SIST EN IEC 61158-5-10:2019

SLOVENSKI STANDARD
01-november-2019
Nadomešča:
SIST EN 61158-5-10:2015
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 5-10. del:
Definicija opravil na aplikacijski ravni - Elementi tipa 10 (IEC 61158-5-10:2019)
Industrial communication networks - Fieldbus specifications - Part 5-10: Application layer
service definition - Type 10 elements (IEC 61158-5-10:2019)
Industrielle Kommunikationsnetze - Feldbusse - Teil 5-10: Dienstfestlegungen des
Application Layer (Anwendungsschicht) - Typ 10-Elemente (IEC 61158-5-10:2019)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 5-10 :
Définition des services de la couche application - Éléments de type 10 (IEC 61158-5-
10:2019)
Ta slovenski standard je istoveten z: EN IEC 61158-5-10:2019
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.70 Uporabniški sloj Application layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61158-5-10

NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2019
ICS 25.040.40; 35.100.70; 35.110 Supersedes EN 61158-5-10:2014
English Version
Industrial communication networks - Fieldbus specifications -
Part 5-10: Application layer service definition - Type 10 elements
(IEC 61158-5-10:2019)
Réseaux de communication industriels - Spécifications des Industrielle Kommunikationsnetze - Feldbusse - Teil 5-10:
bus de terrain - Partie 5-10 : Définition des services de la Dienstfestlegungen des Application Layer
couche application - Éléments de type 10 (Anwendungsschicht) - Typ 10-Elemente
(IEC 61158-5-10:2019) (IEC 61158-5-10:2019)
This European Standard was approved by CENELEC on 2019-05-15. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61158-5-10:2019 E

European foreword
The text of document 65C/947/FDIS, future edition 4 of IEC 61158-5-10, prepared by SC 65C
"Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61158-5-
10:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-02-15
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-05-15
document have to be withdrawn
This document supersedes EN 61158-5-10:2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 61158-5-10:2019 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60870-5-4 NOTE Harmonized as EN 60870-5-4
IEC 61131-1 NOTE Harmonized as EN 61131-1
IEC 61131-3 NOTE Harmonized as EN 61131-3
IEC 61375-2-1 NOTE Harmonized as EN 61375-2-1
IEC 61784-1 NOTE Harmonized as EN 61784-1
IEC 61784-2 NOTE Harmonized as EN 61784-2

