parameters.27B.2.2.4Messages.28B.2.2.4.1C-plane PDUs.28B.2.3Requirement list on DECT MAC layer.28B.2.3.1Services.28B.2.3.1.1Connection oriented control services.28B.2.3.1.2Broadcast control services.29B.2.3.1.3Multiplexing services.29B.2.3.2Procedures.31B.2.3.2.1Connection setup procedures.31B.2.3.2.2Connection data transfer procedures.31B.2.3.2.3Connection release procedures.31B.2.3.2.4Broadcast procedures.31B.2.3.2.5CSF multiplexing procedures.32B.2.3.2.6Layer management procedures.32B.2.3.3Other capabilities.32B.2.3.4Messages.33B.2.3.4.1A-field header - B-field identification.33B.2.3.4.2Paging tail messages supported.33B.2.3.4.3MAC control messages supported.34B.2.3.4.4B-field messages supported.34B.2.3.5MAC messages format and field value.36B.2.3.5.1QT - Fixed part capability.36B.2.4Requirement list on DECT PHL layer.36B.2.5Requirement list on ISDN L3 layer tables.37B.2.5.1ISDN L3 layer primary access tables.37B.2.5.2ISDN L3 layer basic access tables.37B.2.6Requirement list on ISDN L2 layer tables.37B.2.6.1ISDN L2 layer primary access tables.37B.2.6.2ISDN L2 layer basic access tables.37B.2.7Requirement list on ISDN L1 layer tables.37B.2.7.1ISDN L1 layer primary access tables.37B.2.7.2ISDN L1 layer basic access tables.37Annex C (normative):Profile specific ICS proforma for DECT FT IAP.38C.1Guidance for completing the profile specific proforma.38C.1.1Purposes and structure.38C.1.2Instructions for completing the Profile specific ICS.40C.2Identification of the implementation.40C.2.1Date of statement.40C.2.2Identification of the implementation.40C.2.3Contact person identification.40C.2.4Relationship with the System Conformance Statement (SCS).41C.3Identification of the profile.41C.3.1Defect report numbers and amendments implemented.41C.3.2Addenda implemented.42C.4Profile ICS proforma tables.42C.4.1Global statement of conformance.42C.4.2Profile ICS features tables.42C.4.3Profile ICS IWU tables.43C.4.3.1IWU procedures.43SIST ETS 300 705-2:2000



Page 5ETS 300 705-2: June 1997C.4.3.2IWU messages mapping.45C.4.4Profile ICS NWK layer tables.53C.4.5Profile ICS DLC layer tables.53C.4.6Profile ICS MAC layer tables.53Annex D (normative):Messages redefinition for DECT CI FT PICS proforma.54D.1Description.54D.2CC messages.54D.3Connection Related Supplementary Service (CRSS) and Connection Independent SupplementaryService (CISS) messages.62D.4Information elements.66D.5Timers and constants support.69History.70SIST ETS 300 705-2:2000



Page 6ETS 300 705-2: June 1997Blank pageSIST ETS 300 705-2:2000



Page 7ETS 300 705-2: June 1997ForewordThis European Telecommunication Standard (ETS) has been produced by the Digital Enhanced CordlessTelecommunications (DECT) Project of the European Telecommunications Standards Institute (ETSI).This ETS comprises two parts:Part 1:"Portable radio Termination (PT)".Part 2:"Fixed radio Termination (FT)".Annex A of this ETS contains the System Conformance Statement (SCS) proforma for the DECT FT ISDNAccess Profile (IAP).Annex B of this ETS contains the requirement lists for the DECT FT IAP.Annex C of this ETS contains the specific ICS proforma for the DECT FT IAP.Transposition datesDate of adoption:6 June 1997Date of latest announcement of this ETS (doa):30 September 1997Date of latest publication of new National Standardor endorsement of this ETS (dop/e):31 March 1998Date of withdrawal of any conflicting National Standard (dow):31 March 1998SIST ETS 300 705-2:2000



