Measurement of internal electric field in insulating materials - Pressure wave propagation method (IEC 62836:2024)

IEC 62836:2024 provides an efficient and reliable procedure to test the internal electric field in the insulating materials used for high-voltage applications, by using the pressure wave propagation (PWP) method. It is suitable for a planar and coaxial geometry sample with homogeneous insulating materials of thickness larger or equal to 0,5 mm and an electric field higher than 1 kV/mm, but it is also dependent on the thickness of the sample and the pressure wave generator.
This first edition cancels and replaces IEC TS 62836 published in 2020.
This edition includes the following significant technical changes with respect to IEC TS 62836:
a) addition of Clause 12 for the measurement of space charge distribution in a planar sample;
b) addition of Clause 13 for coaxial geometry samples;
c) addition of Annex D with measurement examples for coaxial geometry samples;
d) addition of a Bibliography;
e) measurement examples for a planar sample have been moved from Clause 12 in IEC TS 62836 to Annex C.

Messung des inneren elektrischen Feldes in Isoliermaterialien - Methode der Druckwellenausbreitung (propagation method) (IEC 62836:2024)

Mesurage du champ électrique interne dans les matériaux isolants - Méthode de l'onde de pression (IEC 62836:2024)

L’IEC 62836 :2024 fournit une procédure efficace et fiable pour évaluer le champ électrique interne dans les matériaux isolants utilisés pour les applications à haute tension, par la méthode de l'onde de pression (PWP). Cette méthode convient aux échantillons à géométrie plane et coaxiale constitués de matériaux isolants homogènes d'une épaisseur supérieure ou égale à 0,5 mm et aux champs électriques supérieurs à 1 kV/mm, mais elle dépend également de l'épaisseur de l'échantillon et du générateur d'ondes de pression.
Cette première édition annule et remplace l'IEC TS 62836 parue en 2020.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'IEC TS 62836:
a) ajout de l'Article 12 relatif au mesurage de la répartition des charges d'espace sur un échantillon plan;
b) ajout de l'Article 13 relatif aux échantillons à géométrie coaxiale;
c) ajout de l'Annexe D qui fournit des exemples de mesurages sur des échantillons à géométrie coaxiale;
d) ajout d'une Bibliographie;
e) les exemples de mesurages sur un échantillon plan ont été déplacés de l'Article 12 de l'IEC TS 62836 à l'Annexe C.

Merjenje notranjega električnega polja v izolacijskih materialih - Metoda širjenja tlačnega vala (IEC 62836:2024)

Standard IEC 62836:2024 podaja učinkovit in zanesljiv postopek za preskušanje notranjega električnega polja v izolacijskih materialih, ki se uporabljajo pri visoki napetosti, z uporabo metode širjenja tlačnega vala (PWP). Ta postopek je primeren za vzorce s planarno in koaksialno geometrijo s homogenimi izolacijskimi materiali z debelino, ki je večja ali enaka 0,5 mm, ter električnim poljem, ki presega 1 kV/mm, odvisen pa je tudi od debeline vzorca in generatorja tlačnih valov.
Prva izdaja razveljavlja in nadomešča standard IEC TS 62836, objavljen leta 2020.
Ta izdaja v primerjavi s standardom IEC TS 62836 vključuje naslednje pomembne tehnične spremembe:
a) dodana je bila točka 12 o merjenju porazdelitve prostorskega naboja v planarnem vzorcu;
b) dodana je bila točka 13 o vzorcih s koaksialno geometrijo;
c) dodan je bil dodatek D s primeri meritev za vzorce s koaksialno geometrijo;
d) dodano je bilo poglavje Literatura;
e) primeri meritev za planarne vzorce so bili premaknjeni iz točke 12 v standardu IEC TS 62836 v dodatek C.

