SIST EN 23035:2000

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Einseitige und einwellige Wellpappe - Bestimmung des Flachstauchwiderstandes (ISO 3035:1982)Carton ondulé simple face et double face - Détermination de la résistance a la compression a plat (ISO 3035:1982)Single-faced and single-wall corrugated fibreboard - Determination of flat crush resistance (ISO 3035:1982)85.060Papir, karton in lepenkaPaper and boardICS:Ta slovenski standard je istoveten z:EN 23035:1994SIST EN 23035:2000en01-april-2000SIST EN 23035:2000SLOVENSKI
STANDARD



SIST EN 23035:2000



SIST EN 23035:2000



SIST EN 23035:2000



SIST EN 23035:2000



SIST EN 23035:2000



iii - International Standard INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEX&YHAPO~HAR OPrAHM3AlJMR fl0 CTAH~APTH3Al&WWORGANISATION INTERNATIONALE DE NORMALISATION Single-faced and Single-wall corrugated fibreboard - Determination of f lat crush resistance Carton ondult! simple face et double face - Determination de Ia histance a Ia compression h plat Second edition - 1982-12-01 : ? UDC 676273.31 : 676.017.42 : 539.411 Descriptors : corrugated card boards, tests, compression test, crushing strength. Ref. No. ISO 3035-1982 (E) Price based on 2 pages SIST EN 23035:2000



Foreword ISO (the International Organization for Standardization) is a worldwide federation sf national Standards bodies (ISO member bedies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been authorized has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. International Standard ISO 3035 was developed by Technical Committee ISO/TC 6, Paper, board and pulps. This second edition was submitted directly to the ISO Council, in accordance with clause 6.11.2 of part 1 of the Directives for the technical work sf ISO. lt cancels and replaces the first edition (i.e. ISO 30351975), which had been approved by the member bodies of the following countries: Belgium Ireland Czechoslovakia Israel Egypt, Arab Rep. of New Zealand Finland Norway France * Poland Germany, F. R. Romania Hungary South Africa, Rep. of India Spain Sweden Switzerland Thailand Turkey United Kingdom USA USSR * with the exception of sub-clause 5.1.1. The member bodies of the fol men t on technical grounds: ** Bulgaria Canada ** sub-clause 5.2 only. lowing countries had expressed disapproval 0 International Organkation dar Standardkation, 1982 Printed in Switzerland SIST EN 23035:2000



INTERNATIONAL STANDARD ISO 3035-1982 (E) Single-faced and Single-wall corrugated fibreboard - Determination of flat crush resistance 1 Scope This International Standard specifies a method for the deter- mination of the flat crush resistance of corrugated fibreboard used in the manufacture of packing cases. 2 Field of application The method is applicable to Single-faced and Single-Wall Idouble-faced) corrugated fibreboard. lt is not applicable to double-wall (double-double-faced) corrugated fibreboard. 3 ISO ISO 4 Reference 186, Paper and board - Sampling for testing. 187, Paper and board - Conditioning of samples. Principle Subjection of a test piece from a representative Sample of cor- rugated fibreboard to an increasing forte applied perpen- dicularly to the surface by a compression tester having two flat and parallel platens, until the fluting collapses. Measurement of the maximum forte sustained by the test piece. 5 Apparatus 5.1 Flat crush tester : a motor-driven, platen-type compres- sion tester. The platens shall be large enough to take a test piece of the selected size (sec 5.2) without the test piece projecting beyond the platens. 1) They shall also meet the following requirements: - deviation from parallel not greater than 1 : 1 000; - lateral play not exceeding 0,05 mm.
...