Page 8ETS 300 705-2: June 1997Blank pageSIST ETS 300 705-2:2000



Page 9ETS 300 705-2: June 19971ScopeThis European Telecommunication Standard (ETS) provides the Profile Implementation ConformanceStatement (Profile ICS) proforma for the Digital Enhanced Cordless Telecommunications DECT/ISDN inter-working for end system configuration Profile at the Fixed Termination as defined in ETS 300 434-1 [10],and ETS 300 434-2 [11] in compliance with the relevant requirements and in accordance with the relevantguidance given in ISO/IEC 9646-7 [18].The supplier of an implementation which is claimed to conform to ETS 300 434-1 [10] andETS 300 434-2 [11] is required to complete a copy of the PICS proforma ETS 300 476 parts 4, 5, 6 and7 [12], [13], [14] and [15], with the replacements provided by the requirement lists given in annex B of thisETS, as well as a copy of the specific ICS proforma provided in the annex C of this ETS.2Normative referencesThis ETS incorporates, by dated or undated reference, provisions from other publications. These normativereferences are cited at the appropriate places in the text and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this ETSonly when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies.[1]ETS 300 175-1: "Digital Enhanced Cordless Telecommunications (DECT);Common Interface (CI); Part 1: Overview".[2]ETS 300 175-2: "Digital Enhanced Cordless Telecommunications (DECT);Common Interface (CI); Part 2: Physical layer (PHL)".[3]ETS 300 175-3: "Digital Enhanced Cordless Telecommunications (DECT);Common Interface (CI); Part 3: Medium Access Control (MAC) layer".[4]ETS 300 175-4: "Digital Enhanced Cordless Telecommunications (DECT);Common Interface (CI); Part 4: Data Link Control (DLC) layer".[5]ETS 300 175-5: "Digital Enhanced Cordless Telecommunications (DECT);Common Interface (CI); Part 5: Network (NWK) layer".[6]ETS 300 175-6: "Digital Enhanced Cordless Telecommunications (DECT);Common Interface (CI); Part 6: Identities and addressing".[7]ETS 300 175-7: "Digital Enhanced Cordless Telecommunications (DECT);Common Interface (CI); Part 7: Security features".[8]ETS 300 175-8: "Digital Enhanced Cordless Telecommunications (DECT);Common Interface (CI); Part 8: Speech coding and transmission".[9]ETS 300 175-9: "Digital Enhanced Cordless Telecommunications (DECT);Common Interface (CI); Part 9: Public Access Profile (PAP)".[10]ETS 300 434-1: "Digital Enhanced Cordless Telecommunications (DECT) andIntegrated Services Digital Network (ISDN) interworking for end systemconfiguration; Part 1: Interworking specification".[11]ETS 300 434-2: "Digital Enhanced Cordless Telecommunications (DECT) andIntegrated Services Digital Network (ISDN) interworking for end systemconfiguration; Part 2: Access profile".[12]ETS 300 476-4: "Digital Enhanced Cordless Telecommunications (DECT);Common Interface (CI); Protocol Implementation Conformance Statement(PICS) proforma; Part 4: Network (NWK) layer - Fixed radio Termination (FT)".SIST ETS 300 705-2:2000



