SIST ETS 300 758-3:2000

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Network (ISDN); DECT/ISDN interworking for end system configuration; Profile Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) for Fixed radio Termination (FT)33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:ETS 300 758-3 E13SIST ETS 300 758-3:en01-QRYHPEHr-3SIST ETS 300 758-3:SLOVENSKI
STANDARD



SIST ETS 300 758-3:2000



EUROPEANETS 300 758-3TELECOMMUNICATIONApril 1997STANDARDSource: ETSI EP-DECTReference: DE/DECT-040018-3ICS:33.020Key words:DECT, ISDN, interworking, PTS, radio, testing, TTCNDigital Enhanced Cordless Telecommunications (DECT);Integrated Services Digital Network (ISDN);DECT/ISDN interworking for end system configuration;Profile Test Specification (PTS);Part 3: Profile Specific Test Specification (PSTS)for Fixed radio Termination (FT)ETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.frTel.: +33 4 92 94 42 00 - Fax: +33 4 93 65 47 16Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1997. All rights reserved.SIST ETS 300 758-3:2000



Page 2ETS 300 758-3: April 1997Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title page.SIST ETS 300 758-3:2000



Page 3ETS 300 758-3: April 1997ContentsForeword.71Scope.92Normative references.93Definitions and abbreviations.123.1Definitions.123.2Abbreviations.124DECT NWK layer protocol.144.1Additional test purposes.144.2Abstract test method.144.3Relevant test cases.154.4Modified test cases.175DECT DLC layer protocol.185.1Additional test purposes.185.2Abstract test method.205.3Relevant test cases.205.4Additional test cases.206DECT MAC layer protocol.216.1Additional test purposes.216.2Abstract test method.226.3Relevant test cases.226.4Additional Test Cases.247DECT Physical Layer (PHL) protocol.247.1Additional Test Purposes.247.2Abstract test method.247.3Relevant test cases.248ISDN protocols.258.1Applicability of ATS.258.2ISDN primary access protocols.258.2.1Additional test purposes.258.2.2Abstract test method.258.2.3Relevant test cases.258.2.4Additional selection expression.258.3ISDN basic access protocols.268.3.1Additional test purposes.268.3.2Abstract test method.268.3.3Relevant test cases.268.3.4Additional selection expression.269DECT GAP profile.269.1Additional test purposes.269.2Abstract test method.269.3Relevant test cases.2610DECT/ISDN IAP profile.2710.1Profile test suite structure.2710.1.1Test groups.2710.1.1.1Protocol groups.2810.1.1.1.1The IWU procedures.28SIST ETS 300 758-3:2000



Page 4ETS 300 758-3: April 199710.1.1.1.2The IWU mappings.2810.1.1.1.3The profile specific NWK procedures.2810.1.1.1.4The profile specific DLC procedures.2810.1.1.2Main test groups.2810.1.1.2.1Capability (CA) tests.2910.1.1.2.2Valid Behaviour (BV) tests.2910.1.1.2.3Inopportune Behaviour (BO) tests.2910.1.1.2.4Invalid Behaviour (BI) tests.2910.2Profile test purposes.2910.2.1TP definition conventions.2910.2.2TP naming conventions.3010.2.3Sources of TP definitions.3010.2.4Test purposes for call establishment procedures.3110.2.5Test purposes for call information procedures.3210.2.6Test purposes for call release procedures.3310.2.7Test purposes for supplementary service specific procedures.3410.2.8Test purposes for CISS functional protocol procedures.3810.2.9Test purposes for CRSS functional protocol procedures.3910.2.10Test purposes for CRSS keypad protocol procedures.4510.2.11Test purposes for IWU messages mapping.4610.2.12Test purposes for IWU management of call control protocol.4810.2.13Test purposes for segmented messages.4810.3Profile Abstract Test Method (ATM).4810.4Profile Untestable test purposes.4910.5Profile ATS Conventions.4910.5.1Declarations part naming conventions.5010.5.1.1Type and structured type definitions.5010.5.1.2Operations definitions.5010.5.1.3Parameter declarations.5010.5.1.4Selection expression definitions.5010.5.1.5Constant declarations.5010.5.1.6Test suite variable declarations.5010.5.1.7Test case variable declarations.5110.5.1.8PCO declarations.5110.5.1.9Timer declarations.5110.5.1.10ASP type definitions.5110.5.1.11PDU type definitions.5110.5.1.12Alias definitions.5210.5.2Constraints part naming conventions.5210.5.3Dynamic part naming conventions.5210.5.3.1Test Case identifier.5210.5.3.2Test step identifier.5310.5.3.3Default identifier.5310.5.3.4General aspects.5310.5.3.5ATS abbreviations.5310.5.4Declaration part implementation conventions.5310.5.5Constraint part implementation conventions.5410.5.6Dynamic part implementation conventions.5410.5.7Documentation implementation conventions.5510.6Test case and test purpose mapping.55Annex A (normative):Profile Implementation eXtra Information for Testing (IXIT) proforma forDECT/ISDN IAP profile - Fixed radio Termination (FT).56A.1Identification summary.56A.2ATS summary.56A.3Test laboratory.56A.4Client identification.57A.5System Under Test (SUT).57SIST ETS 300 758-3:2000



