iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 14081-2:2010/kFprA1:2012

(Amendment)

Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading - Additional requirements for initial type testing

Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading - Additional requirements for initial type testing

This European Standard specifies requirements , additional to those in EN 14081-1, for initial type testing of machine graded structural timber with rectangular cross sections shaped by sawing, planing or other methods, and having deviations from the target sires corresponding to EN336.This includes requiremnts for strength grading machines and test equipment for proof loading graded material.

Holzbauwerke - Nach Festigkeit sortiertes Bauholz für tragende Zwecke mit rechteckigem Querschnitt - Teil 2: Maschinelle Sortierung - Zusätzliche Anforderungen an die Erstprüfung

Structures en bois - Bois de structure de section rectangulaire classé selon la résistance - Partie 2 : Classement mécanique - Exigences supplémentaires concernant les essais de type initiaux

Lesene konstrukcije - Razvrščanje konstrukcijskega lesa pravokotnega prečnega prereza po trdnosti - 2. del: Strojno razvrščanje - Dodatne zahteve za začetni preskus proizvodnje

General Information

Status
Not Published
Public Enquiry End Date
04-Sep-2012
ICS
79.040 - Wood, sawlogs and sawn timber
91.080.20 - Timber structures
Technical Committee
KON.005 - Timber structures
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
11-Jun-2014
Due Date
16-Jun-2014
Completion Date
11-Jun-2014
Directive
89/106/EEC - Construction products
Mandate
M/112 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on structural timber products
Ref Project
EN 14081-2:2010/FprA1 - Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading - Additional requirements for initial type testing

Relations

Consolidated By
SIST EN 14081-2:2011+A1:2013 - Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for initial type testing
Effective Date
18-Jan-2023
Consolidated By
SIST EN 14081-2:2011+A1:2013 - Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for initial type testing
Effective Date
19-Jan-2023

Buy Standard

EN 14081-2:2010/kFprA1:2012EN 14081-2:2010/kFprA1:2012
PreviousNext
Draft
EN 14081-2:2010/kFprA1:2012
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14081-2:2010/kFprA1:2012
01-september-2012
/HVHQHNRQVWUXNFLMH5D]YUãþDQMHNRQVWUXNFLMVNHJDOHVDSUDYRNRWQHJDSUHþQHJD
SUHUH]DSRWUGQRVWLGHO6WURMQRUD]YUãþDQMH'RGDWQH]DKWHYH]D]DþHWQL
SUHVNXVSURL]YRGQMH
Timber structures - Strength graded structural timber with rectangular cross section -
Part 2: Machine grading - Additional requirements for initial type testing
Holzbauwerke - Nach Festigkeit sortiertes Bauholz für tragende Zwecke mit
rechteckigem Querschnitt - Teil 2: Maschinelle Sortierung - Zusätzliche Anforderungen
an die Erstprüfung
Structures en bois - Bois de structure de section rectangulaire classé selon la résistance
- Partie 2 : Classement mécanique - Exigences supplémentaires concernant les essais
de type initiaux
Ta slovenski standard je istoveten z: EN 14081-2:2010/FprA1
ICS:
79.040 Les, hlodovina in žagan les Wood, sawlogs and sawn
timber
91.080.20 Lesene konstrukcije Timber structures
SIST EN 14081-2:2010/kFprA1:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14081-2:2010/kFprA1:2012

---------------------- Page: 2 ----------------------

SIST EN 14081-2:2010/kFprA1:2012


EUROPEAN STANDARD
FINAL DRAFT
EN 14081-2:2010
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
June 2012
ICS 79.040
English Version
Timber structures - Strength graded structural timber with
rectangular cross section - Part 2: Machine grading - Additional
requirements for initial type testing
Structures en bois - Bois de structure de section Holzbauwerke - Nach Festigkeit sortiertes Bauholz für
rectangulaire classé selon la résistance - Partie 2 :
tragende Zwecke mit rechteckigem Querschnitt - Teil 2:
Classement mécanique - Exigences supplémentaires Maschinelle Sortierung - Zusätzliche Anforderungen an die
concernant les essais de type initiaux Erstprüfung
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 124.

This draft amendment A1, if approved, will modify the European Standard EN 14081-2:2010. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the natio
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 14081-2:2018+A1:2022(Main)
Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for type testing
EN 14081-2:2018+A1:2022

This document specifies requirements, additional to those of EN 14081-1, for type testing of machine graded structural timber with rectangular cross-sections shaped by sawing, planning or other methods, and having deviations from the target sizes corresponding to EN 336. This includes requirements for strength grading machines.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 384:2016+A2:2022(Main)
Structural timber - Determination of characteristic values of mechanical properties and density
EN 384:2016+A2:2022