Page 10ETS 300 705-2: June 1997[13]ETS 300 476-5: "Digital Enhanced Cordless Telecommunications (DECT);Common Interface (CI); Protocol Implementation Conformance Statement(PICS) proforma; Part 5: Data Link Control (DLC) layer - Fixed radio Termination(FT)".[14]ETS 300 476-6: "Digital Enhanced Cordless Telecommunications (DECT);Common Interface (CI); Protocol Implementation Conformance Statement(PICS) proforma; Part 6: Medium Access Control (MAC) layer - Fixed radioTermination (FT)".[15]ETS 300 476-7: "Digital Enhanced Cordless Telecommunications (DECT);Common Interface (CI); Protocol Implementation Conformance Statement(PICS) proforma; Part 7: Physical layer".[16]ISO/IEC 9646-1 (1991): "Information technology - Open SystemsInterconnection - Conformance testing methodology and framework - Part 1:General concepts". (See also CCITT Recommendation X.290 (1991)).[17]ISO/IEC 9646-6 (1991): "Information technology - Open SystemsInterconnection - Conformance testing methodology and framework - Part 6:Protocol profile test specification".[18]ISO/IEC 9646-7 (1991): "Information technology - Open SystemsInterconnection - Conformance testing methodology and framework - Part 7:Implementation conformance statement".[19]ETS 300 406: "Methods for Testing and Specification (MTS); Protocol andprofile conformance testing specifications; Standardization methodology".[20]ETS 300 403-1: "Integrated Services Digital Network (ISDN); Digital SubscriberSignalling System No. one (DSS1) protocol; Signalling network layer forcircuit-mode basic call control; Part 1: Protocol specification [ITU-TRecommendation Q.931 (1993), modified]".[21]ETS 300 403-3: "Integrated Services Digital Network (ISDN); Digital SubscriberSignalling System No. one (DSS1) protocol; Signalling network layer forcircuit-mode basic call control; Part 3: Protocol Implementation ConformanceStatement (PICS) proforma specification".[22]ETS 300 402-2: "Integrated Services Digital Network (ISDN); Digital SubscriberSignalling System No. one (DSS1) protocol; Data link layer; Part 2: Generalprotocol specification [ITU-T Recommendation Q.921 (1993), modified]".[23]ETS 300 402-4: "Integrated Services Digital Network (ISDN); Digital SubscriberSignalling System No. one (DSS1) protocol; Data link layer; Part 4: ProtocolImplementation Conformance Statement (PICS) proforma specification for thegeneral protocol".[24]ETS 300 011 (1992): "Integrated Services Digital Network (ISDN); Primary rateuser-network interface; Layer 1 specification and test principles".[25]ETS 300 011/A2: "Amendment 2 to ETS 300 011 (1992), adding a SCS, a PICSand a PIXIT for interface points Ia and Ib".[26]ETS 300 012 (1992): "Integrated Services Digital Network (ISDN); Basic user-network interface; Layer 1 specification and test principles".[27]ETS 300 012/A2: "Amendment 2 to ETS 300 012 (1992), adding a SCS, a PICSand a PIXIT for interface points Ia and Ib".SIST ETS 300 705-2:2000



Page 11ETS 300 705-2: June 1997[28]ETS 300 196-1: "Integrated Services Digital Network (ISDN); Generic functionalprotocol for the support of supplementary services; Digital Subscriber SignallingSystem No. one (DSS1) protocol; Part 1: Protocol specification".[29]ETS 300 196-2: "Integrated Services Digital Network (ISDN); Generic functionalprotocol for the support of supplementary services; Digital Subscriber SignallingSystem No. one (DSS1) protocol; Part 2: Protocol Implementation ConformanceStatement (PICS) proforma specification".3Definitions and abbreviations3.1DefinitionsFor the purposes of this ETS, the following terms and definitions apply:a)the terms defined in ISO/IEC 9646-7 [18];b)the definitions in ETS 300 434-1 [10] and ETS 300 434-2 [11]; andc)the following terms defined in ISO/IEC 9646-1 [16]:-PICS proforma;-Profile Implementation Conformance Statement (Profile ICS).3.2AbbreviationsFor the purposes of this ETS, the abbreviations defined in ISO/IEC 9646-1 [16], the abbreviations definedin ETS 300 434-1 [10] and ETS 300 434-2 [11] apply.4Conformance requirement concerning Profile ICSThe supplier of a protocol implementation which is claimed to conform to the Fixed Termination specificrequirements of ETS 300 434-1 [10] and ETS 300 434-2 [11] shall:-verify that his protocol implementation meets the Profile Requirements Lists (Profile RLs) for eachDECT protocol layer, contained in annex B of this ETS;-complete a copy of the Profile specific ICS proforma provided in annex C;-complete a copy of the System Conformance Statement (SCS) proforma provided in annex A; and-provide the information necessary to identify both the supplier and the implementation.Tables 1 and 2 provide guidance to indicate how to fulfil the PICS proforma required for the profile.SIST ETS 300 705-2:2000



