SIST EN 301 241-2:2000
(Main)Digital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Network (ISDN); DECT/ISDN interworking for intermediate system configuration; Profile Implementation Conformance Statement (ICS); Part 2: Fixed radio Termination (FT)
- Abstract
Profile ICS for voluntary testing of terminals complying to DE/RES-03039 (DECT/ISDN ISC).
- Status
- Published
- Publication Date
- 31-Dec-1999
- Technical Committee
- RES - Radio equipment and systems
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Jan-2000
- Due Date
- 01-Jan-2000
- Completion Date
- 01-Jan-2000
- Mandate
- T-306
Buy Documents
SIST EN 301 241-2:2000 is the Slovenian adoption of ETSI EN 301 241-2 V1.1.1 for Digital Enhanced Cordless Telecommunications (DECT) and Integrated Services Digital Network (ISDN) interworking for intermediate system configuration at the Fixed radio Termination (FT). It provides the Profile Implementation Conformance Statement (Profile ICS) proforma and the related requirement lists that suppliers use when declaring conformance for implementations covered by ETS 300 822.
For a supplier, test lab, or buyer, the document shows what must be declared, which DECT and ISDN protocol layers are in scope, and how the conformance paperwork is structured.
What does SIST EN 301 241-2:2000 specify?
SIST EN 301 241-2:2000 specifies the Profile ICS proforma for the DECT/ISDN interworking profile at FT, in line with ETS 300 822 and the conformance-statement guidance of ISO/IEC 9646-7. It is a conformance-documentation standard: it tells an implementation supplier how to state support, not how to design the protocol.
The document is organized into four clauses and three normative annexes:
| Part | What it covers |
|---|---|
| Clause 1 | Scope |
| Clause 2 | References |
| Clause 3 | Definitions and abbreviations |
| Clause 4 | Conformance requirement concerning Profile ICS |
| Annex A | System Conformance Statement (SCS) proforma for DECT FT IIP |
| Annex B | Requirements Lists (RLs) for DECT NWK, DLC and MAC layers |
| Annex C | Profile specific ICS proforma for DECT FT IIP |
What are the key requirements of SIST EN 301 241-2:2000?
The central requirement in Clause 4 is that a supplier claiming conformance to the FT-specific requirements of ETS 300 822 and ETS 300 434-2 shall verify the profile requirement lists, complete the profile-specific ICS, complete the SCS, and provide identification of the supplier and the implementation. In practice, the standard requires a traceable conformance declaration, not just a general statement of compatibility.
How the conformance forms are used
Annex B says the profile RLs are based on the ETS 300 476 PICS proformas for the DECT layers. The status symbols - such as mandatory, optional, prohibited, conditional, and out-of-scope - tell the supplier how each capability must be marked. This matters because the completed tables are the main evidence used in conformance testing and certification.
Table 1 in Clause 4 shows which ETS 300 476 tables are updated by the profile RLs. That lets a supplier or test lab focus on the specific items that change for this FT profile.
What the DECT network layer must cover
Annex B makes the DECT network layer support revolve around Call Control (CC), Mobility Management (MM), Link Control Entity (LCE), and Lower Layer Management Entity (LLME). It also sets out required features, procedures, and messages for call handling, mobility handling, paging, link control, and management.
In practical terms, the implementation has to declare support for the key DECT control functions used by the FT profile, including incoming and outgoing call behavior, bearer selection, service change, authentication-related mobility functions, and paging-related LCE messages.
What the DLC and MAC layers must cover
For the Data Link Control (DLC) layer, Annex B requires support for C-plane services, U-plane services, Class B service, LU1 - Transparent Unprotected service (TRUP), LU7 64 kbit/s data bearer service, and related management and ciphering functions. This tells the reader that the profile is not limited to signaling - it also specifies the supported data-bearer behavior.
For the Medium Access Control (MAC) layer, Annex B requires connection oriented control, broadcast control, multiplexing, management, channels, bearer types, slot types, timers, and paging support. In practice, this is the radio-access part that the implementation must declare and, where relevant, test.
What Annex C adds
Annex C adds the profile-specific ICS proforma itself. It includes a global statement of conformance and specific tables for DECT NWK, DLC, and MAC profile options, including dynamic C-plane switching, dynamic U-plane switching, LU8, MAC timers, and MAC constants. If the answer to the global mandatory-capability question is “No”, the implementation is non-conforming.
What terms does SIST EN 301 241-2:2000 define?
- DECT - Digital Enhanced Cordless Telecommunications, the cordless communications system covered by the profile.
- FT - Fixed radio Termination, the fixed-side DECT termination addressed by this part.
- IIP - Intermediate ISDN access Profile, the profile whose conformance is being stated.
- ICS - Implementation Conformance Statement, a declaration of supported capabilities.
- PICS proforma - A standard form for recording protocol implementation conformance.
- SCS - System Conformance Statement, the system-level conformance declaration used alongside the profile ICS.
- RL - Requirements List, the table that states whether each capability is mandatory, optional, prohibited, or conditional.
Who uses SIST EN 301 241-2:2000?
SIST EN 301 241-2:2000 is used by suppliers of DECT/ISDN implementations, telecom equipment manufacturers, conformance test labs, and quality or certification teams. They use it to complete the ICS and SCS forms, check layer-by-layer support against ETS 300 822, and document what the implementation supports for voluntary conformance testing of terminals.
