SIST EN 10223-5:2013

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahldraht und Erzeugnisse aus Stahldraht für Zäune - Teil 5: Gelenk- und Knotengitter aus Stahldraht für ZäuneFils et produits tréfilés en acier pour clôtures - Partie 5: Grillage noué en acier pour le bétailSteel wire and wire products for fences - Part 5: Steel wire woven hinged joint and knotted mesh fencing91.090Konstrukcije zunaj stavbExternal structures77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chainsICS:Ta slovenski standard je istoveten z:EN 10223-5:2012SIST EN 10223-5:2013en,fr,de01-marec-2013SIST EN 10223-5:2013SLOVENSKI
STANDARDSIST EN 10223-5:20001DGRPHãþD



SIST EN 10223-5:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10223-5
November 2012 ICS 77.140.65 Supersedes EN 10223-5:1998English Version
Steel wire and wire products for fencing and netting - Part 5: Steel wire woven hinged joint and knotted mesh fencing
Fils et produits tréfilés en acier pour clôtures et grillages - Partie 5: Grillage noué et grillage à raccords pivotants en acier
Stahldraht und Drahterzeugnisse für Zäune und Drahtgeflechte - Teil 5: Gelenk- und Knotengitter aus Stahldraht für Zäune This European Standard was approved by CEN on 13 October 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10223-5:2012: ESIST EN 10223-5:2013



EN 10223-5:2012 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 Information to be supplied by the purchaser .65 Designation of hinged joint and knotted mesh fencing.66 Manufacture .66.1 Base metal .66.2 Fabrication .77 Requirements .77.1 Tensile strength .77.1.1 Woven hinged joint fencing .77.1.2 Knotted mesh fencing .77.2 Wire diameters .77.2.1 Woven hinged joint fencing .77.2.2 Knotted mesh fencing .77.3 Tolerances .77.4 Coating .78 Sampling and testing . 109 Inspection documentation . 1010 Test methods . 1010.1 Tensile tests . 1010.2 Coating tests . 1011 Packaging . 10Annex A (informative)
Typical designations for hinged joint and knotted joint fencing . 11 SIST EN 10223-5:2013



EN 10223-5:2012 (E) 3 Foreword This document (EN 10223-5:2012) has been prepared by Technical Committee ECISS/TC 106 “Wire rod and wires”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2013, and conflicting national standards shall be withdrawn at the latest by May 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 10223-5:1998. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. EN 10223 "Steel wire and wire products for fencing and netting" consists of the following parts:  Part 1: Zinc and zinc-alloy coated steel barbed wire  Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes  Part 3: Hexagonal steel wire mesh products for engineering purposes  Part 4: Steel wire welded mesh fencing  Part 5: Steel wire woven hinged joint and knotted mesh fencing  Part 6: Steel wire chain link fencing  Part 7: Steel wire welded panels for fencing  Part 8: Welded mesh gabion products According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 10223-5:2013



EN 10223-5:2012 (E) 4 1 Scope This European Standard specifies preferred dimensions, properties and coatings of zinc and zinc alloy coated steel wire woven hinged joint and knotted mesh fencing. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 10021, General technical delivery conditions for steel products EN 10204, Metallic products — Types of inspection documents EN 10218-1, Steel wire and wire products — General — Part 1: Test methods EN 10218-2:2012, Steel wire and wire products — General — Part 2: Wire dimensions and tolerances EN 10244-1:2009, Steel wire and wire products — Non-ferrous metallic coatings on steel wire — Part
...