Page 12ETS 300 705-2: June 1997Table 1: DECT PICS proforma tablePICSTablesChangeETS 300 476-4 [12]A.12Status column updated by RL subclause B.2.1.1A.13 to A.16Status column updated by RL subclause B.2.1.2A.18 to A.20Status column updated by RL subclause B.2.1.3A.23 to A.24Status column updated by RL subclause B.2.1.3A.25 to A.26Status column updated by RL subclause B.2.1.4.1A.51 to A.55Status column updated by RL subclause B.2.1.4.2A.58Status column updated by RL subclause B.2.1.4.2A.61 to A.71Status column updated by RL subclause B.2.1.4.2A.73 to A.74Status column updated by RL subclause B.2.1.4.2A.76 to A.78Status column updated by RL subclause B.2.1.4.2A.82Status column updated by RL subclause B.2.1.4.2A.85Status column updated by RL subclause B.2.1.4.2A.86 to A.87Status column updated by RL subclause B.2.1.4.3A.126 to A.129Status column updated by RL subclause B.2.1.4.4A.27 to A.41Tables replaced by annex D subclause D.2A.88 to A.89Tables replaced by annex D subclause D.2A.95Tables replaced by annex D subclause D.2A.101 to A.105Tables replaced by annex D subclause D.2A.209Tables replaced by annex D subclause D.3A.258Tables replaced by annex D subclause D.3A.285Tables replaced by annex D subclause D.3A.314Tables replaced by annex D subclause D.4All other tablesUnchangedETS 300 476-5 [13]A.9 to A.12Status column updated by RL subclause B.2.2.1A.13 to A.14Status column updated by RL subclause B.2.2.2A.16 to A.17Status column updated by RL subclause B.2.2.2A.28 to A.29Status column updated by RL subclause B.2.2.2A.32Status column updated by RL subclause B.2.2.2A.38Status column updated by RL subclause B.2.2.3A.54Status column updated by RL subclause B.2.2.4All other tablesUnchangedETS 300 476-6 [14]A.9 to A.12Status column updated by RL subclause B.2.3.1A.14 to A.15Status column updated by RL subclause B.2.3.1A.19 to A.25Status column updated by RL subclause B.2.3.1A.26 to A.28Status column updated by RL subclause B.2.3.2A.30 to A.33Status column updated by RL subclause B.2.3.2A.36 to A.37Status column updated by RL subclause B.2.3.2A.38 to A.39Status column updated by RL subclause B.2.3.3A.50 to A.51Status column updated by RL subclause B.2.3.4A.57 to A.60Status column updated by RL subclause B.2.3.4A.69 to A.70Status column updated by RL subclause B.2.3.4A.88Status column updated by RL subclause B.2.3.5All other tablesUnchangedETS 300 476-7 [15]A.15Status column updated by RL subclause B.2.4All other tablesUnchangedSIST ETS 300 705-2:2000



Page 13ETS 300 705-2: June 1997Table 2: ISDN PICS proforma tablePICSTablesChangeETS 300 403-3 [21]All tablesUnchangedETS 300 402-4 [23]All tablesUnchangedETS 300 011/A2 [25]All tablesUnchangedETS 300 012/A2 [27]All tablesUnchangedETS 300 196-2 [29]All tablesUnchangedSIST ETS 300 705-2:2000



Page 14ETS 300 705-2: June 1997Annex A (normative):System Conformance Statement (SCS) proforma forDECT FT IAPNotwithstanding the provisions of the copyright clause related to the text of this ETS, ETSI grants thatusers of this ETS may freely reproduce the SCS proforma in this annex so that it can be used for itsintended purposes and may further publish the completed SCS.A.1IdentificationA.1.1Description of the systemTable A.1: Description of the systemProduct name:Hardware version number:Software version number:CPU Type:Bus-System:Operating System Name:Operating System version number:Additional:A.1.2Supplier of the systemTable A.2: Supplier of the systemCompany:Street:Postal Code / City:Country:SIST ETS 300 705-2:2000



