SIST EN 302 500-2 V1.2.1:2008
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) using Ultra WideBand (UWB) technology - Location Tracking equipment operating in the frequency range from 6 GHz to 8,5 GHz - Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
- Abstract
The present document defines the requirements for radio frequency usage for Ultra Wide Band (UWB) location tracking devices. These devices operate in the frequency range from 6 GHz to 9 GHz and use a fixed infrastructure. It covers Ultra Wide Band location tracking tags which are attached to people or objects and are tracked using a fixed infrastructure. Operation is mainly indoors. Outdoor usage is only allowed under an adequate national licensing scheme.
- Status
- Published
- Publication Date
- 26-Aug-2008
- Technical Committee
- MOC - Mobile Communications
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 11-Aug-2008
- Due Date
- 16-Oct-2008
- Completion Date
- 27-Aug-2008
Buy Documents
ETSI EN 302 500-2 V1.2.1 (2008-04) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from 6 GHz to 8,5 GHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
ETSI EN 302 500-2 V1.2.1 (2008-06) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from 6 GHz to 8,5 GHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
SIST EN 302 500-2 V1.2.1:2008 is the Slovenian adoption of ETSI EN 302 500-2 V1.2.1, a Harmonized European Standard for Ultra WideBand (UWB) location tracking equipment. It specifies the radio-frequency requirements and test approach used to show compliance with Article 3.2 of the R&TTE Directive, mainly for manufacturers, test labs, and compliance teams. The equipment covered is UWB location tracking tags and fixed receiver infrastructure operating in the 6 GHz to 8.5 GHz range.
What does SIST EN 302 500-2 V1.2.1:2008 specify?
SIST EN 302 500-2 V1.2.1:2008 sets the spectrum-use requirements for UWB location tracking equipment and organizes them into requirements, tests, and a harmonized requirements table. It is part 2 of a multi-part deliverable, with Part 1 providing the technical characteristics and test methods.
The scope covers tags attached to people or objects and tracked by fixed receiver infrastructure. The document applies to indoor use and to portable or mobile outdoor applications; outdoor use is tied to an adequate national licensing scheme. Equipment is fitted with an integral or dedicated antenna.
| Annex | What it covers |
|---|---|
| Annex A | HS Requirements and conformance Test specifications Table (HS-RTT) |
| Annex B | EN title in the official languages |
| Annex C | Bibliography |
What are the key requirements of SIST EN 302 500-2 V1.2.1:2008?
SIST EN 302 500-2 V1.2.1:2008 focuses on emissions, receiver spurious radiation, and the way compliance is demonstrated. In practice, it tells a provider what to declare, what to measure, and which tests are part of the essential radio test suite.
Environmental profile and applicability
Clause 4.1 requires the provider to declare the operational environmental profile, and the equipment has to comply within those boundary limits. This means the claimed operating conditions matter before testing starts, because the results are only meaningful for the declared environment.
Transmitter limits
Clauses 4.2.1.1, 4.2.1.2, and 4.2.1.3 control the maximum mean equivalent isotropically radiated power (e.i.r.p.) spectral density, the frequency of the highest maximum mean e.i.r.p. spectral density, and the maximum peak e.i.r.p. These requirements keep the transmitter energy inside the allowed spectrum envelope.
Clause 4.2.1.4 sets a minimum Pulse Repetition Frequency (PRF) for transmitters using impulsive UWB signals. For a designer, this matters because the pulse timing is part of the radio behavior that must remain within the approved limits.
Receiver limits and design provisions
Clause 4.2.2.1 limits receiver spurious radiations. Clause 4.3 adds design requirements taken from Annex C of EN 302 500-1, so compliance is not only about measured emissions but also about how the equipment is designed.
Testing and compliance evidence
Clause 5 links each requirement to a test procedure and says testing shall be carried out at representative points within the declared environmental profile. Clauses 5.2.1 and 5.2.2 define the essential transmitter and receiver test suites, and clause 5.3 uses the measurement-result interpretation from EN 302 500-1. Annex A then cross-references each requirement to its test status, including whether it is unconditional or conditional.
What terms does SIST EN 302 500-2 V1.2.1:2008 define?
Ultra WideBand (UWB) is the radio technology used by the equipment covered by this standard.
Short Range Devices (SRD) are the class of devices to which the document belongs.
equivalent isotropically radiated power (e.i.r.p.) is the antenna-related power measure used for transmitter limits and testing.
Pulse Repetition Frequency (PRF) is the rate at which impulses repeat in impulsive UWB transmitters.
R&TTE Directive is the European directive whose Article 3.2 is addressed by this standard.