General Information

Status
Published
Public Enquiry End Date
31-Jul-2023
Publication Date
16-Apr-2024
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
10-Apr-2024
Due Date
15-Jun-2024
Completion Date
17-Apr-2024

Buy Standard

Standard
EN IEC 62836:2024 - BARVE
English language
48 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN IEC 62836:2023 - BARVE
English language
43 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62836:2024
01-junij-2024
Merjenje notranjega električnega polja v izolacijskih materialih - Metoda širjenja
tlačnega vala (IEC 62836:2024)
Measurement of internal electric field in insulating materials - Pressure wave propagation
method (IEC 62836:2024)
Messung des inneren elektrischen Feldes in Isoliermaterialien - Methode der
Druckwellenausbreitung (propagation method) (IEC 62836:2024)
Mesurage du champ électrique interne dans les matériaux isolants - Méthode de l'onde
de pression (IEC 62836:2024)
Ta slovenski standard je istoveten z: EN IEC 62836:2024
ICS:
17.220.99 Drugi standardi v zvezi z Other standards related to
elektriko in magnetizmom electricity and magnetism
29.035.01 Izolacijski materiali na Insulating materials in
splošno general
SIST EN IEC 62836:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62836:2024

---------------------- Page: 2 ----------------------
SIST EN IEC 62836:2024


EUROPEAN STANDARD EN IEC 62836

NORME EUROPÉENNE

EUROPÄISCHE NORM April 2024
ICS 17.220.99; 29.035.01

English Version
Measurement of internal electric field in insulating materials -
Pressure wave propagation method
(IEC 62836:2024)
Mesurage du champ électrique interne dans les matériaux Messung des inneren elektrischen Feldes in
isolants - Méthode de l'onde de pression Isoliermaterialien - Methode der Druckwellenausbreitung
(IEC 62836:2024) (IEC 62836:2024)
This European Standard was approved by CENELEC on 2024-04-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62836:2024 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62836:2024
EN IEC 62836:2024 (E)
European foreword
The text of document 112/627/FDIS, future edition 1 of IEC 62836, prepared by IEC/TC 112
"Evaluation and qualification of electrical insulating materials and systems" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 62836:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-01-03
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-04-03
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62836:2024 was approved by CENELEC as a European
Standard without any modification.


2

---------------------- Page: 4 ----------------------
SIST EN IEC 62836:2024




IEC 62836

®


Edition 1.0 2024-02




INTERNATIONAL



STANDARD




NORME


INTERNATIONALE











Measurement of internal electric field in insulating materials – Pressure wave

propagation method



Mesurage du champ électrique interne dans les matériaux isolants – Méthode

de l'onde de pression
















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE





ICS 17.220.99, 29.035.01 ISBN 978-2-8322-8338-7
...

SLOVENSKI STANDARD
oSIST prEN IEC 62836:2023
01-julij-2023
Merjenje notranjega električnega polja v izolacijskih materialih - Metoda širjenja
tlačnega vala
Measurement of internal electric field in insulating materials - Pressure wave propagation
method
Ta slovenski standard je istoveten z: prEN IEC 62836:2023
ICS:
17.220.99 Drugi standardi v zvezi z Other standards related to
elektriko in magnetizmom electricity and magnetism
29.035.01 Izolacijski materiali na Insulating materials in
splošno general
oSIST prEN IEC 62836:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 62836:2023

---------------------- Page: 2 ----------------------
oSIST prEN IEC 62836:2023
112/606A/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62836 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-05-19 2023-08-04
SUPERSEDES DOCUMENTS:
112/579/CD, 112/602B/CC

IEC TC 112 : EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATING MATERIALS AND SYSTEMS
SECRETARIAT: SECRETARY:
Germany Mr Bernd Komanschek
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
TC 15
Other TC/SCs are requested to indicate their interest, if any,
in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of
• any relevant patent rights of which they are aware and to provide supporting documentation ,
• any relevant “in some countries” clauses to be included should this proposal proceed. Recipients are reminded that
the enquiry stage is the final stage for submitting "in some countries" clauses. See AC/22/2007.

TITLE:
Measurement of internal electric field in insulating materials - Pressure wave propagation method

PROPOSED STABILITY DATE: 2027

NOTE FROM TC/SC OFFICERS:
This A-version CDV is circulated due to some texts in Figure-7 of 112/606/CDV were missing.
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 62836:2023
IEC CDV 62836 © IEC 2023 2 112/606A/CDV

1 CONTENTS
2 CONTENTS. 2
3 FOREWORD . 5
4 INTRODUCTION . 7
5 1 Scope . 8
6 2 Normative references . 8
7 3 Terms, definitions and abbreviated terms . 8
8 3.1 Terms and definitions . 8
9 3.2 Abbreviated terms . 8
10 4 Principle of the method . 9
11 5 Samples. 12
12 6 Electrode materials . 12
13 7 Pressure pulse wave generation . 12
14 8 Set-up of the measurement . 13
15 9 Calibrating the electric field . 14
16 10 Measurement procedure .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.