Page 5ETS 300 758-3: April 1997A.6Profile information.58Annex B (normative):Profile Conformance Test Report (Profile CTR) proforma for DECT/ISDN IAPprofile - Fixed radio Termination (FT).60B.1Identification summary.60B.1.1Protocol conformance test report.60B.1.2IUT identification.60B.1.3Testing environment.61B.1.4Limits and reservation.61B.1.5Comments.61B.2IUT conformance status.61B.3Static conformance summary.62B.4Dynamic conformance summary.62B.5Static conformance review report.62B.6Test campaign report.63B.7Observations.64Annex C (normative):System Conformance Test Report proforma (SCTR) for DECT/ISDN IAPprofile - Fixed radio Termination (FT).65C.1Identification summary.65C.1.1System conformance test report.65C.1.2Test laboratory.65C.1.3Client identification.66C.1.4SUT.66C.1.5Profile identification.66C.1.6Nature of conformance testing.67C.1.7Limits and reservations.67C.1.8Record of agreement.67C.1.9Comments.68C.2System report summary for DECT/ISDN IAP FT.68C.2.1Profile testing summary for DECT NWK layer protocol.68C.2.2Profile testing summary for DECT DLC layer protocol.69C.2.3Profile testing summary for DECT MAC layer protocol.70C.2.4Profile testing summary for DECT PHL protocol.71C.2.5Profile testing summary for ISDN L3, L2, L1 primary access protocol.72C.2.6Profile testing summary for ISDN L3, L2, L1 basic access protocol.73C.2.7Profile testing summary for DECT GAP profile.74C.2.8Profile testing summary for DECT/ISDN IAP profile.75Annex D (normative):Profile eXtra Requirement List (XRL) proforma for DECT/ISDN IAP profile -Fixed radio Termination (FT).76D.1ISDN primary access protocols.76D.2ISDN basic access protocols.76Annex E (normative):Modifications of the PCTR proforma related to DECT/ISDN IAP profile -Fixed radio Termination (FT).77E.1Modifications of DECT NWK layer PCTR proforma.77E.2Modifications of DECT DLC layer PCTR proforma.80SIST ETS 300 758-3:2000