HS-RTT means Harmonized Standard Requirements and conformance Test specifications Table, the cross-reference table in Annex A.
Who uses SIST EN 302 500-2 V1.2.1:2008?
SIST EN 302 500-2 V1.2.1:2008 is used by manufacturers of UWB location tracking tags and associated receiver systems, especially when the products use fixed infrastructure. It is also used by test laboratories that measure emissions and receiver spurious radiations, and by regulatory or quality teams that need a structured route to document conformity with Article 3.2.
Which standards are used with SIST EN 302 500-2 V1.2.1:2008?
| Reference | What it contributes |
|---|---|
| ETSI EN 302 500-1 (V1.2.1) | Technical characteristics, test methods, limits, definitions, symbols, abbreviations, measurement interpretation, and referenced clauses used throughout Part 2 |
| Directive 1999/5/EC | The R&TTE Directive whose Article 3.2 is the regulatory basis for this Harmonized Standard |
| Directive 98/34/EC | The procedural directive mentioned in the foreword for the standardization mandate |
| ECC/DEC/(06)04 | Bibliographic context on harmonized conditions for UWB devices below 10.6 GHz |
| ETSI TR 102 495-3 | Background on UWB location tracking applications type 1 in the 6 GHz to 9 GHz band |
What does the SIST EN 302 500-2 V1.2.1:2008 document contain?
The document contains the scope, references, definitions, technical requirements, and compliance testing structure for UWB location tracking equipment. Clause 4 covers environmental profile, transmitter requirements, receiver requirements, and design requirements.
Clause 5 gives the environmental conditions for testing, the essential radio test suites, and the interpretation of measurement results. Annex A provides the HS-RTT table that links each requirement to its test specification and compliance status. Annexes B and C provide the official-language titles and bibliographic references.
Relations
- Effective Date
- 06-Jan-2010
Buy Documents
ETSI EN 302 500-2 V1.2.1 (2008-04) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from 6 GHz to 8,5 GHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
ETSI EN 302 500-2 V1.2.1 (2008-06) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from 6 GHz to 8,5 GHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 302 500-2 V1.2.1:2008 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) using Ultra WideBand (UWB) technology - Location Tracking equipment operating in the frequency range from 6 GHz to 8,5 GHz - Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive". This standard covers: The present document defines the requirements for radio frequency usage for Ultra Wide Band (UWB) location tracking devices. These devices operate in the frequency range from 6 GHz to 9 GHz and use a fixed infrastructure. It covers Ultra Wide Band location tracking tags which are attached to people or objects and are tracked using a fixed infrastructure. Operation is mainly indoors. Outdoor usage is only allowed under an adequate national licensing scheme.
The present document defines the requirements for radio frequency usage for Ultra Wide Band (UWB) location tracking devices. These devices operate in the frequency range from 6 GHz to 9 GHz and use a fixed infrastructure. It covers Ultra Wide Band location tracking tags which are attached to people or objects and are tracked using a fixed infrastructure. Operation is mainly indoors. Outdoor usage is only allowed under an adequate national licensing scheme.
SIST EN 302 500-2 V1.2.1:2008 is classified under the following ICS (International Classification for Standards) categories: 33.060.20 - Receiving and transmitting equipment; 33.100.01 - Electromagnetic compatibility in general. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 302 500-2 V1.2.1:2008 has the following relationships with other standards: It is inter standard links to SIST EN 302 500-2 V1.1.1:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 302 500-2 V1.2.1:2008 is associated with the following European legislation: EU Directives/Regulations: 1999/5/EC, TRRTP124; Standardization Mandates: M/329, M/407. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 302 500-2 V1.2.1:2008 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
Final draft ETSI EN 302 500-2 V1.2.1 (2008-04)
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices (SRD) using
Ultra WideBand (UWB) technology;
Location Tracking equipment operating in
the frequency range from 6 GHz to 8,5 GHz;
Part 2: Harmonized EN covering essential requirements
of article 3.2 of the R&TTE Directive
2 Final draft ETSI EN 302 500-2 V1.2.1 (2008-04)
Reference
REN/ERM-TG31C-257-2
Keywords
radio, regulation, SRD, testing, UWB
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 Final draft ETSI EN 302 500-2 V1.2.1 (2008-04)
Contents
Intellectual Property Rights.4