Page 15ETS 300 705-2: June 1997A.1.3Client identificationIf different from the supplier.Table A.3: Client identificationCompany:Street:Postal Code / City:Country:A.1.4Contact person identificationTable A.4: Contact person identificationName:Telephone:Fax:Telex:E-Mail:A.1.5Signature of the client or of the supplierTable A.5: Signature of the client or of the supplierName:Position:Signature:Date:SIST ETS 300 705-2:2000



Page 16ETS 300 705-2: June 1997A.2Protocol identificationThis table identifies the protocols that have to be supported. The PCTR Reference column may be used torefer to any PCTR that have been obtained for these protocols in this system.Table A.6: Protocol identificationItemProtocol nameSpecificationReferencePICSReferencePCTRReferencePr1ISDN L3 layerETS 300 403-1 [20]ETS 300 403-3 [21]Pr2ISDN L2 layerETS 300 402-2 [22]ETS 300 402-4 [23]Pr3ISDN L1 layerETS 300 011 [24]ETS 300 012 [26]ETS 300 011/A2 [25]ETS 300 012/A2 [27]Pr4ISDN Generic FunctionalETS 300 196 [28]ETS 300 196-2 [29]Pr5DECT NWK layerETS 300 175-5 [5]ETS 300 476-4 [12]Pr6DECT DLC layerETS 300 175-4 [4]ETS 300 476-5 [13]Pr7DECT MAC layerETS 300 175-3 [3]ETS 300 476-6 [14]Pr8DECT PH layerETS 300 175-2 [2]ETS 300 476-7 [15]A.3Profile identificationThis table identifies the profiles that have to be supported. The SCTR Reference column may be used torefer to any SCTR that have been obtained for these profiles in this system.Table A.7: Profile identificationItemProfile identifierSpecificationReferenceProfile specific ICSReferenceSCTR ReferencePo1Generic Access Profile (GAP)ETS 300 444ETS 300 474Po2ISDN Access Profile (IAP)ETS 300 434ETS 300 705A.4Combination description tableThis clause identifies which combinations of protocols are allowed cause of supporting these profiles, andwhich combinations not covered by the profile are also supported.Table A.8: Combination tableItemProfileProtocolc1Po1Pr5, Pr6, Pr7, Pr8c2Po2Po1, Pr1, Pr2, Pr3, Pr4A.5Configurability tableThis clause identifies what kind of configuration or reconfiguration is needed in order to use each of theidentified combinations.Table A.9: Configurability tableCombinationAvailable always?Available by dynamicreconfiguration?Available by staticreconfiguration?c1c2SIST ETS 300 705-2:2000



Page 17ETS 300 705-2: June 1997A.6Additional informationAny additional information which is relevant for the product may be given here (e.g. information that isneeded for further certification: quality system used, available certificates, etc.).SIST ETS 300 705-2:2000



Page 18ETS 300 705-2: June 1997Annex B (normative):Requirement lists for DECT FT IAPB.1GeneralThe supplier of a protocol implementation which is claimed to conform to the Fixed radio Termination (FT)specific requirements of ETS 300 434-1 [10] and ETS 300 434-2 [11] shall verify that his particular (NWK,DLC, MAC and PHL) layer protocol implementation meets the Profile RL for this layer. For this, he shallcomplete a copy of the corresponding layer PICS proforma contained in annex A of ETS 300 476 parts 4,5, 6 and 7 [12], [13], [14], and [15] updated with the requirements from this annex.B.1.1Profile Requirement List (Profile RL)The profile requirement list (profile RL) for the NWK, DLC, MAC and PHL layers as defined in this annex isbased on ETS 300 476 Parts 4, 5, 6 and 7 [12], [13], [14] and [15]. For every capability listed inETS 300 476 Parts 4, 5, 6 and 7 [12], [13], [14] and [15], the profile requirements are expressed byrestriction upon allowed support answers in ETS 300 476 Parts 4, 5, 6 and 7 [12], [13], [14] and [15
...