SIST-TP CLC/TR 62453-502:2010

SLOVENSKI STANDARD
01-februar-2010
Specifikacija vmesnika orodja procesne naprave - 502. del: Implementacija
komunikacije za skupni model objekta - IEC 61784 CPF 2 (IEC/TR 62453-502:2009)
Field device tool interface specification -- Part 502: Communication implementation for
common object model - IEC 61784 CPF 2
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 502:
Kommunikationsimplementierung mit dem allgemeinen Objektmodell (COM) - IEC 61784
Kommunikationsprofilfamilie (CPF) 2
Ta slovenski standard je istoveten z: CLC/TR 62453-502:2009
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

TECHNICAL REPORT
CLC/TR 62453-502
RAPPORT TECHNIQUE
November 2009
TECHNISCHER BERICHT
ICS 25.040.40; 35.100.05; 35.110

English version
Field device tool (FDT) interface specification -
Part 502: Communication implementation for common object model -
IEC 61784 CPF 2
(IEC/TR 62453-502:2009)
Spécification des interfaces des outils  Field Device Tool (FDT)-
des dispositifs de terrain (FDT) - Schnittstellenspezifikation -
Partie 502: Implémentation des Teil 502: Kommunikationsimplementierung
communications mit dem allgemeinen Objektmodell (COM) -
pour le modèle objet commun - Kommunikationsprofilfamilie (CPF) 2
CEI 61784 CPF 2 nach IEC 61784
(CEI/TR 62453-502:2009) (IEC/TR 62453-502:2009)

This Technical Report was approved by CENELEC on 2009-10-01.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. CLC/TR 62453-502:2009 E

Foreword
The text of document 65E/66/CDV, future edition 1 of IEC/TR 62453-502, prepared by SC 65E, Devices
and integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and
automation, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
CLC/TR 62453-502 on 2009-10-01.
This standard is to be used in conjunction with EN 62453-3xy series.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the Technical Report IEC/TR 62453-502:2009 was approved by CENELEC as a Technical
Report without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61131-3 NOTE  Harmonized as EN 61131-3:2003 (not modified).
IEC 61784-3-2 NOTE  Harmonized as EN 61784-3-2:2008 (not modified).
__________
- 3 - CLC/TR 62453-502:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

1) 2)
IEC 61158-2 - Industrial communication networks - EN 61158-2 2008
Fieldbus specifications -
Part 2: Physical layer specification
and service definition
1) 2)
IEC 61158-3-2 - Industrial communication networks - EN 61158-3-2 2008
Fieldbus specifications -
Part 3-2: Data-link layer service definition -
Type 2 elements
1) 2)
IEC 61158-4-2 - Industrial communication networks - EN 61158-4-2 2008
Fieldbus specifications -
Part 4-2: Data-link layer protocol
specification - Type 2 elements

1) 2)
IEC 61158-5-2 - Industrial communication networks - EN 61158-5-2 2008
Fieldbus specifications -
Part 5-2: Application layer service definition -
Type 2 elements
1) 2)
IEC 61158-6-2 - Industrial communication networks - EN 61158-6-2 2008
Fieldbus specifications -
Part 6-2: Application layer protocol
specification - Type 2 elements

1) 2)
IEC 61784-1 - Industrial communication networks - Profiles - EN 61784-1 2008
Part 1: Fieldbus profiles
1) 2)
IEC 61784-2 - Industrial communication networks - Profiles - EN 61784-2 2008
Part 2: Additional fieldbus profiles for real-time
networks based on ISO/IEC 8802-3

1) 2)
IEC 62026-3 - Low-voltage switchgear and controlgear - EN 62026-3 2009
Controller-device interfaces (CDIs) -
Part 3: DeviceNet
IEC 62453-1 2009 Field device tool (FDT) interface EN 62453-1 2009
specification -
Part 1: Overview and guidance
IEC 62453-2 2009 Field device tool (FDT) interface EN 62453-2 2009
specification -
Part 2: Concepts and detailed description

IEC/TR 62453-41 2009 Field device tool (FDT) interface CLC/TR 62453-41 2009
specification -
Part 41: Object model integration profile -
Common object model
1)
Undated reference.
2)
Valid edition at date of issue.

Publication Year Title EN/HD Year

IEC 62453-302 2009 Field device tool (FDT) interface EN 62453-302 2009
specification -
Part 302: Communication profile integration -
IEC 61784 CPF 2
__________
IEC/TR 62453-502 ®
Edition 1.0 2009-08
TECHNICAL
REPORT
colour
inside
Field device tool (FDT) interface specification –
Part 502: Communication implementation for common object model – IEC 61784
CPF 2
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
S
ICS 25.040.40; 35.100.05; 35.110 ISBN 2-8318-1058-6
– 2 – TR 62453-502 © IEC:2009(E)
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 Scope.6
2 Normative references .6
3 Terms, definitions, symbols, abbreviated terms and conventions .7
3.1 Terms and definitions .7
3.2 Symbols and abbreviated terms.7
3.3 Conventions .7
3.3.1 Data type names and references to data types .7
3.3.2 Vocabulary for requirements.7
4 Bus category .8
5 Access to instance and device data.8
6 Protocol specific behavior.8
7 Protocol specific usage of general data types .8
8 Protocol specific common data types – DTMCIPDataTypeSchema .8
9 Network management data types.11
9.1 General .11
9.2 Node address.11
9.3 Scanner/Master – Bus Parameter Set (CIP) –
FDTCIPDTMParameterSchema .11
10 Communication data types .16
11 Channel parameter data types.17
12 Device identification .19
12.1 Device type identification data types – FDTCIPIdentSchema.19
12.2 Topology scan data types.19
12.3 Scan identification data types – FDTCIPScanIdentSchema .19
12.4 Device type identification data types – FDTCIPDeviceTypeIdentSchema.20
Annex A (informative) Implementation hints .21
Bibliography.22

Figure 1 – Part 502 of the IEC 62453 series .5

Table 1 – Protocol specific usage of general attributes .8

TR 62453-502 © IEC:2009(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION –

Part 502: Communication implementation for common object model –
IEC 61784 CPF 2
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. However, a
technical committee may propose the publication of a technical report when it has collected
data of a different kind from that which is normally published as an International Standard, for
example "state of the art".
IEC/TR 62453-502, which is a technical report, has been prepared by subcommittee 65E:
Devices and integration in enterprise systems, of IEC technical committee 65: Industrial-
process measurement, control and automation:
This part, in conjunction with the other parts of the first edition of the IEC 62453 series
cancels and replaces IEC/PAS 62453-1, IEC/PAS 62453-2, IEC/PAS 62453-3, IEC/PAS
62453-4 and IEC/PAS 62453-5 published in 2006, and constitutes a technical revision.
Each part
...