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61158-1 2019 Industrial communication networks - EN IEC 61158-1 2019
Fieldbus specifications - Part 1: Overview
and guidance for the IEC 61158 and IEC
61784 series
IEC 61158-5-3 -  Industrial communication networks - EN 61158-5-3 -
Fieldbus specifications - Part 5-3:
Application layer service definition - Type 3
elements
IEC 61158-6-3 -  Industrial communication networks - EN 61158-6-3 -
Fieldbus specifications - Part 6-3:
Application layer protocol specification -
Type 3 elements
IEC 61158-6-10 2019 Industrial communication networks - EN 61158-6-10 2019
Fieldbus specifications - Part 6-10:
Application layer protocol specification -
Type 10 elements
IEC 61800-7-203 2015 Adjustable speed electrical power drive EN 61800-7-203 2016
systems - Part 7-203: Generic interface
and use of profiles for power drive systems
- Profile type 3 specification
Industrial communication networks – High
IEC 62439-2 -  EN 62439-2 -
availability automation networks – Part 2:
Media Redundancy Protocol (MRP)
ISO/IEC 646 -  Information technology; ISO 7-bit coded - -
character set for information interchange
ISO/IEC 7498-1 -  Information technology - Open Systems - -
Interconnection - Basic reference model:
The basic model
ISO/IEC 8822 -  Information technology - Open Systems - -
Interconnection - Presentation service
definition
Publication Year Title EN/HD Year
ISO/IEC 8824-1 -  Information technology - Abstract Syntax - -
Notation One (ASN.1): Specification of
basic notation
ISO/IEC 9545 -  Information technology - Open Systems - -
Interconnection - Application layer
structure
ISO/IEC 9834-8 -  Information technology - Procedures for - -
the operation of object identifier registration
authorities - Part 8: Generation of
universally unique identifiers (UUIDs) and
their use in object identifiers
ISO/IEC 10646 -  Information technology_- Universal Coded - -
Character Set (UCS)
ISO/IEC 10731 -  Information technology - Open Systems - -
Interconnection - Basic Reference Model -
Conventions for the definition of OSI
services
ISO/IEC 15802-1 -  Information technology - - -
Telecommunications and information
exchange between systems - Local and
metropolitan area networks - Common
specifications - Part 1: Medium Access
Control (MAC) service definition
ISO/IEC/IEEE 60559 2011 Information technology - Microprocessor - -
Systems - Floating-Point arithmetic
ISO 8601 -  Data elements and interchange formats - - -
Information interchange - Representation
of dates and times
IEEE Std 802 -  IEEE Standard for Local and metropolitan - -
area networks: Overview and Architecture
IEEE Std 802.1 -  IEEE Standard for Local and metropolitan - -
area networks: Station and Media Access
Control Connectivity Discovery
IEEE Std 802.1AB -  IEEE Standard for Local and metropolitan - -
area networks: Station and Media Access
Control Connectivity Discovery
IEEE Std 802.1AS -  IEEE Standard for Information technology - - -
Telecommunications and information
exchange between systems - IEEE
standard for Local and metropolitan area
networks - Timing and Synchronization for
Time-Sensitive Applications in Bridged
Local Area Networks
IEEE Std 802.1Q -  IEEE Standard for Local and metropolitan - -
area networks - Media Access Control
(MAC) Bridges and Virtual Bridged Local
Area Networks
IEEE Std 802.3 -  IEEE Standard for Ethernet - -
IETF RFC 768 -  User Datagram Protocol - -
Publication Year Title EN/HD Year
IETF RFC 791 -  Internet Protocol - -
IETF RFC 792 -  Internet Control Message Protocol - -
IETF RFC 826 -  Ethernet Address Resolution Protocol: Or - -
Converting Network Protocol Addresses to
48.bit Ethernet Address for Transmission
on Ethernet Hardware
IETF RFC 894 -  Standard for the Transmission of IP - -
Datagrams over Ethernet Networks
IETF RFC 1034 -  Domain names - concepts and facilities - -
IETF RFC 1112 -  Host Extensions for IP Multicasting - -
IETF RFC 1157 -  Simple Network Management Protocol - -
(SNMP)
IETF RFC 1213 -  Management Information Base for Network - -
Management of TCP/IP-based Internets:
MIB-II
IETF RFC 2131 -  Dynamic Host Configuration Protocol - -
IETF RFC 2132 -  DHCP Options and BOOTP Vendor - -
Extensions
IETF RFC 2365 -  Administratively Scoped IP Multicast - -
IETF RFC 2674 -  Definitions of Managed Objects for Bridges - -
with Traffic Classes, Multicast Filtering and
Virtual LAN Extensions
IETF RFC 2737 -  Entity MIB (Version 2) - -
IETF RFC 2863 -  The Interfaces Group MIB - -
IETF RFC 3418 -  Management Information Base (MIB) for - -
the Simple Network Management Protocol
(SNMP)
IETF RFC 3490 -  Internationalizing Domain Names in - -
Applications (IDNA)
IETF RFC 3621 -  Power Ethernet MIB - -
IETF RFC 4836 -  Definitions of Managed Objects for IEEE - -
802.3 Medium Attachment Units (MAUs)
IETF RFC 5905 -  Network Time Protocol Version 4: Protocol - -
and Algorithms Specification
IETF RFC 6890 -  Special-Purpose IP Address Registries - -
The Open Group - - Technical standard DCE1.1: Remote - -
Publication C706 Procedure Call

IEC 61158-5-10 ®
Edition 4.0 2019-04
INTERNATIONAL
STANDARD
colour
inside
Industrial communication networks – Fieldbus specifications –

Part 5-10: Application layer service definition – Type 10 elements

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 25.040.40; 35.100.70; 35.110 ISBN 978-2-8322-6741-7