Which standards are used with SIST EN 301 241-2:2000?
| Standard | What it contributes |
|---|---|
| ETS 300 822 | Main DECT/ISDN interworking profile and FT-specific conformance target |
| ETS 300 434-2 | Additional DECT/ISDN interworking reference named for FT-specific requirements |
| EN 300 175-1 to EN 300 175-8 | DECT Common Interface overview, layers, identities, security, and speech coding |
| ETS 300 476-4 to ETS 300 476-7 | PICS proformas for the DECT NWK, DLC, MAC and PH layers |
| ISO/IEC 9646-1 and ISO/IEC 9646-7 | Conformance testing framework and ICS methodology |
| EN 300 403-1 and EN 300 403-3 | ISDN DSS1 network layer specification and its PICS proforma |
| ETS 300 402-2 and ETS 300 402-4 | ISDN DSS1 data link layer specification and its PICS proforma |
| ETS 300 011 and ETS 300 012 | ISDN layer 1 specifications and test principles |
| ISO/IEC 9646-6 and ETS 300 406 | Conformance testing and profile-testing guidance |
What does the SIST EN 301 241-2:2000 document contain?
The document contains fill-in proformas and requirement tables rather than protocol text. Annex A provides identification fields for the system, supplier, client, contacts, protocol identification, and profile identification. Annex B lists the DECT layer entities, services, procedures, messages, timers, channels, bearer types, slot types, and paging support that make up the FT profile. Annex C provides the profile-specific ICS tables for declaring support and the guidance for completing them.
Buy Documents
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 301 241-2:2000 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Digital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Network (ISDN); DECT/ISDN interworking for intermediate system configuration; Profile Implementation Conformance Statement (ICS); Part 2: Fixed radio Termination (FT)". This standard covers: Profile ICS for voluntary testing of terminals complying to DE/RES-03039 (DECT/ISDN ISC).
Profile ICS for voluntary testing of terminals complying to DE/RES-03039 (DECT/ISDN ISC).
SIST EN 301 241-2:2000 is classified under the following ICS (International Classification for Standards) categories: 33.070.30 - Digital Enhanced Cordless Telecommunications (DECT); 33.080 - Integrated Services Digital Network (ISDN). The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 301 241-2:2000 is associated with the following European legislation: Standardization Mandates: T-306. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 301 241-2:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Network (ISDN); DECT/ISDN interworking for intermediate system configuration; Profile Implementation Conformance Statement (ICS); Part 2: Fixed radio Termination (FT)33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:EN 301 241-2 V1.1.13SIST EN 301 241-2:en01-QRYHPEHU-3SIST EN 301 241-2:SLOVENSKI
STANDARD
EN 301 241-2 V1.1.1 (1998-12)European Standard (Telecommunications series)Digital Enhanced Cordless Telecommunications (DECT);Integrated Services Digital Network (ISDN);DECT/ISDN interworking for intermediatesystem configuration;Profile Implementation Conformance Statement (ICS);Part 2: Fixed radio Termination (FT)SIST EN 301 241-2:2000
ETSIEN 301 241-2 V1.1.1 (1998-12)2ReferenceDEN/DECT-040103-2 (bhoi0ico.PDF)KeywordsDECT, ICS, ISDN, profileETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/88Internetsecretariat@etsi.frIndividual copies of this ETSI deliverablecan be downloaded fromhttp://www.etsi.orgCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1998.All rights reserved.SIST EN 301 241-2:2000
ETSIEN 301 241-2 V1.1.1 (1998-12)3ContentsIntellectual Property Rights.5Foreword.51Scope.62References.62.1Normative references.62.2Informative references.73Definitions and abbreviations.83.1Definitions.83.2Abbreviations.84Conformance requirement concerning Profile ICS.9Annex A (normative):System Conformance Statement (SCS) proforma for DECT FT IIP.10A.1Identification.10A.1.1Description of the system.10A.1.2Supplier of the system.10A.1.3Client identification.11A.1.4Contact person identification.11A.1.5Signature of the client or of the supplier.11A.2Protocol identification.12A.3Profile identification.12A.4Additional information.12Annex B (normative):RLs for DECT PT IIP.13B.1General.13B.1AProfile RL.13B.2RL on DECT Network layer.14B.2.1Network entities.14B.2.2Network features.14B.2.2.1CC features.14B.2.2.2MM features.14B.2.2.3LCE features.15B.2.3Procedures.15B.2.3.1CC procedures supported.15B.2.3.2MM procedures supported.16B.2.3.3LCE procedures supported.17B.2.3.4LLME procedures supported.17B.2.4Messages.17B.2.4.1CC messages.18B.2.4.2MM messages.18B.2.4.3LCE messages.19B.3RL on DECT DLC layer.19B.3.1Services.19B.3.1.1Data link services.19B.3.1.2C-plane services.20B.3.1.3U-plane services.20B.3.1.4Management services.20B.3.2Procedures.20B.3.2.1Generic signalling procedures.20B.3.2.2Class B procedures.20SIST EN 301 241-2:2000
