SIST EN 14978:2016/FprA1:2021
(Amendment)Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods
Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods
This European Standard specifies characteristics, requirements and test methods for laminate floor coverings with acrylic based surface layer, electron beam cured as defined in 3.1 and 3.2.
It includes a classification system based on EN ISO 10874, giving practical requirements for areas of use and levels of use, to indicate where laminate floor coverings will give satisfactory service and to encourage the consumer to make an informed choice. It also specifies requirements for marking and packaging.
Laminate floor coverings are considered for domestic and commercial levels of use, e.g. for use in domestic kitchens. This standard does not specify requirements related to areas that are subject to frequent wetting, such as bathrooms, laundry rooms or saunas.
Laminatböden - Elemente mit einer elektronenstrahlgehärteten Deckschicht auf Acryl-Basis - Spezifikationen, Anforderungen und Prüfverfahren
Der letzte Absatz des Anwendungsbereichs
"Für Laminatböden werden die Anwendungsgebiete "Wohnen" und "Gewerblich" berücksichtigt, z. B. für die Verwendung in Küchen im Wohnbereich. Diese Norm legt keine Anforderungen für Bereiche fest, die regelmäßig Nässe ausgesetzt sind wie etwa Badezimmer, Hauswirtschaftsräume oder Saunen"
wird ersetzt durch
"Laminatböden sind im Allgemeinen zur schwimmenden Verlegungen in den Anwendungsgebieten "Wohnen" und "Gewerblich" bestimmt, einschließlich einer Verwendung in Küchen im Wohnbereich. Dieses Dokument legt keine Anforderungen für die Verwendung in Bereichen fest, die regelmäßig Nässe ausgesetzt sind wie etwa Badezimmer, Hauswirtschaftsräume oder Saunen. Im Allgemeinen können Laminatböden in diesen Bereichen nur verwendet werden, wenn dies durch den Hersteller erklärt wird und unter den in den Installationsrichtlinien des Herstellers beschriebenen Bedingungen."
Revêtements de sol stratifiés - Éléments à parement à base acrylique traités par des faisceaux d'électrons - Spécifications, exigences et méthodes d'essai
Laminatne talne obloge - Elementi z vrhnjo plastjo iz akrila, polimeriziranega z elektronskim žarkom - Specifikacije, zahteve in preskusne metode
General Information
- Status
- Not Published
- Public Enquiry End Date
- 02-Aug-2020
- Technical Committee
- ITEK - Textile and textile products
- Current Stage
- 5020 - Formal vote (FV) (Adopted Project)
- Start Date
- 05-May-2021
- Due Date
- 23-Jun-2021
- Completion Date
- 05-May-2021
Relations
- Effective Date
- 30-Jun-2021
- Effective Date
- 01-Jul-2020
Overview
SIST EN 14978:2016/FprA1:2021 is a European standard developed by CEN that specifies the specifications, requirements, and test methods for laminate floor coverings featuring an acrylic-based surface layer cured by electron beam technology. This standard focuses on the technical performance and classification of laminate flooring elements used in both domestic and commercial environments.
This updated version emphasizes practical durability criteria using rigorous testing methods, enhancing the clarity of product classifications and ensuring consumers can make informed choices about suitable laminate floor coverings for different use areas. It specifically addresses floating installation systems and excludes areas subjected to frequent wetting, such as bathrooms and saunas, unless otherwise authorized by the manufacturer.
Key Topics
Laminate Flooring Elements
Defines elements with an acrylic-based surface layer cured by electron beam, enhancing surface strength and durability.Surface Layer Specifications
Details the physical and mechanical properties required, including abrasion resistance, impact resistance, and surface soundness.Classification System
Based on EN ISO 10874, providing levels of use classifications for domestic and commercial applications:- Class 21-23 for domestic use (moderate to heavy)
- Class 31-33 for commercial use (moderate to heavy)
Test Methods and Requirements
Includes specific test procedures such as:- Abrasion resistance (EN 15468:2016+A1:2020)
- Impact resistance with small and big ball tests (EN 17368, EN 13329:2016+A2:2020)
- Resistance to staining (EN 438-2)
- Effect of furniture legs and castor chairs (EN 424, EN 425:2002)
- Swelling thickness limits (ISO 24336)
Substrate Definition
Core material made of wood as defined in EN 13756, constituting at least 65% by mass.Marking and Packaging
Requirements ensure traceability and protection during transport and storage.
Applications
SIST EN 14978:2016/FprA1:2021 is essential for manufacturers, suppliers, and quality assessors of laminate floor coverings with a focus on robust, long-lasting surfaces suitable for:
Domestic Areas
- Kitchens
- Living rooms
- Light to heavy domestic traffic zones (depending on classification)
Commercial Environments
- Office spaces
- Retail areas
- Moderate to heavy commercial use settings where impact and abrasion resistance are critical
Installation Considerations
Designed primarily for floating installation methods, promoting versatile, easy-to-install flooring solutions. Guidance on wet areas is provided, highlighting that laminate floors should generally not be used in spaces with frequent exposure to water unless specifically approved by manufacturers.