– 2 – IEC 61158-5-10:2019 © IEC 2019
CONTENTS
FOREWORD . 15
INTRODUCTION . 17
1 Scope . 18
1.1 General . 18
1.2 Specifications . 19
1.3 Conformance . 19
2 Normative references . 19
3 Terms, definitions, abbreviations, symbols and conventions . 22
3.1 Referenced terms and definitions . 22
3.1.1 ISO/IEC 7498-1 terms. 22
3.1.2 ISO/IEC 8822 terms . 22
3.1.3 ISO/IEC 9545 terms . 22
3.1.4 ISO/IEC 8824-1 terms. 23
3.2 Additional Type 10 terms and definitions . 23
3.3 Additional Type 10 terms and definitions for media redundancy . 30
3.4 Abbreviations and symbols . 32
3.4.1 General . 32
3.4.2 Additional Type 10 abbreviations and symbols . 33
3.4.3 Abbreviations and symbols for services . 34
3.5 Conventions . 34
3.5.1 Overview . 34
3.5.2 General conventions . 34
3.5.3 Conventions for class definitions . 34
3.5.4 Conventions for service definitions . 36
3.5.5 Conventions used in state machines . 37
4 Concepts . 40
5 Data type ASE . 40
5.1 General . 40
5.1.1 Overview . 40
5.1.2 Date and time type specifics . 41
5.1.3 Transfer of user data . 41
5.1.4 Data type overview . 41
5.2 Formal definition of data type objects . 44
5.2.1 Data type class . 44
5.3 FAL defined data types . 45
5.3.1 Fixed length types . 45
5.3.2 Variable Length types . 66
5.4 Data type ASE service specification . 69
6 Communication model for common services . 69
6.1 Concepts . 69
6.1.1 Overview . 69
6.1.2 Middle Layer ASEs . 69
6.2 ASE data types . 69
6.3 Application Service Elements . 69
6.3.1 Remote procedure call ASE . 69
6.3.2 Domain name system ASE . 78

IEC 61158-5-10:2019 © IEC 2019 – 3 –
6.3.3 Simple network management ASE . 79
6.3.4 IP suite ASE . 80
6.3.5 Real time cyclic ASE . 84
6.3.6 Real time acyclic ASE . 100
6.3.7 Discovery and basic configuration ASE . 110
6.3.8 Dynamic host configuration ASE . 138
6.3.9 IEEE 802.1AB ASE . 138
6.3.10 Media redundancy ASE . 151
6.3.11 Precision time control ASE . 158
6.3.12 IEEE 802.1AS ASE . 172
6.3.13 Virtual Bridges ASE . 175
6.3.14 MAC Bridges ASE . 178
6.3.15 Fragmentation ASE . 191
6.3.16 IEEE 802.3 ASE . 192
6.3.17 Common DL mapping ASE . 195
7 Communication model for decentralized periphery . 200
7.1 Concepts . 200
7.1.1 User requirements . 200
7.1.2 Features . 200
7.1.3 Associations . 201
7.1.4 Device types . 202
7.1.5 Instance model and device addresses . 210
7.1.6 Application process . 210
7.1.7 Application service element . 217
7.1.8 Application relationship . 219
7.2 ASE data types . 220
7.3 ASEs . 220
7.3.1 AR ASE . 220
7.3.2 Real Identification ASE . 355
7.3.3 Communication Interface Management ASE . 445
7.3.4 Diagnosis ASE . 516
7.3.5 PE ASE . 561
7.3.6 LogBook ASE . 571
7.3.7 RS ASE . 574
7.3.8 Time ASE . 599
7.4 Application characteristics . 604
7.4.1 Device ident number . 604
7.4.2 Network topology . 604
7.5 Summary of FAL services . 606
7.5.1 IO device . 606
7.5.2 IO controller . 607
7.5.3 IO Supervisor . 607
Annex A (informative) Device instances . 608
Annex B (informative) Components of an Ethernet interface . 610
Annex C (informative) Scheme of MAC address assignment . 614
Annex D (informative) Measurement of the fast startup time . 615
Annex E (informative) Dynamic Frame Packing . 616
Annex F (informative) Precondition for Diagnosis . 624