ETSIEN 301 241-2 V1.1.1 (1998-12)4B.3.2.3LU1 procedures.21B.3.2.4FU1 options.21B.3.2.5Management procedures.21B.3.2.6MAC connection management procedures.21B.3.2.7DLC C-plane management procedures.21B.3.2.8DLC U-plane management procedures.22B.3.2.9Connection ciphering management procedures.22B.3.3Parameters.22B.3.3ALU1 Connection types.22B.4RL on DECT MAC layer.22B.4.1Capabilities.22B.4.1.1Services.22B.4.1.1.1Connection oriented control services.23B.4.1.1.2Broadcast control services.23B.4.1.1.3Multiplexing services.23B.4.1.1.4Management services.24B.4.1.2Procedures.24B.4.1.2.1Connection procedures.24B.4.1.2.1.1Connection setup procedures.24B.4.1.2.1.2Connection modification procedures.25B.4.1.2.1.3Connection release procedures.25B.4.1.2.2Broadcast procedures.25B.4.2Protocol parameters.25B.4.2.1Timer support.25B.4.2.2Channels supported.25B.4.2.3Bearer types supported.26B.4.2.4Slot types supported.26B.4.2.5Paging tail messages supported.26Annex C (normative):Profile specific ICS proforma for DECT FT IIP.27C.1Guidance for completing the profile specific proforma.27C.1.1Purposes and structure.27C.1.2Instructions for completing the Profile specific ICS.29C.2Identification of the implementation.29C.2.1Date of statement.29C.2.2Identification of the implementation.29C.2.3Contact person identification.29C.2.4Relationship with the System Conformance Statement (SCS).30C.3Identification of the profile.30C.3.1Defect report numbers and amendments implemented.30C.3.2Addenda implemented.30C.4Profile ICS proforma tables.31C.4.1Global statement of conformance.31C.4.2Profile ICS DECT NWK layer tables.31C.4.3Profile ICS DECT DLC layer tables.31C.4.4Profile ICS DECT MAC layer tables.32History.33SIST EN 301 241-2:2000
ETSIEN 301 241-2 V1.1.1 (1998-12)5Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respectof ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on theETSI Web server (http://www.etsi.org/ipr).Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guaranteecan be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Project Digital Enhanced CordlessTelecommunications (DECT).The present document is part 2 of a multi-part standard covering the DECT/ISDN interworking for intermediate systemconfiguration Profile Implementation Conformance Statement (ICS), as identified below:Part 1:"Portable radio Termination (PT)";Part 2:"Fixed radio Termination (FT)".National transposition datesDate of adoption of this EN:23 October 1998Date of latest announcement of this EN (doa):31 January 1999Date of latest publication of new National Standardor endorsement of this EN (dop/e):31 July 1999Date of withdrawal of any conflicting National Standard (dow):31 July 1999SIST EN 301 241-2:2000
ETSIEN 301 241-2 V1.1.1 (1998-12)61ScopeThe present document provides the Profile Implementation Conformance Statement (Profile ICS) proforma for theDECT/ISDN interworking for intermediate system configuration profile at the Fixed radio Termination (FT) as definedin ETS 300 822 [9] in compliance with the relevant requirements and in accordance with the relevant guidance given inISO/IEC 9646-7 [17].The supplier of an implementation which claims to conform to ETS 300 822 [9] is required to complete a copy of thePICS proforma ETS 300 476 parts 4 [12], 5 [13], 6 [14], and 7 [15], with the replacements provided by the RequirementLists (RLs) given in annex B of the present document, as well as a copy of the specific ICS proforma provided in theannex C of the present document.2ReferencesReferences may be made to:a)specific versions of publications (identified by date of publication, edition number, version number, etc.), inwhich case, subsequent revisions to the referenced document do not apply; orb)all versions up to and including the identified version (identified by "up to and including" before the versionidentity); orc)all versions subsequent to and including the identified version (identified by "onwards" following the versionidentity); ord)publications without mention of a specific version, in which case the latest version applies.A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the samenumber.2.1Normative references[1]EN 300 175-1: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI):Part 1: Overview".[2]EN 300 175-2: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 2: Physical layer (PHL)".[3]EN 300 175-3: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 3: Medium Access Control (MAC) layer".[4]EN 300 175-4: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 4: Data Link Control (DLC) layer".[5]EN 300 175-5: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 5: Network (NWK) layer".[6]EN 300 175-6: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 6: Identities and addressing".[7]EN 300 175-7: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 7: Security features".[8]EN 300 175-8: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 8: Speech coding and transmission".[9]ETS 300 822: "Digital Enhanced Cordless Telecommunications (DECT); Integrated ServicesDigital Network (ISDN); DECT/ISDN interworking for intermediate system configuration;Interworking and profile specification".SIST EN 301 241-2:2000
ETSIEN 301 241-2 V1.1.1 (1998-12)7[10]ETS 300 434-1: "Digital Enhanced Cordless Telecommunications (DECT) and Integrated ServicesDigital Network (ISDN); DECT/ISDN interworking for end system configuration; Part 1:Interworking specification".[11]ETS 300 434-2: "Digital Enhanced Cordless Telecommunications (DECT) and Integrated ServicesDigital Network (ISDN); DECT/ISDN interworking for end system configuration; Part 2: Accessprofile".[12]ETS 300 476-4: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface(CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 4: Network (NWK)layer - Fixed radio Termination (FT)".[13]ETS 300 476-5: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface(CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 5: Data LinkControl (DLC) layer - Fixed radio Termination (FT)".