SIST-TP CLC/TR 62453-503-1:2010

SLOVENSKI STANDARD
01-februar-2010
Specifikacija vmesnika orodja procesne naprave - 503-1. del: Implementacija
komunikacije za skupni model objekta - IEC 61784 CP 3/1 in CP 3/2 (IEC/TR 62453-
503-1:2009)
Field device tool interface specification -- Part 503-1: Communication implementation for
common object model - IEC 61784 CP 3/1 and CP 3/2
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 503-1:
Kommunikationsimplementierung mit dem allgemeinen Objektmodell (COM) - IEC 61784
Kommunikationsprofile (CP) 3/1 und 3/2
Ta slovenski standard je istoveten z: CLC/TR 62453-503-1:2009
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

TECHNICAL REPORT
CLC/TR 62453-503-1
RAPPORT TECHNIQUE
November 2009
TECHNISCHER BERICHT
ICS 25.040.40; 35.100.05; 35.110

English version
Field device tool (FDT) interface specification -
Part 503-1: Communication implementation for common object model -
IEC 61784 CP 3/1 and CP 3/2
(IEC/TR 62453-503-1:2009)
Spécification des interfaces des  Field Device Tool (FDT)-
outils des dispositifs de terrain (FDT) - Schnittstellenspezifikation -
Partie 503-1: Implémentation Teil 503-1: Kommunikationsimplementierung
des communications mit dem allgemeinen Objektmodell (COM) -
pour le modèle objet commun - Kommunikationsprofile (CP) 3/1 und 3/2
CEI 61784 CP 3/1 et CP 3/2 nach IEC 61784
(CEI/TR 62453-503-1:2009) (IEC/TR 62453-503-1:2009)

This Technical Report was approved by CENELEC on 2009-10-01.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. CLC/TR 62453-503-1:2009 E

Foreword
The text of document 65E/67/CDV, future edition 1 of IEC/TR 62453-503-1, prepared by SC 65E, Devices
and integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and
automation, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
CLC/TR 62453-503-1 on 2009-10-01.
This standard is to be used in conjunction with EN 62453-3xy series.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the Technical Report IEC/TR 62453-503-1:2009 was approved by CENELEC as a Technical
Report without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61784-1 NOTE  Harmonized as EN 61784-1:2008 (not modified).
__________
- 3 - CLC/TR 62453-503-1:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 61158 series Industrial communication networks - Fieldbus EN 61158 series
specifications
IEC 62453-1 2009 Field device tool (FDT) interface EN 62453-1 2009
specification -
Part 1: Overview and guidance
IEC 62453-2 2009 Field device tool (FDT) interface EN 62453-2 2009
specification -
Part 2: Concepts and detailed description

IEC/TR 62453-41 2009 Field device tool (FDT) interface CLC/TR 62453-41 2009
specification -
Part 41: Object model integration profile -
Common object model
IEC 62453-303-1 2009 Field device tool (FDT) interface EN 62453-303-1 2009
specification -
Part 303-1: Communication profile
integration - IEC 61784 CP 3/1 and CP 3/2

__________
IEC/TR 62453-503-1 ®
Edition 1.0 2009-08
TECHNICAL
REPORT
colour
inside
Field device tool (FDT) interface specification –
Part 503-1: Communication implementation for common object model –
IEC 61784 CP 3/1 and CP 3/2
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
X
ICS 25.040.40; 35.100.05; 35.110 ISBN 2-8318-1058-3
– 2 – TR 62453-503-1 © IEC:2009(E)
CONTENTS
FOREWORD.4
INTRODUCTION.6
1 Scope.7
2 Normative references .7
3 Terms, definitions, symbols, abbreviated terms and conventions .7
3.1 Terms and definitions .7
3.2 Symbols and abbreviated terms.7
3.3 Conventions .8
3.3.1 Data type names and references to data types .8
3.3.2 Vocabulary for requirements.8
4 Bus category .8
5 Access to instance and device data.8
6 Protocol specific behavior.8
6.1 General .8
6.2 Representing modularity.9
6.2.1 Monolithic DTMs.9
6.2.2 Modular DTMs .10
6.3 Interfaces and Information related to Bus Master Configuration.13
6.4 Configuration changes in a device.13
6.5 Error behavior: DTM refuses new BMCP .14
7 Protocol specific usage of general data types .14
8 Network management data types.15
8.1 General .15
8.2 PROFIBUS device address.15
8.3 Master-bus parameter set.15
8.4 Slave bus parameter set.15
8.5 Module and channel data .15
9 Communication data types .18
9.1 General .18
9.2 DPV0 communication – FDTProfibusDPV0CommunicationSchema .18
9.3 DPV1 communication – FDTProfibusDPV1CommunicationSchema .20
10 Channel parameter data types.23
11 Device identification .25
11.1 Device type identification data types – FDTProfibusIdentSchema.25
11.2 Topology scan data types – DTMProfibusDeviceSchema.26
11.3 Scan identification data types – FDTProfibusScanIdentSchema .26
11.4 Device type identification data types – FDTProfibusDeviceIdentSchema .29
11.5 XSLT Transformation .30
Annex A (informative) Example documents for a DTM representing a Remote I/O.43
Bibliography.46

Figure 1 – Part 503-1 of the IEC 62453 series .6
Figure 2 – Example: Device DTM.9
Figure 3 – Example: Gateway DTM.10
Figure 4 – Example: Modular DTM.11

TR 62453-503-1 © IEC:2009(E) – 3 –
Figure 5 – Example: Modular Gateway DTM .12
Figure 6 – Interfaces and information related to bus master configuration.13
Figure 7 – User changes the configuration of a device in the DTMs user interface .14
Figure 8 – Error case: DTM refuses the new BMCP from the frame.14

Table 1 – Protocol specific usage of general data types.15

– 4 – TR 62453-503-1 © IEC:2009(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION –

Part 503-1: Communication implementation for common object model –
IEC 61784 CP 3/1 and CP 3/2
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall no
...