Foreword.4
1 Scope.5
2 References.5
2.1 Normative references.5
2.2 Informative references.6
3 Definitions, symbols and abbreviations .6
3.1 Definitions.6
3.2 Symbols.6
3.3 Abbreviations.6
4 Technical requirements specifications .6
4.1 Environmental profile.6
4.2 Conformance requirements.6
4.2.1 Transmitter requirements.6
4.2.1.1 Maximum mean equivalent isotropically radiated power spectral density.6
4.2.1.2 Frequency of highest maximum mean e.i.r.p. spectral density .6
4.2.1.3 Maximum peak equivalent isotropically radiated power .7
4.2.1.4 Minimum Pulse Repetition Frequency (PRF) .7
4.2.2 Receiver requirements.7
4.2.2.1 Maximum receiver spurious radiations .7
4.3 Design requirements.7
5 Testing for compliance with technical requirements.7
5.1 Environmental conditions for testing .7
5.2 Essential radio test suites.7
5.2.1 Transmitter test suites .7
5.2.1.1 Maximum mean e.i.r.p. spectral density .7
5.2.1.2 Frequency of highest maximum mean e.i.r.p. spectral density .7
5.2.1.3 Maximum peak e.i.r.p. .7
5.2.2 Receiver test suites.8
5.2.2.1 Receiver spurious radiations .8
5.3 Interpretation of measurement results .8
Annex A (normative): HS Requirements and conformance Test specifications Table (HS-
RTT).9
Annex B (informative): The EN title in the official languages .11
Annex C (informative): Bibliography.13
History .14
ETSI
4 Final draft ETSI EN 302 500-2 V1.2.1 (2008-04)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the Vote phase of the
ETSI standards Two-step Approval Procedure.
The present document is part 2 of a multi-part deliverable covering Short Range Devices (SRD) using
Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from
6 GHz to 8,5 GHz, as identified below:
Part 1: "Technical characteristics and test methods";
Part 2: "Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive".
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [2] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC of the European Parliament and of
the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive") [3].
Technical specifications relevant to Directive 1999/5/EC [3] are given in annex A.
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
ETSI
5 Final draft ETSI EN 302 500-2 V1.2.1 (2008-04)
1 Scope
The present document specifies the requirements for ultra-wideband Location Tracking equipment operating in all or
part of the frequency range from 6 GHz to 8,5 GHz.
The present document applies for indoor as well as portable or mobile outdoor applications.
It covers ultra-wideband location tracking tags which are attached to people or objects and are tracked using a fixed
receiver infrastructure to only receive the UWB emission by the tags. Equipment covered by the present document is
fitted with an integral or dedicated antenna.
The present document is intended to cover the provisions of Article 3.2 of Directive 1999/5/EC (R&TTE Directive) [3],
which states that ". radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably,
the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the
reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the
method of access to the referenced document and the full network address, with the same punctuation and use of upper
case and lower case letters.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only
the edition cited applies. For non-specific references, the latest edition of the referenced document (including any
amendments) applies.
[1] ETSI EN 302 500-1 (V1.2.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking
equipment operating in the frequency range from 6 GHz to 8,5 GHz; Part 1: Technical
characteristics and test methods".
ETSI
6 Final draft ETSI EN 302 500-2 V1.2.1 (2008-04)
2.2 Informative references
The following referenced documents are not essential to the use of the ETSI deliverable but they assist the user with
regard to a particular subject area. For non-specific references, the latest version of the referenced document (including
any amendments) applies.
[2] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a
procedure for the provision of information in the field of technical standards and regulations.
[3] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in the R&TTE Directive [3] and
EN 302 500-1 [1] apply.
3.2 Symbols
For the purposes of the present document, the symbols given in EN 302 500-1 [1] apply.
3.3 Abbreviations
For the purposes of the present document, the abbreviations given in EN 302 500-1 [1] apply.
4 Technical requirements specifications
4.1 Environmental profile
The technical requirements of the present document apply under the environmental profile for operation of the
equipment, which shall be declared by the provider. The equipment shall comply with all the technical requirements of
the present document at all times when operating within the boundary limits of the declared oper
...