[14]ETS 300 476-6: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface(CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 6: Medium AccessControl (MAC) layer - Fixed radio Termination (FT)".[15]ETS 300 476-7: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface(CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 7: Physical layer".[16]ISO/IEC 9646-1: "Information technology; Open Systems Interconnection; Conformance testingmethodology and framework; Part 1: General concepts".[17]ISO/IEC 9646-7: "Information technology; Open Systems Interconnection; Conformance testingmethodology and framework; Part 7: Implementation Conformance Statements".[18]EN 300 403-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control; Part 1:Protocol specification [ITU-T Recommendation Q.931 (1993), modified]".[19]EN 300 403-3: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control; Part 3:Protocol Implementation Conformance Statement (PICS) proforma specification".[20]ETS 300 402-2: "Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Data link layer; Part 2: General protocol specification[ITU-T Recommendation Q.921 (1993), modified]".[21]ETS 300 402-4: "Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Data link layer; Part 4: Protocol Implementation ConformanceStatement (PICS) proforma specification for the general protocol".[22]ETS 300 011 (1992) including Amendment 2: "Integrated Services Digital Network (ISDN);Primary rate user-network interface; Layer 1 specification and test principles".[23]ETS 300 012 (1992) including Amendment 2: "Integrated Services Digital Network (ISDN); Basicuser-network interface; Layer 1 specification and test principles".2.2Informative references[24]ISO/IEC 9646-6: "Information technology; Open Systems Interconnection; Conformance testingmethodology and framework; Part 6: Protocol profile test specification".[25]ETS 300 406: "Methods for Testing and Specification (MTS); Protocol and profile conformancetesting specifications; Standardization methodology".SIST EN 301 241-2:2000
ETSIEN 301 241-2 V1.1.1 (1998-12)83Definitions and abbreviations3.1DefinitionsFor the purposes of the present document, the following terms and definitions apply:a)the terms defined in ISO/IEC 9646-7 [17];b)the definitions in ETS 300 434-1 [10] and ETS 300 434-2 [11]; andc)the following terms defined in ISO/IEC 9646-1 [16]:-PICS proforma;-Profile Implementation Conformance Statement (Profile ICS).3.2AbbreviationsFor the purposes of the present document, the following abbreviations apply:CCCall ControlC-planeControl planeDECTDigital Enhanced Cordless TelecommunicationsDLCData Link ControlFTFixed radio TerminationICSImplementation Conformance StatementIIPIntermediate ISDN access ProfileISDNIntegrated Services Digital NetworkLCELink Control EntityLLMELower Layer Management EntityMACMedium Access ControlMMMobility ManagementNWKNetworkPCTRProtocol Conformance Test ReportPHLPhysicalPICSProtocol Implementation Conformance StatementPPPortable PartPTPortable radio TerminationRLRequirements ListSCSSystem Conformance StatementSCTRSystem Conformance Test ReportTRUPTransparent Unprotected serviceU-planeUser planeSIST EN 301 241-2:2000
ETSIEN 301 241-2 V1.1.1 (1998-12)94Conformance requirement concerning Profile ICSThe supplier of a protocol implementation which is claimed to conform to the Fixed Termination specific requirementsof ETS 300 822 [9] and ETS 300 434-2 [11] shall:-verify that his protocol implementation meets the Profile RLs for each DECT protocol layer, contained inannex B of the present document;-complete a copy of the Profile specific ICS proforma provided in annex C;-complete a copy of the System Conformance Statement (SCS) proforma provided in annex A; and-provide the information necessary to identify both the supplier and the implementation.Table 1 provides guidance to indicate how to fulfil the PICS proforma required for the profile.Table 1: DECT PICS proforma tablePICSTablesChangeETS 300 476-4 [12]A.12Status column updated by RL subclause B.2.1A.13Status column updated by RL subclause B.2.2.1A.14Status column updated by RL subclause B.2.2.2A.16Status column updated by RL subclause B.2.2.3A.18Status column updated by RL subclause B.2.3.1A.19Status column updated by RL subclause B.2.3.2A.23Status column updated by RL subclause B.2.3.3A.24Status column updated by RL subclause B.2.3.4A.25 and A.26Status column updated by RL subclause B.2.4.1A.51 and A.52Status column updated by RL subclause B.2.4.2A.126 and A.127Status column updated by RL subclause B.2.4.3All other tablesUnchangedETS 300 476-5 [13]A.9Status column updated by RL subclause B.3.1.1A.10Status column updated by RL subclause B.3.1.2A.11Status column updated by RL subclause B.3.1.3A.12Status column updated by RL subclause B.3.1.4A.13Status column updated by RL subclause B.3.2.1A.16Status column updated by RL subclause B.3.2.2A.18Status column updated by RL subclause B.3.2.3A.19Status column updated by RL subclause B.3.2.4A.30Status column updated by RL subclause B.3.2.5A.31Status column updated by RL subclause B.3.2.6A.32Status column updated by RL subclause B.3.2.7A.33Status column updated by RL subclause B.3.2.8A.34Status column updated by RL subclause B.3.2.9A.40Status column updated by RL subclause B.3.3.1All other tablesUnchangedETS 300 476-6 [14],A.9Status column updated by RL subclause B.4.1.1A.10 to A.12 and A.14Status column updated by RL subclause B.4.1.1.1A.15Status column updated by RL subclause B.4.1.1.2A.19 to A.23Status column updated by RL subclause B.4.1.1.3A.24Status column updated by RL subclause B.4.1.1.4A.26 and A.29Status column updated by RL subclause B.4.1.2.1.1A.30Status column updated by RL subclause B.4.1.2.1.2A.33Status column updated by RL subclause B.4.1.2.1.3A.34Status column updated by RL subclause B.4.1.2.2A.41Status column updated by RL subclause B.4.2.1A.44Status column updated by RL subclause B.4.2.2A.45Status column updated by RL subclause B.4.2.3A.46Status column updated by RL subclause B.4.2.4A.58Status column updated by RL subclause B.4.2.5All other tablesUnchangedETS 300 476-7 [15]All tablesUnchangedSIST EN 301 241-2:2000
