SIST EN IEC 62386-150:2023

SLOVENSKI STANDARD
01-junij-2023
Digitalni naslovljivi vmesnik za razsvetljavo - 150. del: Posebne zahteve - Pomožno
napajanje (IEC 62386-150:2023)
Digital addressable lighting interface - Part 150: Particular requirements - Auxiliary power
supply (IEC 62386-150:2023)
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 150: Besondere
Anforderungen - Ergänzende Spannungsversorgung (IEC 62386-150:2023)
Interface d'éclairage adressable numérique - Partie 150: Exigences particulères -
Alimentation électrique auxiliaire (IEC 62386-150:2023)
Ta slovenski standard je istoveten z: EN IEC 62386-150:2023
ICS:
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62386-150

NORME EUROPÉENNE
EUROPÄISCHE NORM April 2023
ICS 29.140.50; 29.140.99
English Version
Digital addressable lighting interface - Part 150: Particular
requirements - Auxiliary power supply
(IEC 62386-150:2023)
Interface d'éclairage adressable numérique - Partie 150: Digital adressierbare Schnittstelle für die Beleuchtung - Teil
Exigences particulères - Alimentation électrique auxiliaire 150: Besondere Anforderungen - Ergänzende
(IEC 62386-150:2023) Spannungsversorgung
(IEC 62386-150:2023)
This European Standard was approved by CENELEC on 2023-04-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62386-150:2023 E

European foreword
The text of document 34/1009/FDIS, future edition 1 of IEC 62386-150, prepared by IEC/TC 34
"Lighting" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-01-20
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-04-20
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document is read in conjunction with EN IEC 62386-101 and EN IEC 62386-102.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62386-150:2023 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60598-1 NOTE Approved as EN IEC 60598-1
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 62386-101 2022 Digital addressable lighting interface - Part EN IEC 62386-101 2022
101: General requirements - System
components
IEC 62386-102 - Digital addressable lighting interface - Part EN IEC 62386-102 -
102: General requirements - Control gear
IEC 62386-250 - Digital addressable lighting interface - Part EN IEC 62386-250 -
250: Particular requirements - Integrated
power supply (device type 49)
To be published. Stage at time of publication: FprEN IEC 62386-250:2023.
IEC 62386-150 ®
Edition 1.0 2023-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Digital addressable lighting interface –

Part 150: Particular requirements – Auxiliary power supply

Interface d'éclairage adressable numérique –

Partie 150: Exigences particulières – Alimentation électrique auxiliaire

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.50; 29.140.99 ISBN 978-2-8322-6627-4

– 2 – IEC 62386-150:2023 © IEC 2023
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 AUX power supply . 7
4.1 General . 7
4.2 Marking of the interface . 8
4.3 Electrical specification of AUX power supply . 8
4.4 Safety rating . 9
4.5 Output overload and short circuit protection . 10
Bibliography . 11

Figure 1 – IEC 62386 graphical overview . 5
Figure 2 – AUX power supply combined with a bus unit and a bus power supply . 8

Table 1 – Electrical characteristics of an AUX power supply . 9

IEC 62386-150:2023 © IEC 2023 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DIGITAL ADDRESSABLE LIGHTING INTERFACE –

Part 150: Particular requirements – Auxiliary power supply

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of
...