SIST EN 15032:2006

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kemikalije, ki se uporabljajo za pripravo bazenske vode - Trikloroisocianova kislinaProdukte zur Aufbereitung von Schwimm-und Badebeckenwasser - TrichlorisocyanursäureProduits chimiques utilisés pour le traitement de l'eau des piscines - Acide trichloroisocyanuriqueChemicals used for treatment of swimming pool water - Trichloroisocyanuric acid71.100.80Chemicals for purification of water13.060.25Voda za industrijsko uporaboWater for industrial useICS:Ta slovenski standard je istoveten z:EN 15032:2006SIST EN 15032:2006en,fr,de01-oktober-2006SIST EN 15032:2006SLOVENSKI
STANDARD



SIST EN 15032:2006



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15032July 2006ICS 71.100.80 English VersionChemicals used for treatment of swimming pool water -Trichloroisocyanuric acidProduits chimiques utilisés pour le traitement de l'eau despiscines - Acide trichloroisocyanuriqueProdukte zur Aufbereitung von Schwimm-undBadebeckenwasser - TrichlorisocyanursäureThis European Standard was approved by CEN on 5 June 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15032:2006: ESIST EN 15032:2006



EN 15032:2006 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative reference.5 3 Description.5 4 Purity criteria.5 5 Test methods.6 6 Labelling - Transportation - Storage.6 Annex A (informative)
General information on trichloroisocyanuric acid.9 Annex B (normative)
General rules relating to safety.11 Bibliography.12
SIST EN 15032:2006



EN 15032:2006 (E) 3 Foreword This document (EN 15032:2006) has been prepared by Technical Committee CEN/TC 164 “Water supply”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2007, and conflicting national standards shall be withdrawn at the latest by January 2007. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
SIST EN 15032:2006



EN 15032:2006 (E) 4 Introduction In respect of potential adverse effects on the quality of water for swimming pools caused by the product covered by this European Standard: 1) this European Standard provides no information as to whether the product may be used without restriction in any of the Member States of the EU or EFTA;
2) it should be noted that, while awaiting the adoption of verifiable European criteria, existing national regulations concerning the use and/or the characteristics of this product remain in force.
NOTE Conformity with the European Standard does not confer or imply acceptance or approval of the product in any of the Member States of the EU or EFTA. The use of the product covered by this European Standard is subject to regulation or control by National Authorities. SIST EN 15032:2006



EN 15032:2006 (E) 5 1 Scope This European Standard is applicable to trichloroisocyanuric acid used directly or used to prepare commercial formulations for disinfecting swimming pool water. It describes the characteristics of trichloroisocyanuric acid and specifies the requirements and the corresponding test methods for trichloroisocyanuric acid. It gives information on its use for treating swimming pool water and determines the rules relating to safe handling and use (see Annex B). 2 Normative reference The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12933, Chemicals used for treatment of water intended for human consumption — Chemicals for emergency use — Trichloroisocyanuric acid 3 Description The identification, commercial form, physical properties and chemical properties are given in the relevant sub-clauses of EN 12933. 4 Purity criteria 4.1
General This European Standard specifies the minimum purity requirements for trichloroisocyanuric acid used for the treating swimming pool water. Limits are given for impurities commonly present in this product and depending on the raw material and the manufacturing process, other impurities may be present and if so, the user and when necessary, the relevant authorities shall be notified. NOTE Users of the product should check the national regulations in order to clarify whether it is of appropriate purity for treating swimming pool water, taking into account water quality, required dosage, contents of other impurities and additives used in the product not stated in this product standard. Limits have been given for impurities and chemical parameters where they are likely to be present in significant quantities from the current production process and raw materials. If the production process or raw materials lead to the presence of significant quantities of other impure by-products or additives being present, the user shall be notified. 4.2 Composition of commercial product The commercial product shall contain at least a mass fraction of 89 % of available chlorine as calculated in accordance with the corresponding method given in EN 12933. 4.3 Im
...