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices (SRD) using
Ultra WideBand (UWB) technology;
Location Tracking equipment operating in
the frequency range from 6 GHz to 8,5 GHz;
Part 2: Harmonized EN covering essential requirements
of article 3.2 of the R&TTE Directive
2 ETSI EN 302 500-2 V1.2.1 (2008-06)
Reference
REN/ERM-TG31C-257-2
Keywords
radio, regulation, SRD, testing, UWB
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 ETSI EN 302 500-2 V1.2.1 (2008-06)
Contents
Intellectual Property Rights.4
Foreword.4
1 Scope.5
2 References.5
2.1 Normative references.5
2.2 Informative references.6
3 Definitions, symbols and abbreviations .6
3.1 Definitions.6
3.2 Symbols.6
3.3 Abbreviations.6
4 Technical requirements specifications .6
4.1 Environmental profile.6
4.2 Conformance requirements.6
4.2.1 Transmitter requirements.6
4.2.1.1 Maximum mean equivalent isotropically radiated power spectral density.6
4.2.1.2 Frequency of highest maximum mean e.i.r.p. spectral density .6
4.2.1.3 Maximum peak equivalent isotropically radiated power .7
4.2.1.4 Minimum Pulse Repetition Frequency (PRF) .7
4.2.2 Receiver requirements.7
4.2.2.1 Maximum receiver spurious radiations .7
4.3 Design requirements.7
5 Testing for compliance with technical requirements.7
5.1 Environmental conditions for testing .7
5.2 Essential radio test suites.7
5.2.1 Transmitter test suites .7
5.2.1.1 Maximum mean e.i.r.p. spectral density .7
5.2.1.2 Frequency of highest maximum mean e.i.r.p. spectral density .7
5.2.1.3 Maximum peak e.i.r.p. .7
5.2.2 Receiver test suites.8
5.2.2.1 Receiver spurious radiations .8
5.3 Interpretation of measurement results .8
Annex A (normative): HS Requirements and conformance Test specifications Table (HS-
RTT).9
Annex B (informative): The EN title in the official languages .11
Annex C (informative): Bibliography.13
History .14
ETSI
4 ETSI EN 302 500-2 V1.2.1 (2008-06)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document is part 2 of a multi-part deliverable covering Short Range Devices (SRD) using
Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from
6 GHz to 8,5 GHz, as identified below:
Part 1: "Technical characteristics and test methods";
Part 2: "Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive".
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.1] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC of the European Parliament and of
the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive") [i.2].
Technical specifications relevant to Directive 1999/5/EC [i.2] are given in annex A.
National transposition dates
Date of adoption of this EN: 27 June 2008
Date of latest announcement of this EN (doa): 30 September 2008
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 March 2009
Date of withdrawal of any conflicting National Standard (dow): 31 March 2010
ETSI
5 ETSI EN 302 500-2 V1.2.1 (2008-06)
1 Scope
The present document specifies the requirements for ultra-wideband Location Tracking equipment operating in all or
part of the frequency range from 6 GHz to 8,5 GHz.
The present document applies for indoor as well as portable or mobile outdoor applications.
It covers ultra-wideband location tracking tags which are attached to people or objects and are tracked using a fixed
receiver infrastructure to only receive the UWB emission by the tags. Equipment covered by the present document is
fitted with an integral or dedicated antenna.
The present document is intended to cover the provisions of Article 3.2 of Directive 1999/5/EC (R&TTE Directive)
[i.2], which states that ". radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably,
the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the
reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the
method of access to the referenced document and the full network address, with the same punctuation and use of upper
case and lower case letters.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only
the edition cited applies. For non-specific references, the latest edition of the referenced document (including any
amendments) applies.
[1] ETSI EN 302 500-1 (V1.2.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking
equipment operating in the frequency range from 6 GHz to 8,5 GHz; Part 1: Technical
characteristics and test methods".
ETSI
6 ETSI EN 302 500-2 V1.2.1 (2008-06)
2.2 Informative references
The following referenced documents are not essential to the use of the ETSI deliverable but they assist the user with
regard to a particular subject area. For non-specific references, the latest version of the referenced document (including
any amendments) applies.
[i.1] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a
procedure for the provision of information in the field of technical standards and regulations.
[i.2] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in the R&TTE Directive [i.2] and
EN 302 500-1 [1] apply.
3.2 Symbols
For the purposes of the present document, the symbols given in EN 302 500-1 [1] apply.
3.3 Abbreviations
For the purposes of the present document, the abbreviations given in EN 302 500-1 [1] apply.
4 Technical requirements specifications
4.1 Environmental profile
The technical requirements of the present document apply under the environmental profile for operation of the
equipment, which shall be declared by the provider. The equipment shall comply with all the technical requirements of
the present document at all times when operating within the boundary limits of the declared operational environmental
profile.
4.2 Conformance requirements
4.2.1 Transmitter requirements
4.2.1.1 Maximum mean equivalent isotropically radiated power spectral density
The maximum mean equivalent isotropically radiated power (e.i.r.p.) spectral density shall not exceed the limits
specified in clause 8.2.3 of EN 302 500-1 [1].