ETSIEN 301 241-2 V1.1.1 (1998-12)10Annex A (normative):System Conformance Statement (SCS) proforma for DECTFT IIPNotwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that usersof the present document may freely reproduce the SCS proforma in this annex so that it can be used for its intendedpurposes and may further publish the completed SCS.A.1IdentificationA.1.1Description of the systemTable A.1: Description of the systemProduct name:Hardware version number:Software version number:CPU type:Bus-system:Operating system name:Operating system version number:Additional:A.1.2Supplier of the systemTable A.2: Supplier of the systemCompany:Street:Postal code / city:Country:SIST EN 301 241-2:2000
ETSIEN 301 241-2 V1.1.1 (1998-12)11A.1.3Client identificationIf different from the supplier.Table A.3: Client identificationCompany:Street:Postal code / city:Country:A.1.4Contact person identificationTable A.4: Contact person identificationName:Telephone:Fax:Telex:E-mail:A.1.5Signature of the client or of the supplierTable A.5: Signature of the client or of the supplierName:Position:Signature:Date:SIST EN 301 241-2:2000
ETSIEN 301 241-2 V1.1.1 (1998-12)12A.2Protocol identificationThis table identifies the protocols that have to be supported. The PCTR reference column may be used to refer to anyPCTR that have been obtained for these protocols in this system.Table A.6: Protocol identificationItemProtocol nameSpecificationreferencePICSreferencePCTRreferencePr1ISDN L3 layerEN 300 403-1 [18]EN 300 403-3 [19]Pr2ISDN L2 layerETS 300 402-2 [20]ETS 300 402-4 [21]Pr3ISDN L1 layerETS 300 011 [22]ETS 300 012 [23]ETS 300 011/A2 [22]ETS 300 012/A2 [23]Pr4DECT NWK layerEN 300 175-5 [5]ETS 300 476-4 [12]Pr5DECT DLC layerEN 300 175-4 [4]ETS 300 476-5 [13]Pr6DECT MAC layerEN 300 175-3 [3]ETS 300 476-6 [14],Pr7DECT PH layerEN 300 175-2 [2]ETS 300 476-7 [15]A.3Profile identificationThis table identifies the profiles that have to be supported. The SCTR reference column may be used to refer to anySCTR that have been obtained for these profiles in this system.Table A.7: Profile identificationItemProfile identifierSpecificationreferenceProfile specific ICSreferenceSCTR referencePo1ISDN Intermediate SystemConfiguration Profile (IIP)ETS 300 822 [9]The present documentA.4Additional informationAny additional information which is relevant for the product may be given here (e.g. information that is needed forfurther certification: quality system used, available certificates, etc.).SIST EN 301 241-2:2000
ETSIEN 301 241-2 V1.1.1 (1998-12)13Annex B (normative):RLs for DECT PT IIPB.1GeneralThe supplier of a protocol implementation which is claimed to conform to the FT specific requirements ofETS 300 822 [9] shall verify that his particular (NWK, DLC, MAC and PHL) layer protocol implementation meets theProfile RL for this layer. For this, he shall complete a copy of the corresponding layer PICS proforma contained inannex A of ETS 300 476 parts 4 [12], 5 [13], 6 [14] and 7 [15] updated with the requirements from this annex.B.1AProfile RLThe Profile RL for the NWK, DLC, MAC and PHL layers as defined in this annex is based on ETS 300 476 parts4 [12], 5 [13], 6 [14] and 7 [15]. For every capability listed in ETS 300 476 parts 4 [12], 5 [13], 6 [14] and 7 [15], theprofile requirements are expressed by restriction upon allowed support answers in ETS 300
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Network (ISDN); DECT/ISDN interworking for intermediate system configuration; Profile Implementation Conformance Statement (ICS); Part 2: Fixed radio Termination (FT)33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:EN 301 241-2 Version 1.1.1SIST EN 301 241-2:2000en01-januar-2000SIST EN 301 241-2:2000SLOVENSKI
STANDARD
EN 301 241-2 V1.1.1 (1998-12)European Standard (Telecommunications series)Digital Enhanced Cordless Telecommunications (DECT);Integrated Services Digital Network (ISDN);DECT/ISDN interworking for intermediatesystem configuration;Profile Implementation Conformance Statement (ICS);Part 2: Fixed radio Termination (FT)SIST EN 301 241-2:2000
ETSIEN 301 241-2 V1.1.1 (1998-12)2ReferenceDEN/DECT-040103-2 (bhoi0ico.PDF)KeywordsDECT, ICS, ISDN, profileETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/88Internetsecretariat@etsi.frIndividual copies of this ETSI deliverablecan be downloaded fromhttp://www.etsi.orgCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1998.All rights reserved.SIST EN 301 241-2:2000