Related Standards
- EN ISO 10874 – Classification of laminate floor coverings by use level
- EN 13329 – Test methods for laminate flooring, including impact resistance and surface soundness
- EN 15468 – Abrasion resistance testing for laminate surfaces
- EN 438-2 – Resistance to staining tests
- ISO 24336 – Measurement of swelling thickness caused by water absorption
- EN 425 – Testing castor chair effects on floor coverings
- EN 13756 – Definitions for wood-based laminate core materials
Practical Value
Adherence to SIST EN 14978:2016/FprA1:2021 ensures that laminate floors achieve high durability, safety, and performance standards, supporting manufacturers in delivering products that withstand everyday wear in various environments. For end-users and specifiers, this standard facilitates confidence in selecting laminate flooring that meets precise functional and aesthetic demands, aligned with established European norms.
This contributes to sustainable and cost-effective flooring solutions with proven longevity and performance in both residential and commercial applications.
Frequently Asked Questions
SIST EN 14978:2016/FprA1:2021 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods". This standard covers: This European Standard specifies characteristics, requirements and test methods for laminate floor coverings with acrylic based surface layer, electron beam cured as defined in 3.1 and 3.2. It includes a classification system based on EN ISO 10874, giving practical requirements for areas of use and levels of use, to indicate where laminate floor coverings will give satisfactory service and to encourage the consumer to make an informed choice. It also specifies requirements for marking and packaging. Laminate floor coverings are considered for domestic and commercial levels of use, e.g. for use in domestic kitchens. This standard does not specify requirements related to areas that are subject to frequent wetting, such as bathrooms, laundry rooms or saunas.
This European Standard specifies characteristics, requirements and test methods for laminate floor coverings with acrylic based surface layer, electron beam cured as defined in 3.1 and 3.2. It includes a classification system based on EN ISO 10874, giving practical requirements for areas of use and levels of use, to indicate where laminate floor coverings will give satisfactory service and to encourage the consumer to make an informed choice. It also specifies requirements for marking and packaging. Laminate floor coverings are considered for domestic and commercial levels of use, e.g. for use in domestic kitchens. This standard does not specify requirements related to areas that are subject to frequent wetting, such as bathrooms, laundry rooms or saunas.
SIST EN 14978:2016/FprA1:2021 is classified under the following ICS (International Classification for Standards) categories: 97.150 - Floor coverings. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 14978:2016/FprA1:2021 has the following relationships with other standards: It is inter standard links to SIST EN 14978:2016+A1:2021, SIST EN 14978:2016. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase SIST EN 14978:2016/FprA1:2021 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 14978:2016/oprA1:2020
01-julij-2020
Laminatne talne obloge - Elementi z vrhnjo plastjo iz akrila, polimeriziranega z
elektronskim žarkom - Specifikacije, zahteve in preskusne metode
Laminate floor coverings - Elements with acrylic based surface layer, electron beam
cured - Specifications, requirements and test methods
Laminatböden - Elemente mit einer elektronenstrahlgehärteten Deckschicht auf Acryl-
Basis - Spezifikationen, Anforderungen und Prüfverfahren
Revêtements de sol stratifiés - Éléments à parement à base acrylique traités par des
faisceaux d'électrons - Spécifications, exigences et méthodes d'essai
Ta slovenski standard je istoveten z: EN 14978:2016/prA1
ICS:
97.150 Talne obloge Floor coverings
SIST EN 14978:2016/oprA1:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN 14978:2016/oprA1:2020
SIST EN 14978:2016/oprA1:2020
DRAFT
EUROPEAN STANDARD
EN 14978:2016
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
July 2020
ICS 97.150
English Version
Laminate floor coverings - Elements with acrylic based
surface layer, electron beam cured - Specifications,
requirements and test methods
Revêtements de sol stratifiés - Éléments à parement à Laminatböden - Elemente mit einer
base acrylique traités par des faisceaux d'électrons - elektronenstrahlgehärteten Deckschicht auf Acryl-
Spécifications, exigences et méthodes d'essai Basis - Spezifikationen, Anforderungen und
Prüfverfahren
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 134.
This draft amendment A1, if approved, will modify the European Standard EN 14978:2016. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14978:2016/prA1:2020 E
worldwide for CEN national Members.
SIST EN 14978:2016/oprA1:2020
EN 14978:2016/prA1:2020 (E)
Contents Page
European foreword . 3
1 Modification to Clause 1, Scope . 4
2 Modification to term 3.3, substrate . 4
3 Modification to 5.3, Table 1 . 5
SIST EN 14978:2016/oprA1:2020
EN 14978:2016/prA1:2020 (E)
European foreword
This document (EN 14978:2016/prA1:2020) has been prepared by Technical Committee CEN/TC 134
“Resilient, textile and laminate floor covering”, the secretariat of which is held by NBN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 14978:2016.
In comparison with EN 14
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...