Page 6ETS 300 758-3: April 1997E.3Modifications of DECT MAC layer PCTR proforma.82E.4Observations.84Annex F (normative):Abstract Test Suite (ATS) for DECT NWK layer conforming to DECT/ISDNIAP profile - Fixed radio Termination (FT).85F.1The machine processable ATS (TTCN.MP).85F.2The graphical ATS (TTCN.GR).85Annex G (normative):Abstract Test Suite (ATS) for DECT DLC layer conforming to DECT/ISDNIAP profile - Fixed radio Termination (FT).86G.1The machine processable ATS (TTCN.MP).86G.2The graphical ATS (TTCN.GR).86Annex H (normative):Abstract Test Suite (ATS) for DECT MAC layer conforming to DECT/ISDNIAP profile - Fixed radio Termination (FT).87H.1The machine processable ATS (TTCN.MP).87H.2The graphical ATS (TTCN.GR).87Annex I (normative):Abstract Test Suite (ATS) - DECT/ISDN IAP - Fixed radio Termination (FT).88I.1The machine processable ATS (TTCN.MP).88I.2The graphical ATS (TTCN.GR).88History.89SIST ETS 300 758-3:2000



Page 7ETS 300 758-3: April 1997ForewordThis European Telecommunication Standard (ETS) has been produced by the Digital Enhanced CordlessTelecommunications (DECT) Project of the European Telecommunications Standards Institute (ETSI).This ETS consists of 3 parts as follows:Part 1:"PTS - summary".Part 2:"Profile Specific Test Specification (PSTS) for Portable radio Termination (PT)".Part 3:"Profile Specific Test Specification (PSTS) for Fixed radio Termination (FT)".Transposition datesDate of adoption:4 April 1997Date of latest announcement of this ETS (doa):31 July 1997Date of latest publication of new National Standardor endorsement of this ETS (dop/e):31 January 1998Date of withdrawal of any conflicting National Standard (dow):31 January 1998SIST ETS 300 758-3:2000



Page 8ETS 300 758-3: April 1997Blank pageSIST ETS 300 758-3:2000



Page 9ETS 300 758-3: April 19971ScopeThis European Telecommunication Standard (ETS) contains the test specification for Digital EnhancedCordless Telecommunications/Integrated Services Digital Network (DECT/ISDN) Interworking AccessProfile (IAP) Fixed Part (FP) applications as specified in ETS 300 434-1 [6] and ETS 300 434-2 [7].This test specification provides conformance tests for DECT/ISDN terminal equipment conforming toETS 300 434-1 [6] and ETS 300 434-2 [7]. The main objective is to perform a high probability of inter-operability between the DECT/ISDN terminal equipment and an ISDN network. The DECT/ISDN terminalequipment contains Fixed Part and Portable Parts that may be supplied by different manufacturers.The ISO standard for the methodology of conformance testing ISO/IEC 9646 [22] to [28] is used as thebasis for the test methodology, and as the basis for test case specification.The test cases if listed in this ETS have been derived from the corresponding Abstract Test Suite (ATS).Additional DECT/ISDN IAP specific test cases are included where required.Annex A provides Profile Implementation eXtra Information for Testing (IXIT) proforma part of thisspecification.Annex B provides Profile Conformance Test Report (Profile CTR) proforma part of this specification.Annex C provides System Conformance Test Report proforma (SCTR) part of this specification.Annex D provides the Profile IXIT Requirements List (XRL) proforma part of this specification.Annex E provides modifications of DECT layer Protocol Conformance Test Report (PCTR) proforma ofthis specification.Annex F provides the Tree and Tabular Combined Notation (TTCN) part for DECT Network (NWK) layerconforming to the requirements of this specification.Annex G provides the Tree and Tabular Combined Notation (TTCN) part for DECT Data Link Control(DLC) layer conforming to the requirements of this specification.Annex H provides the Tree and Tabular Combined Notation (TTCN) part for DECT MAC layer conformingto the requirements of this specification.Annex I provides the Tree and Tabular Combined Notation (TTCN) part for DECT/ISDN Interworking Unit(IWU) - IAP profile.2Normative references[1]ETS 300 175-2: "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common Interface (CI); Part 2: PhysicalLayer".[2]ETS 300 175-3: "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common Interface (CI); Part 3: MediumAccess Control (MAC) layer".[3]ETS 300 175-4: "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common Interface (CI); Part 4: DataLink Control (DLC) layer".[4]ETS 300 175-5: "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common Interface (CI); Part 5: Network(NWK) layer".[5]ETS 300 444 (1995): "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Generic Access Profile (GAP)".SIST ETS 300 758-3:2000