ETSIEN 301 241-2 V1.1.1 (1998-12)3ContentsIntellectual Property Rights.5Foreword.51Scope.62References.62.1Normative references.62.2Informative references.73Definitions and abbreviations.83.1Definitions.83.2Abbreviations.84Conformance requirement concerning Profile ICS.9Annex A (normative):System Conformance Statement (SCS) proforma for DECT FT IIP.10A.1Identification.10A.1.1Description of the system.10A.1.2Supplier of the system.10A.1.3Client identification.11A.1.4Contact person identification.11A.1.5Signature of the client or of the supplier.11A.2Protocol identification.12A.3Profile identification.12A.4Additional information.12Annex B (normative):RLs for DECT PT IIP.13B.1General.13B.1AProfile RL.13B.2RL on DECT Network layer.14B.2.1Network entities.14B.2.2Network features.14B.2.2.1CC features.14B.2.2.2MM features.14B.2.2.3LCE features.15B.2.3Procedures.15B.2.3.1CC procedures supported.15B.2.3.2MM procedures supported.16B.2.3.3LCE procedures supported.17B.2.3.4LLME procedures supported.17B.2.4Messages.17B.2.4.1CC messages.18B.2.4.2MM messages.18B.2.4.3LCE messages.19B.3RL on DECT DLC layer.19B.3.1Services.19B.3.1.1Data link services.19B.3.1.2C-plane services.20B.3.1.3U-plane services.20B.3.1.4Management services.20B.3.2Procedures.20B.3.2.1Generic signalling procedures.20B.3.2.2Class B procedures.20SIST EN 301 241-2:2000
ETSIEN 301 241-2 V1.1.1 (1998-12)4B.3.2.3LU1 procedures.21B.3.2.4FU1 options.21B.3.2.5Management procedures.21B.3.2.6MAC connection management procedures.21B.3.2.7DLC C-plane management procedures.21B.3.2.8DLC U-plane management procedures.22B.3.2.9Connection ciphering management procedures.22B.3.3Parameters.22B.3.3ALU1 Connection types.22B.4RL on DECT MAC layer.22B.4.1Capabilities.22B.4.1.1Services.22B.4.1.1.1Connection oriented control services.23B.4.1.1.2Broadcast control services.23B.4.1.1.3Multiplexing services.23B.4.1.1.4Management services.24B.4.1.2Procedures.24B.4.1.2.1Connection procedures.24B.4.1.2.1.1Connection setup procedures.24B.4.1.2.1.2Connection modification procedures.25B.4.1.2.1.3Connection release procedures.25B.4.1.2.2Broadcast procedures.25B.4.2Protocol parameters.25B.4.2.1Timer support.25B.4.2.2Channels supported.25B.4.2.3Bearer types supported.26B.4.2.4Slot types supported.26B.4.2.5Paging tail messages supported.26Annex C (normative):Profile specific ICS proforma for DECT FT IIP.27C.1Guidance for completing the profile specific proforma.27C.1.1Purposes and structure.27C.1.2Instructions for completing the Profile specific ICS.29C.2Identification of the implementation.29C.2.1Date of statement.29C.2.2Identification of the implementation.29C.2.3Contact person identification.29C.2.4Relationship with the System Conformance Statement (SCS).30C.3Identification of the profile.30C.3.1Defect report numbers and amendments implemented.30C.3.2Addenda implemented.30C.4Profile ICS proforma tables.31C.4.1Global statement of conformance.31C.4.2Profile ICS DECT NWK layer tables.31C.4.3Profile ICS DECT DLC layer tables.31C.4.4Profile ICS DECT MAC layer tables.32History.33SIST EN 301 241-2:2000
ETSIEN 301 241-2 V1.1.1 (1998-12)5Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respectof ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on theETSI Web server (http://www.etsi.org/ipr).Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guaranteecan be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Project Digital Enhanced CordlessTelecommunications (DECT).The present document is part 2 of a multi-part standard covering the DECT/ISDN interworking for intermediate systemconfiguration Profile Implementation Conformance Statement (ICS), as identified below:Part 1:"Portable radio Termination (PT)";Part 2:"Fixed radio Termination (FT)".National transposition datesDate of adoption of this EN:23 October 1998Date of latest announcement of this EN (doa):31 January 1999Date of latest publication of new National Standardor endorsement of this EN (dop/e):31 July 1999Date of withdrawal of any conflicting National Standard (dow):31 July 1999SIST EN 301 241-2:2000
ETSIEN 301 241-2 V1.1.1 (1998-12)61ScopeThe present document provides the Profile Implementation Conformance Statement (Profile ICS) proforma for theDECT/ISDN interworking for intermediate system configuration profile at the Fixed radio Termination (FT) as definedin ETS 300 822 [9] in compliance with the relevant requirements and in accordance with the relevant guidance given inISO/IEC 9646-7 [17].The supplier of an implementation which claims to conform to ETS 300 822 [9] is required to complete a copy of thePICS proforma ETS 300 476 parts 4 [12], 5 [13], 6 [14], and 7 [15], with the replacements provided by the RequirementLists (RLs) given in annex B of the present document, as well as a copy of the specific ICS proforma provided in theannex C of the present document.2ReferencesReferences may be made to:a)specific versions of publications (identified by date of publication, edition number, version number, etc.), inwhich case, subsequent revisions to the referenced document do not apply; orb)all versions up to and including the identified version (identified by "up to and including" before the versionidentity); orc)all versions subsequent to and including the identified version (identified by "onwards" following the versionidentity); ord)publications without mention of a specific version, in which case the latest version applies.A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the samenumber.2.1Normative references[1]EN 300 175-1: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI):Part 1: Overview".[2]EN 300 175-2: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 2: Physical layer (PHL)".[3]EN 300 175-3: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 3: Medium Access Control (MAC) layer".[4]EN 300 175-4: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 4: Data Link Control (DLC) layer".[5]EN 300 175-5: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 5: Network (NWK) layer".[6]EN 300 175-6: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 6: Identities and addressing".[7]EN 300 175-7: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 7: Security features".[8]EN 300 175-8: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 8: Speech coding and transmission".[9]ETS 300 822: "Digital Enhanced Cordless Telecommunications (DECT); Integrated ServicesDigital Network (ISDN); DECT/ISDN interworking for intermediate system configuration;Interworking and profile specification".SIST EN 301 241-2:2000