4.2.1.2 Frequency of highest maximum mean e.i.r.p. spectral density
The frequency of the highest max
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.577(Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) using Ultra WideBand (UWB) technology - Location Tracking equipment operating in the frequency range from 6 GHz to 8,5 GHz - Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:EN 302 500-2 Version 1.2.1SIST EN 302 500-2 V1.2.1:2008en01-oktober-2008SIST EN 302 500-2 V1.2.1:2008SLOVENSKI
STANDARD
ETSI ETSI EN 302 500-2 V1.2.1 (2008-06) 2
Reference REN/ERM-TG31C-257-2 Keywords radio, regulation, SRD, testing, UWB ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2008. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. SIST EN 302 500-2 V1.2.1:2008
ETSI ETSI EN 302 500-2 V1.2.1 (2008-06) 3
Contents Intellectual Property Rights.4 Foreword.4 1 Scope.5 2 References.5 2.1 Normative references.5 2.2 Informative references.6 3 Definitions, symbols and abbreviations.6 3.1 Definitions.6 3.2 Symbols.6 3.3 Abbreviations.6 4 Technical requirements specifications.6 4.1 Environmental profile.6 4.2 Conformance requirements.6 4.2.1 Transmitter requirements.6 4.2.1.1 Maximum mean equivalent isotropically radiated power spectral density.6 4.2.1.2 Frequency of highest maximum mean e.i.r.p. spectral density.6 4.2.1.3 Maximum peak equivalent isotropically radiated power.7 4.2.1.4 Minimum Pulse Repetition Frequency (PRF).7 4.2.2 Receiver requirements.7 4.2.2.1 Maximum receiver spurious radiations.7 4.3 Design requirements.7 5 Testing for compliance with technical requirements.7 5.1 Environmental conditions for testing.7 5.2 Essential radio test suites.7 5.2.1 Transmitter test suites.7 5.2.1.1 Maximum mean e.i.r.p. spectral density.7 5.2.1.2 Frequency of highest maximum mean e.i.r.p. spectral density.7 5.2.1.3 Maximum peak e.i.r.p.7 5.2.2 Receiver test suites.8 5.2.2.1 Receiver spurious radiations.8 5.3 Interpretation of measurement results.8 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT).9 Annex B (informative): The EN title in the official languages.11 Annex C (informative): Bibliography.13 History.14
ETSI ETSI EN 302 500-2 V1.2.1 (2008-06) 4
Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document is part 2 of a multi-part deliverable covering Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from 6 GHz to 8,5 GHz, as identified below: Part 1: "Technical characteristics and test methods"; Part 2: "Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive". The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [i.1] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive") [i.2]. Technical specifications relevant to Directive 1999/5/EC [i.2] are given in annex A.
National transposition dates Date of adoption of this EN: 27 June 2008 Date of latest announcement of this EN (doa): 30 September 2008 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 March 2009 Date of withdrawal of any conflicting National Standard (dow): 31 March 2010
ETSI ETSI EN 302 500-2 V1.2.1 (2008-06) 5
1 Scope The present document specifies the requirements for ultra-wideband Location Tracking equipment operating in all or part of the frequency range from 6 GHz to 8,5 GHz. The present document applies for indoor as well as portable or mobile outdoor applications. It covers ultra-wideband location tracking tags which are attached to people or objects and are tracked using a fixed receiver infrastructure to only receive the UWB emission by the tags. Equipment covered by the present document is fitted with an integral or dedicated antenna. The present document is intended to cover the provisions of Article 3.2 of Directive 1999/5/EC (R&TTE Directive) [i.2], which states that ". radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. • For a specific reference, subsequent revisions do not apply. • Non-specific reference may be made only to a complete document or a part thereof and only in the following cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the purposes of the referring document;
- for informative references. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably, the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the method of access to the referenced document and the full network address, with the same punctuation and use of upper case and lower case letters. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. [1] ETSI EN 302 500-1 (V1.2.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from 6 GHz to 8,5 GHz; Part 1: Technical characteristics and test methods". SIST EN 302 500-2 V1.2.1:2008
ETSI ETSI EN 302 500-2 V1.2.1 (2008-06) 6
2.2 Informative references The following referenced documents are not essential to the use of the ETSI deliverable but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) applies. [i.1] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations. [i.2] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (R&TTE Directive). 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in the R&TTE Directive [i.2] and EN 302 500-1 [1] apply. 3.2 Symbols For the purposes of the present document, the symbols given in EN 302 500-1 [1] apply. 3.3 Abbreviations For the purposes of the present document, the abbreviations given in EN 302 500-1 [1] apply. 4 Technical requirements specifications 4.1 Environmental profile The technical requirements of the present document apply under the environmental profile for operation of the equipment, which shall be declared by the provider. The equipment shall comply with all the technical requirements of the present document at all times when operating
...