Page 10ETS 300 758-3: April 1997[6]ETS 300 434-1: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT) and Integrated Services Digital Network(ISDN) interworking for end system configuration; Part 1: Interworkingspecification".[7]ETS 300 434-2: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT) and Integrated Services Digital Network(ISDN) interworking for end system configuration; Part 2: Access profile".[8]ETS 300 176: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Approval test specification".[9]ETS 300 476-4: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Common Interface (CI); ProtocolImplementation Conformance Statement (PICS) proforma; Part 4: Network(NWK) layer - Fixed radio Termination (FT)".[10]ETS 300 476-5: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Common Interface (CI); ProtocolImplementation Conformance Statement (PICS) proforma; Part 5: Data LinkControl (DLC) layer - Fixed radio Termination (FT)".[11]ETS 300 476-6: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Common Interface (CI); ProtocolImplementation Conformance Statement (PICS) proforma; Part 6: MediumAccess Control (MAC) layer - Fixed radio Termination (FT)".[12]ETS 300 476-7: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Common Interface (CI); ProtocolImplementation Conformance Statement (PICS) proforma; Part 7: Physicallayer".[13]ETS 300 474-2: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Generic Access Profile (GAP); Profilerequirement list and profile specific Implementation Conformance Statement(ICS) proforma; Part 2: Fixed radio Termination (FT)"[14]ETS 300 705-2: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications/Integrated Services Digital Network(DECT/ISDN) interworking for end system configuration; Profile ImplementationConformance Statement (ICS); Part 2: Fixed radio Termination (FT)".[15]ETS 300 497-1: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Common Interface (CI) Test CaseLibrary (TCL); Part 1: Test Suite Structure (TSS) and Test Purposes (TP) forMedium Access Control (MAC) layer".[16]ETS 300 497-3: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Common Interface (CI) Test CaseLibrary (TCL); Part 3: Abstract Test Suite (ATS) for Medium Access Control(MAC) layer - Fixed radio Termination (FT)".[17]ETS 300 497-4: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Common Interface (CI) Test CaseLibrary (TCL); Part 4: Test Suite Structure (TSS) and Test Purposes (TP) - DataLink Control (DLC) layer".[18]ETS 300 497-5: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Common Interface (CI) Test CaseLibrary (TCL); Part 5: Abstract Test Suite (ATS) - Data Link Control (DLC)layer".SIST ETS 300 758-3:2000



Page 11ETS 300 758-3: April 1997[19]ETS 300 497-8: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Common Interface (CI) Test CaseLibrary (TCL); Part 8: Test Suite Structure (TSS) and Test Purposes (TP) -Network (NWK) layer - Fixed radio Termination (FT)".[20]ETS 300 497-9: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Common Interface (CI) Test CaseLibrary (TCL); Part 9: Abstract Test Suite (ATS) for Network (NWK) layer - Fixedradio Termination (FT)".[21]ETS 300 494-3: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Generic Access Profile (GAP); ProfileTest Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) -Fixed radio Termination (FT)".[22]ISO/IEC 9646-1 (1991): "Information technology - Open SystemsInterconnection - Conformance testing methodology and framework - Part 1:General concepts". (See also CCITT Recommendation X.290 (1991)).[23]ISO/IEC 9646-2 (1991): "Information technology - Open SystemsInterconnection - Conformance testing methodology and framework - Part 2:Abstract test suite specification". (See also CCITT Recommendation X.291(1991)).[24]ISO/IEC 9646-3 (1991): "Information technology - Open SystemsInterconnection - Conformance testing methodology and framework - Part 3:The tree and tabular combined notation". (See also CCITT RecommendationX.292 (1992)).[25]ISO/IEC 9646-4 (1991): "Information technology - Open SystemsInterconnection - Conformance testing methodology and framework - Part 4:Test realisation". (See also CCITT Recommendation X.292 (1992)).[26]ISO/IEC 9646-5 (1991): "Information technology - O
...