ETSIEN 301 241-2 V1.1.1 (1998-12)7[10]ETS 300 434-1: "Digital Enhanced Cordless Telecommunications (DECT) and Integrated ServicesDigital Network (ISDN); DECT/ISDN interworking for end system configuration; Part 1:Interworking specification".[11]ETS 300 434-2: "Digital Enhanced Cordless Telecommunications (DECT) and Integrated ServicesDigital Network (ISDN); DECT/ISDN interworking for end system configuration; Part 2: Accessprofile".[12]ETS 300 476-4: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface(CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 4: Network (NWK)layer - Fixed radio Termination (FT)".[13]ETS 300 476-5: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface(CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 5: Data LinkControl (DLC) layer - Fixed radio Termination (FT)".[14]ETS 300 476-6: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface(CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 6: Medium AccessControl (MAC) layer - Fixed radio Termination (FT)".[15]ETS 300 476-7: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface(CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 7: Physical layer".[16]ISO/IEC 9646-1: "Information technology; Open Systems Interconnection; Conformance testingmethodology and framework; Part 1: General concepts".[17]ISO/IEC 9646-7: "Information technology; Open Systems Interconnection; Conformance testingmethodology and framework; Part 7: Implementation Conformance Statements".[18]EN 300 403-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control; Part 1:Protocol specification [ITU-T Recommendation Q.931 (1993), modified]".[19]EN 300 403-3: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control; Part 3:Protocol Implementation Conformance Statement (PICS) proforma specification".[20]ETS 300 402-2: "Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Data link layer; Part 2: General protocol specification[ITU-T Recommendation Q.921 (1993), modified]".[21]ETS 300 402-4: "Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Data link layer; Part 4: Protocol Implementation ConformanceStatement (PICS) proforma specification for the general protocol".[22]ETS 300 011 (1992) including Amendment 2: "Integrated Services Digital Network (ISDN);Primary rate user-network interface; Layer 1 specification and test principles".[23]ETS 300 012 (1992) including Amendment 2: "Integrated Services Digital Network (ISDN); Basicuser-network interface; Layer 1 specification and test principles".2.2Informative references[24]ISO/IEC 9646-6: "Information technology; Open Systems Interconnection; Conformance testingmethodology and framework; Part 6: Protocol profile test specification".[25]ETS 300 406: "Methods for Testing and Specification (MTS); Protocol and profile conformancetesting specifications; Standardization methodology".SIST EN 301 241-2:2000
ETSIEN 301 241-2 V1.1.1 (1998-12)83Definitions and abbreviations3.1DefinitionsFor the purposes of the present document, the following terms and definitions apply:a)the terms defined in ISO/IEC 9646-7 [17];b)the definitions in ETS 300 434-1 [10] and ETS 300 434-2 [11]; andc)the following terms defined in ISO/IEC 9646-1 [16]:-PICS proforma;-Profile Implementation Conformance Statement (Profile ICS).3.2AbbreviationsFor the purposes of the present document, the following abbreviations apply:CCCall ControlC-planeControl planeDECTDigital Enhanced Cordless TelecommunicationsDLCData Link ControlFTFixed radio TerminationICSImplementation Conformance StatementIIPIntermediate ISDN access ProfileISDNIntegrated Services Digital NetworkLCELink Control EntityLLMELower Layer Management EntityMACMedium Access ControlMMMobility ManagementNWKNetworkPCTRProtocol Conformance Test ReportPHLPhysicalPICSProtocol Implementation Conformance StatementPPPortable PartPTPortable radio TerminationRLRequirements ListSCSSystem Conformance StatementSCTRSystem Conformance Test ReportTRUPTransparent Unprotected serviceU-planeUser planeSIST EN 301 241-2:2000
ETSIEN 301 241-2 V1.1.1 (1998-12)94Conformance requirement concerning Profile ICSThe supplier of a protocol implementation which is claimed to conform to the Fixed Termination specific requirementsof ETS 300 822 [9] and ETS 300 434-2 [11] shall:-verify that his protocol implementation meets the Profile RLs for each DECT protocol layer, contained inannex B of the present document;-complete a copy of the Profile specific ICS proforma provided in annex C;-complete a copy of the System Conformance Statement (SCS) proforma provided in annex A; and-provide the information necessary to identify both the supplier and the implementation.Table 1 provides guidance to indicate how to fulfil the PICS proforma required for the profile.Table 1: DECT PICS proforma tablePICSTablesChangeETS 300 476-4 [12]A.12Status column updated by RL