– 4 – IEC 61158-5-10:2019 © IEC 2019
Bibliography . 629

Figure 1 – Middle Layer ASEs communication architecture . 69
Figure 2 – Sequence Chart for reading the EndPointMapper . 71
Figure 3 – Media redundancy diagnosis dependencies . 157
Figure 4 – PTCP applications. 158
Figure 5 – Example of periods at a local port . 177
Figure 6 – Example of communication between controlling devices and field devices . 201
Figure 7 – Example of communication between an engineering station and several

controlling and field devices . 202
Figure 8 – Example of communication between field devices and a server station . 202
Figure 9 – Example of communication between field devices . 202
Figure 10 – Data Objects and Diagnosis Data Model . 206
Figure 11 – Example for channel modelling . 207
Figure 12 – Mapping to PROFINET device model . 208
Figure 13 – Identification hierarchy . 208
Figure 14 – Application Process with application process objects (APOs) . 211
Figure 15 – Access to a remote APO . 212
Figure 16 – Access to a remote APO for provider/consumer association . 213
Figure 17 – Overview of application processes . 214
Figure 18 – IO device with APs, slots and subslots . 214
Figure 19 – Example 1 structural units for interfaces and ports within API 0 . 216
Figure 20 – Example 2 structural units for interfaces and ports within API 0 . 217
Figure 21 – FAL ASEs communication architecture . 218
Figure 22 – Example of one AR with two AREPs . 220
Figure 23 – Example IO application relationship (one-to-one) . 223
Figure 24 – Example IO application relationship one-to-many . 224
Figure 25 – Implicit application relationship . 225
Figure 26 – State transition diagram DEVSM . 257
Figure 27 – State transition diagram CTLSM . 265
Figure 28 – Assignment of Communication Relationship to Application Relationship . 270
Figure 29 – Overview Communication Relationship Class service interactions . 273
Figure 30 – Example for an intersection of IO device, slot, and AR . 336
Figure 31 – Substitute Value . 364
Figure 32 – State transition diagram RSMSM . 372
Figure 33 – Ownership handling. 376
Figure 34 – State transition diagram OWNSM . 379
Figure 35 – State transition diagram ASSSM . 380
Figure 36 – State transition diagram PLUGSM . 392
Figure 37 – State transition diagram PULLSM . 395
Figure 38 – Basic model for isochronous applications . 424
Figure 39 – General isochronous application model (example CACF == 1) . 425
Figure 40 – General isochronous application model (example CACF == 2) . 426

IEC 61158-5-10:2019 © IEC 2019 – 5 –
Figure 41 – ASE relations in an IO device operating in isochronous mode for a
submodule . 432
Figure 42 – State transition diagram of ISOM_SYNC . 434
Figure 43 – State transition diagram ISOM_OUT . 437
Figure 44 – State transition diagram ISOM_IN . 442
Figure 45 – State transition diagram SYNC_DIAG. 484
Figure 46 – MRP interconnection . 506
Figure 47 – Diagnosis Base Model . 516
Figure 48 – Severity classification of fault, maintenance and qualified . 517
Figure 49 – Data Base Model . 518
Figure 50 – State transition diagram DIAG_DIAG . 547
Figure 51 – State transition diagram DIAG_MR . 551
Figure 52 – State transition diagram DIAG_MD . 554
Figure 53 – State transition diagram DIAG_QUALIFIED . 558
Figure 54 – Architecture. 562
Figure 55 – State transition diagram PESM . 570
Figure 56 – Reporting System components . 575
Figure 57 – AR / ARSet and Reporting System . 576
Figure 58 – Max Scan Delay . 584
Figure 59 – RS Incident window . 587
Figure 60 – State transition diagram RSOBS . 592
Figure 61 – State transition diagram RSBUF . 596
Figure 62 – State transition diagram TimeSM . 602
Figure 63 – Example of network topology including slower wireless segments . 605
Figure 64 – Example of media redundancy including wireless segments . 605
Figure A.1 – Instance model . 608
Figure B.1 – Scheme of an Ethernet interface . 610
Figure B.2 – Scheme of an Ethernet interface with bridging ability . 611
Figure B.3 – Scheme of an Ethernet interface with optical ports . 612
Figure B.4 – Scheme of an Ethernet interface with bridging ability using radio
communication . 613
Figure B.5 – Scheme of an Ethernet interface with radio communication . 613
Figure C.1 – Scheme of MAC address assignment . 614
Figure D.1 – Measurement of the fast startup time . 615
Figure E.1 – Frame Layout . 616
Figure E.2 – Subframe Layout . 617
Figure E.3 – End to End . 618
Figure E.4 – Dynamic frame packing . 618
Figure E.5 – Dynamic frame packing – Truncation of outputs . 619
Figure E.6 – Dynamic frame packing – Outbound Pack . 619
Figure E.7 – Dynamic frame packing – Concatenation of inputs . 620
Figure E.8 – Dynamic frame packing – Inbound Pack . 621
Figure E.9 – Dynamic frame packing – Distributed watchdog . 623
Figure E.10 – Interrelation between IO CR and dynamically packed frame . 623