This European Standard gives a method for determining characteristic values of mechanical properties and density, for defined populations of visual grades and/or strength classes of machine graded structural timber. Additionally it covers the stages of sampling, testing, analysis and presentation of the data.
The standard provides methods to derive strength, stiffness and density properties for structural timber from tests with defect-free specimen.
The values determined in accordance with this standard for mechanical properties and density are suitable for assigning grades and species to the strength classes of EN 338.
NOTE 1   For assigning grades and species to the strength classes in EN 338 only three properties, i.e. bending or tension strength, modulus of elasticity parallel to grain in bending or tension and density need to be determined from test data, other properties can be calculated according to Table 2.
NOTE 2   EN 1912 gives examples of established visual grades assigned to strength classes.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14081-3:2022(Main)
Timber structures - Strength graded structural timber with rectangular cross section - Part 3: Machine grading; additional requirements for factory production control
EN 14081-3:2022

This document specifies requirements additional to those given in EN 14081-1 for factory production control of machine graded structural timber with rectangular cross-sections shaped by sawing, planing or other methods, and having deviations from the target sizes corresponding to EN 336.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14081-1:2016+A1:2019(Main)
Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements
EN 14081-1:2016+A1:2019

This European Standard specifies requirements for strength graded structural timber with rectangular cross-sections either visual or machine graded, shaped by sawing, planning or other methods and with cross-sectional dimensions complying with EN 336 (referred to as structural timber in the following clauses).
This European Standard includes provisions for test methods, Assessment and Verification of Constancy of Performance and marking of structural timber.
NOTE 1   For machine strength graded timber additional provisions for type testing (TT) are given in EN 14081-2 and for factory production control (FPC) in EN 14081-3.
NOTE 2   An acceptance procedure for verification of a lot is given in EN 14358 which may be used for a delivery of structural timber.
This European Standard identifies characteristics for which limits have to be given in visual grading standards.
This European Standard covers structural timber, untreated or treated against biological attack.
This European Standard does not cover:
-   timber treated by fire retardant products to improve its fire performance;
-   thermally and/or chemically modified timber;
-   structural finger jointed timber.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 408:2010+A1:2012(Main)
Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties
EN 408:2010+A1:2012

This European Standard specifies test methods for determining the following properties of structural timber and glued laminated timber: modulus of elasticity in bending; shear modulus; bending strength; modulus of elasticity in tension parallel to the grain; tension strength parallel to the grain; modulus of elasticity in compression parallel to the grain; compression strength parallel to the grain; modulus of elasticity in tension perpendicular to the grain; tension strength perpendicular to the grain; modulus of elasticity in compression perpendicular to the grain; compression strength perpendicular to the grain and shear strength.
In addition, the determination of dimensions, moisture content, and density of test pieces are specified.
The methods apply to rectangular and circular shapes (of substantially constant cross section) of solid unjointed timber or finger-jointed timber and glued laminated timber unless stated otherwise.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 408:2010/kFprA1:2012(Amendment)
Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties.
EN 408:2010/FprA1

This European Standard specifies test methods for determining the following properties of structural timber and glued laminated timber: modulus of elasticity in bending; shear modulus; bending strength, modulus of elasticity in tension and tension strength parallel to the grain; modulus of elasticity in compression and compression strength parallel to the grain; modulus of elasticity in tension and tension strength perpendicular to the grain; modulus of elasticity in compression and compression strength perpendicular to the grain; and shear strength.

  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14081-3:2012/kprA1:2017(Amendment)
Timber structures - Strength graded structural timber with rectangular cross section - Part 3: Machine grading; additional requirements for factory production control
EN 14081-3:2012/FprA1

This European Standard specifies requirements additional to those given in EN 14081-1 for factory production control of machine graded structural timber with rectangular cross-sections shaped by sawing, planing or other methods, and having deviations from the target sizes corresponding to EN 336.

  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 384:2016+A1:2019/kprA2:2022(Amendment)
Structural timber - Determination of characteristic values of mechanical properties and density
EN 384:2016+A1:2018/FprA2

This European Standard gives a method for determining characteristic values of mechanical properties and density, for defined populations of visual grades and/or strength classes of machine graded structural timber. Additionally it covers the stages of sampling, testing, analysis and presentation of the data.
The standard provides methods to derive strength, stiffness and density properties for structural timber from tests with defect-free specimen.
The values determined in accordance with this standard for mechanical properties and density are suitable for assigning grades and species to the strength classes of EN 338.
NOTE 1   For assigning grades and species to the strength classes in EN 338 only three properties, i.e. bending or tension strength, modulus of elasticity parallel to grain in bending or tension and density need to be determined from test data, other properties can be calculated according to Table 2.
NOTE 2   EN 1912 gives examples of established visual grades assigned to strength classes.

  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14081-2:2018/kprA1:2022(Amendment)
Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for type testing
EN 14081-2:2018/FprA1

This document specifies requirements, additional to those of EN 14081-1, for type testing of machine graded structural timber with rectangular cross-sections shaped by sawing, planning or other methods, and having deviations from the target sizes corresponding to EN 336. This includes requirements for strength grading machines.

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 14081-1:2012(Main)
Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements
prEN 14081-1 rev

This European Standard specifies the requirements for visual and machine graded structural timber with rectangular cross-sections shaped by sawing, planning or other methods, and having deviations from the target sizes corresponding to EN336.
This European Standard consists of provisions for tests methods, evaluation of conformity ( ITTand FPC) and marking of both grading types of structural timber.

  • Draft
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day