subclause B.2.1A.13Status column updated by RL subclause B.2.2.1A.14Status column updated by RL subclause B.2.2.2A.16Status column updated by RL subclause B.2.2.3A.18Status column updated by RL subclause B.2.3.1A.19Status column updated by RL subclause B.2.3.2A.23Status column updated by RL subclause B.2.3.3A.24Status column updated by RL subclause B.2.3.4A.25 and A.26Status column updated by RL subclause B.2.4.1A.51 and A.52Status column updated by RL subclause B.2.4.2A.126 and A.127Status column updated by RL subclause B.2.4.3All other tablesUnchangedETS 300 476-5 [13]A.9Status column updated by RL subclause B.3.1.1A.10Status column updated by RL subclause B.3.1.2A.11Status column updated by RL subclause B.3.1.3A.12Status column updated by RL subclause B.3.1.4A.13Status column updated by RL subclause B.3.2.1A.16Status column updated by RL subclause B.3.2.2A.18Status column updated by RL subclause B.3.2.3A.19Status column updated by RL subclause B.3.2.4A.30Status column updated by RL subclause B.3.2.5A.31Status column updated by RL subclause B.3.2.6A.32Status column updated by RL subclause B.3.2.7A.33Status column updated by RL subclause B.3.2.8A.34Status column updated by RL subclause B.3.2.9A.40Status column updated by RL subclause B.3.3.1All other tablesUnchangedETS 300 476-6 [14],A.9Status column updated by RL subclause B.4.1.1A.10 to A.12 and A.14Status column updated by RL subclause B.4.1.1.1A.15Status column updated by RL subclause B.4.1.1.2A.19 to A.23Status column updated by RL subclause B.4.1.1.3A.24Status column updated by RL subclause B.4.1.1.4A.26 and A.29Status column updated by RL subclause B.4.1.2.1.1A.30Status column updated by RL subclause B.4.1.2.1.2A.33Status column updated by RL subclause B.4.1.2.1.3A.34Status column updated by RL subclause B.4.1.2.2A.41Status column updated by RL subclause B.4.2.1A.44Status column updated by RL subclause B.4.2.2A.45Status column updated by RL subclause B.4.2.3A.46Status column updated by RL subclause B.4.2.4A.58Status column updated by RL subclause B.4.2.5All other tablesUnchangedETS 300 476-7 [15]All tablesUnchangedSIST EN 301 241-2:2000
ETSIEN 301 241-2 V1.1.1 (1998-12)10Annex A (normative):System Conformance Statement (SCS) proforma for DECTFT IIPNotwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that usersof the present document may freely reproduce the SCS proforma in this annex so that it can be used for its intendedpurposes and may further publish the completed SCS.A.1IdentificationA.1.1Description of the systemTable A.1: Description of the systemProduct name:Hardware version number:Software version number:CPU type:Bus-system:Operating system name:Operating system version number:Additional:A.1.2Supplier of the systemTable A.2: Supplier of the systemCompany:Street:Postal code / city:Country:SIST EN 301 241-2:2000
ETSIEN 301 241-2 V1.1.1 (1998-12)11A.1.3Client identificationIf different from the supplier.Table A.3: Client identificationCompany:Street:Postal code / city:Country:A.1.4Contact person identificationTable A.4: Contact person identificationName:Telephone:Fax:Telex:E-mail:A.1.5Signature of the client or of the supplierTable A.5: Signature of the client or of the supplierName:Position:Signature:Date:SIST EN 301 241-2:2000
ETSIEN 301 241-2 V1.1.1 (1998-12)12A.2Protocol identificationThis table identifies the protocols that have to be supported. The PCTR reference column may be used to refer to anyPCTR that have been obtained for these protocols in this system.Table A.6: Protocol identificationItemProtocol nameSpecificationreferencePICSreferencePCTRreferencePr1ISDN L3 layerEN 300 403-1 [18]EN 300 403-3 [19]Pr2ISDN L2 layerETS 300 402-2 [20]ETS 300 402-4 [21]Pr3ISDN L1 layerETS 300 011 [22]ETS 300 012 [23]ETS 300 011/A2 [22]ETS 300 012/A2 [23]Pr4DECT NWK layerEN 300 175-5 [5]ETS 300 476-4 [12]Pr5DECT DLC layerEN 300 175-4 [4]ETS 300 476-5 [13]Pr6DECT MAC layerEN 300 175-3 [3]ETS 300 476-6 [14],Pr7DECT PH layerEN 300 175-2 [2]ETS 300 476-7 [15]A.3Profile identificationThis table identifies the profiles that have to be supported. The SCTR reference column may be used to refer to anySCTR that have been obtained for these profiles in this system.Table A.7: Profile identificationItemProfile identifierSpecificationreferenceProfile specific ICSreferenceSCTR referencePo1ISDN Intermediate SystemConfiguration Profile (IIP)ETS 300 822 [9]The present documentA.4Additional informationAny additional information which is relevant for the product may be given here (e.g. information that is needed forfurther certification: quality system used, available certificates, etc.).SIST EN 301 241-2:2000
ETSIEN 301 241-2 V1.1.1 (1998-12)13Annex B (normative):RLs for DECT PT IIPB.1GeneralThe supplier of a protocol implementation which is claimed to conform to the FT specific requirements ofETS 300 822 [9] shall verify that his particular (NWK, DLC, MAC and PHL) layer protocol implementation meets theProfile RL for this layer. For this, he shall complete a copy of the corresponding layer PICS proforma contained inannex A of ETS 300 476 parts 4 [12], 5 [13], 6 [14] and 7 [15] updated with the requirements from this annex.B.1AProfile RLThe Profile RL for the NWK, DLC, MAC and PHL layers as defined in this annex is based on ETS 300 476 parts4 [12], 5 [13], 6 [14] and 7 [15]. For every capability listed in ETS 300 476 parts 4 [12], 5 [13], 6 [14] and 7 [15], theprofile requirements are expressed by restriction upon allowed support answers in E
...