SIST EN 14187-3:2017
(Main)Cold applied joint sealants - Test methods - Part 3: Determination of self-levelling properties
Cold applied joint sealants - Test methods - Part 3: Determination of self-levelling properties
This European Standard describes a test method for determination of the self-levelling properties of cold applied normal and fuel resistant joint sealants for concrete pavements to be used in roads, airfields and other trafficked areas.
Kalt verarbeitbare Fugenmassen - Teil 3: Prüfverfahren zur Bestimmung der selbstverlaufenden Eigenschaften
Diese Europäische Norm beschreibt ein Prüfverfahren zur Bestimmung der selbstverlaufenden Eigenschaften von kalt verarbeitbaren, normalen und kraftstoffbeständigen Fugenmassen für Betondecken, die auf Straßen, Flugplätzen und sonstigen Verkehrsflächen verwendet werden.
Mastics pour joints appliqués à froid - Méthodes d'essai - Partie 3: Détermination des propriétés d'autonivellement
Cette Norme européenne spécifie une méthode d'essai permettant de déterminer les propriétés d'auto-nivellement des mastics pour joints appliqués à froid normaux et résistant aux hydrocarbures pour chaussées en béton utilisés pour les routes, les pistes d'aviation et autres surfaces circulées.
Hladno nanosljive tesnilne mase za stike - Preskusne metode - 3. del: Ugotavljanje samoizravnalnih lastnosti
Ta evropski standard določa preskusno metodo za ugotavljanje samoizravnalnih lastnosti hladno nanosljivih običajnih in proti gorivu odpornih tesnilnih mas za stike betonskih površin na cestah, letalskih stezah in drugih prometnih površinah.
General Information
- Status
- Published
- Public Enquiry End Date
- 29-Dec-2014
- Publication Date
- 12-Apr-2017
- Technical Committee
- CES - Roads
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 04-Apr-2017
- Due Date
- 09-Jun-2017
- Completion Date
- 13-Apr-2017
Relations
- Effective Date
- 01-May-2017
Overview
EN 14187-3:2017 specifies a laboratory test method to determine the self-levelling properties of cold applied joint sealants (normal and fuel resistant) intended for concrete pavements in roads, airfields and other trafficked areas. It is part of the EN 14187 series on cold applied joint sealants and is used to assess how a sealant flows and levels in service-like conditions.
Key topics and technical requirements
- Scope: Test method for self-levelling behaviour of cold applied joint sealants for concrete pavements (including fuel resistant types).
- Test principle: Pour sealant into a channel mould and measure surface profile after curing to quantify deviation caused by flow or lack of levelling.
- Apparatus:
- Mixing baker (polyethylene, 250 ml)
- Flat bladed spatula
- Mould: channel 20 ±1 mm wide × 25 ±1 mm deep × 300 ±1 mm long (metal or plastic, 1–2 mm thick)
- Wedges/spirit level for horizontal and 2.5 % slope positioning
- Micrometer (100 µm resolution, ratchet) or equivalent measuring device
- Conditioning: Equipment and samples conditioned 16–24 h at test temperature:
- Horizontal test at (5 ± 2) °C
- Inclined test at (23 ± 2) °C
- Procedure highlights:
- Horizontal mould test: single continuous pour (30 s) from 70–100 mm height, cure 48 h at (5 ± 2) °C, measure depths at centre and multiple offsets, report difference (nearest 0.5 mm).
- Inclined mould test: overfill and strike off, cure 24 h at (23 ± 2) °C and 50 ± 5 % RH on a (2,5 ± 0,1) % slope, measure at specified points, report difference (nearest 0.5 mm).
- Test report must include reference to EN 14187-3:2017, product name/type, batch, test results, deviations, and date.
Applications and users
This standard is practical for:
- Manufacturers (product development and quality control)
- Testing laboratories (type approval, comparative testing)
- Road and airfield authorities (specification and acceptance testing)
- Contractors and pavement engineers (selection of sealants for expansion joints)
- Procurement/spec writers requiring verified self-levelling performance
Using EN 14187-3 helps ensure consistent sealant selection, reliable joint performance, and compliance with specification requirements for trafficked concrete pavements.
Related standards
EN 14187 is a multi-part series. Relevant parts include:
- EN 14187-1: Determination of rate of cure
- EN 14187-2: Determination of tack free time
- EN 14187-4 to -9: Tests for fuel/chemical immersion, hydrolysis, adhesion/cohesion, flame resistance, UV weathering and function testing
Keywords: EN 14187-3:2017, cold applied joint sealants, self-levelling properties, test method, concrete pavements, road construction materials, joint sealant testing.
Frequently Asked Questions
SIST EN 14187-3:2017 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Cold applied joint sealants - Test methods - Part 3: Determination of self-levelling properties". This standard covers: This European Standard describes a test method for determination of the self-levelling properties of cold applied normal and fuel resistant joint sealants for concrete pavements to be used in roads, airfields and other trafficked areas.
This European Standard describes a test method for determination of the self-levelling properties of cold applied normal and fuel resistant joint sealants for concrete pavements to be used in roads, airfields and other trafficked areas.
SIST EN 14187-3:2017 is classified under the following ICS (International Classification for Standards) categories: 91.100.50 - Binders. Sealing materials; 93.080.20 - Road construction materials. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 14187-3:2017 has the following relationships with other standards: It is inter standard links to SIST EN 14187-3:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 14187-3:2017 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hladno nanosljive tesnilne mase za stike - Preskusne metode - 3. del: Ugotavljanje samoizravnalnih lastnostiKalt verarbeitbare Fugenmassen - Teil 3: Prüfverfahren zur Bestimmung der selbstverlaufenden EigenschaftenMastics pour joints appliqués à froid - Méthodes d'essai - Partie 3: Détermination des propriétés d'autonivellementCold applied joint sealants - Test methods - Part 3: Determination of self-levelling properties93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 14187-3:2017SIST EN 14187-3:2017en,fr,de01-maj-2017SIST EN 14187-3:2017SLOVENSKI
STANDARDSIST EN 14187-3:20041DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14187-3
March
t r s y ICS
{ uä r z rä t r Supersedes EN
s v s z yæ uã t r r uEnglish Version
Cold applied joint sealants æ Test methods æ Part
uã Determination of selfælevelling properties Mastics pour joints appliqués à froid æ Méthodes d 5essai æ Partie
u ã Détermination des propriétés d 5autonivellement
Kalt verarbeitbare Fugenmassen æ Prüfverfahren æ Teil
uã Bestimmung der selbstverlaufenden EigenschaftenThis European Standard was approved by CEN on
x February
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s v s z yæ uã t r s y ESIST EN 14187-3:2017
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...