– 6 – IEC 61158-5-10:2019 © IEC 2019

Table 1 – State machine description elements . 37
Table 2 – Description of state machine elements . 38
Table 3 – Conventions used in state machines . 38
Table 4 – Conventions for services used in state machines . 39
Table 5 – Data type overview . 41
Table 6 – V2 octets . 46
Table 7 – L2 octets . 46
Table 8 – E2 octets . 47
Table 9 – E2 value range . 47
Table 10 – Unipolar2.16 octets . 48
Table 11 – Unipolar2.16 value range . 48
Table 12 – N2 value range . 49
Table 13 – N4 value range . 50
Table 14 – X2 value range . 51
Table 15 – X4 value range . 52
Table 16 – C4 value range . 53
Table 17 – T2 value range . 54
Table 18 – T4 value range . 55
Table 19 – D2 value range . 56
Table 20 – R2 value range . 56
Table 21 – Status value range . 57
Table 22 – Status value range . 58
Table 23 – F message trailer with 4 octets . 62
Table 24 – Unsigned16_S octets . 64
Table 25 – Unsigned16_S meaning . 64
Table 26 – Integer16_S octets . 65
Table 27 – Integer16_S meaning . 65
Table 28 – Unsigned8_S octets . 65
Table 29 – Unsigned8_S meaning . 65
Table 30 – OctetString_S octets . 66
Table 31 – OctetString_S status bits . 67
Table 32 – Connect. 72
Table 33 – Release . 73
Table 34 – Read . 74
Table 35 – Write . 75
Table 36 – Control . 76
Table 37 – ReadImplicit . 77
Table 38 – Add Static ARP Cache Entry . 83
Table 39 – Remove Static ARP Cache Entry . 83
Table 40 – PPM Set Prov Data . 89
Table 41 – PPM Set Prov Status . 90
Table 42 – PPM Activate . 91

IEC 61158-5-10:2019 © IEC 2019 – 7 –
Table 43 – PPM Close . 93
Table 44 – PPM Start . 94
Table 45 – PPM Error . 94
Table 46 – Get Cons Data . 94
Table 47 – CPM Get cons status . 95
Table 48 – CPM Set RedRole . 96
Table 49 – CPM Activate . 97
Table 50 – CPM NoData . 99
Table 51 – CPM Stop . 99
Table 52 – CPM New Data Indication . 100
Table 53 – APMS Activate . 103
Table 54 – APMR Activate . 104
Table 55 – APMS A Data . 106
Table 56 – APMR A Data . 107
Table 57 – APMR Ack . 107
Table 58 – APMS Error . 108
Table 59 – APMS Error ERRCLS/ERRCODE . 108
Table 60 – APMR Error . 109
Table 61 – APMR Error ERRCLS/ERRCODE . 109
Table 62 – APMS_Close . 109
Table 63 – APMR_Close . 110
Table 64 – Get . 118
Table 65 – Set . 123
Table 66 – Local Set Command . 128
Table 67 – Identify . 130
Table 68 – Hello . 136
Table 69 – System capabilities . 144
Table 70 – Auto negotiation support and status . 145
Table 71 – MDI Power Support . 146
Table 72 – Link aggregation status . 146
Table 73 – Remote systems data change . 150
Table 74 – Start bridge . 165
Table 75 – Start slave . 166
Table 76 – Start master . 167
Table 77 – Stop bridge. 168
Table 78 – Stop slave . 169
Table 79 – Stop master . 170
Table 80 – Sync state change . 170
Table 81 – Line Delay change . 171
Table 82 – Local Get Time . 174
Table 83 – Local time state info . 174
Table 84 – Allowed values of Forwarding Mode . 181
Table 85 – Allowed values of Fast Forwarding Multicast MAC Add . 181
...