SIST EN 10223-4:2013
(Main)Steel wire and wire products for fences - Part 4: Steel wire welded mesh fencing
Steel wire and wire products for fences - Part 4: Steel wire welded mesh fencing
This European Standard specifies requirements for steel wire welded mesh fencing of which there are many types for a variety of applications. It specifies the general characteristics of welded mesh fencing supplied as rolls or panels and coatings, properties and tolerances. This European Standard covers only orthogonal welded mesh i.e. wire welded at right angles to one another. For welded mesh fencing made from panels the specification covers only panels made from wires not greater than 10 mm.
Stahldraht und Erzeugnisse aus Stahldraht für Zäune - Teil 4: Geschweiβte Gitter aus Stahldraht für Zäune
Diese Europäische Norm legt Anforderungen an geschweißte Gitter aus Stahldraht für Zäune fest, von denen
zahlreiche Ausführungen für viele verschiedene Anwendungen bekannt sind. Sie legt für geschweißte Gitter,
die als Rollen oder Elemente geliefert werden, die allgemeinen Kenndaten sowie Überzüge, Eigenschaften
und Toleranzen fest.
Diese Europäische Norm gilt nur für rechtwinklig geschweißte Gitter, d. h. für Maschengeflechte aus Drähten,
die im rechten Winkel zueinander verschweißt wurden.
Bei geschweißten Gittern in Form von Elementen werden nur die Elemente festgelegt, die aus Drähten mit
einem Durchmesser bis 10 mm bestehen.
Fils et produits tréfilés en acier pour clôtures - Partie 4: Grillage en acier soudé
La présente Norme européenne spécifie les prescriptions relatives au grillage en acier soudé, dont il existe de nombreux types différents, utilisés dans un grand nombre d’applications. Elle spécifie les caractéristiques générales du grillage en acier soudé, livré en rouleaux ou en panneaux, ainsi que les revêtements, caractéristiques et tolérances recommandés. La norme européenne ne concerne que les grillages en acier soudés à mailles orthogonales, c’est-à-dire à angle droit les unes des autres. En ce qui concerne les grillages en acier soudés en panneaux, les spécifications ne s’appliquent qu’aux panneaux réalisés en fil de section inférieure ou égale à 10 mm.
Jeklena žica in žični izdelki za ograje - 4. del: Varjene mrežne ograje iz jeklene žice
Ta evropski standard določa zahteve za več vrst varjenih mrežnih ograj iz jeklene žice, ki se uporabljajo za različne namene. Določa splošne značilnosti varjene mrežne ograje, oblikovane v zvitke ali plošče, ter prevlek, lastnosti in tolerance. Ta evropski standard velja samo za pravokotno varjeno mrežo, na primer žico, ki je varjena na drugo pod pravim kotom. Pri varjenih mrežnih ograjah, ki so narejene iz plošč, specifikacija zajema le plošče iz žice, ki so tanjše od 10 mm.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fils et produits tréfilés en acier pour clôtures - Partie 4: Grillage en acier soudéSteel wire and wire products for fences - Part 4: Steel wire welded mesh fencing91.090Konstrukcije zunaj stavbExternal structures77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chainsICS:Ta slovenski standard je istoveten z:EN 10223-4:2012SIST EN 10223-4:2013en,fr,de01-marec-2013SIST EN 10223-4:2013SLOVENSKI
STANDARDSIST EN 10223-4:20001DGRPHãþD
SIST EN 10223-4:2013
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10223-4
November 2012 ICS 77.140.65 Supersedes EN 10223-4:1998English Version
Steel wire and wire products for fencing and netting - Part 4: Steel wire welded mesh fencing
Fils et produits tréfilés en acier pour clôtures et grillages - Partie 4: Grillage en acier soudé
Stahldraht und Drahterzeugnisse für Zäune und Drahtgeflechte - Teil 4: Geschweißte Gitter aus Stahldraht für Zäune This European Standard was approved by CEN on 13 October 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10223-4:2012: ESIST EN 10223-4:2013
EN 10223-4:2012 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 Information to be supplied by the purchaser .65 Manufacture .65.1 Base metal .65.2 Fabrication .65.2.1 Rolls .65.2.2 Panels .75.3 Welding .76 Requirements .76.1 Tensile strength .76.2 Tolerance on wire diameters .76.3 Coatings .76.3.1 Zinc and zinc alloy coatings .76.3.2 Organic material coatings .86.4 Tolerance on mesh dimensions .86.5 Weld shear strength .87 Sampling and testing .88 Inspection documentation .99 Test methods .99.1 Tensile test .99.2 Wire dimension .99.3 Weld shear strength .99.4 Coating tests .99.4.1 Zinc or zinc alloy coating of wire before welding .99.4.2 Welded mesh which is zinc or zinc alloy coated after welding .99.4.3 Hot dip zinc or zinc alloy coating by a batch process (panels) .99.4.4 Coated with organic material after fabrication .910 Packaging .9Annex A (normative)
Weld shear strength test method (welded mesh) . 10 SIST EN 10223-4:2013
EN 10223-4:2012 (E) 3 Foreword This document (EN 10223-4:2012) has been prepared by Technical Committee ECISS/TC 106 “Wire rod and wires”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2013, and conflicting national standards shall be withdrawn at the latest by May 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 10223-4:1998. EN 10223 "Steel wire and wire products for fencing and netting" consists of the following parts: Part 1: Zinc and zinc-alloy coated steel barbed wire Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes Part 3: Hexagonal steel wire mesh products for engineering purposes Part 4: Steel wire welded mesh fencing Part 5: Steel wire woven hinged joint and knotted mesh fencing Part 6: Steel wire chain link fencing Part 7: Steel wire welded panels for fencing Part 8: Welded mesh gabion products According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 10223-4:2013
EN 10223-4:2012 (E) 4 1 Scope This European Standard specifies requirements for steel wire welded mesh fencing of which there are many types for a variety of applications. It specifies the general characteristics of welded mesh fencing supplied as rolls or panels and coatings, properties and tolerances. This European Standard covers only orthogonal welded mesh i.e. wire welded at right angles to one another. For welded mesh fencing made from panels the specification covers only panels made from wires not greater than 10 mm. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 10021, General technical delivery conditions for steel products EN 10204, Metallic products — Types of inspection documents EN 10218-1, Steel wire and wire products — General — Part 1: Test methods EN 10218-2:2012, Steel wire and wire products — General — Part 2: Wire dimensions and tolerances EN 10244-1, Steel wire and wire products — Non-ferrous metallic coatings on steel wire — Part 1: General principles EN 10244-2:2009, Steel wire and wire products —- Non-ferrous metallic coatings on steel wire — Part 2: Zinc or zinc alloy coatings EN 10245-1, Steel wire and wire products — Organic coatings on steel wire — Part 1: General rules EN 10245-2, Steel wire and wire products — Organic coatings on steel wire — Part 2: PVC finished wire EN 10245-3,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.