SIST EN 2591-6301:2004
(Main)Aerospace series - Elements of electrical and optical connection - Test methods - Part 6301: Optical elements - Endurance at temperature
Aerospace series - Elements of electrical and optical connection - Test methods - Part 6301: Optical elements - Endurance at temperature
This standard specifies a method of checking the ability of optical connection elements (including permanent connections) and fibre optic couplers to withstand elevated temperatures.
It shall be used together with EN 2591-100.
Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 6301: Optische Elemente - Temperaturbeständigkeit
Diese Norm legt ein Verfahren zum Nachweis der Widerstandsfähigkeit von optischen Verbindungselementen (einschließlich dauerhaften Verbindungen) und LWL-Kopplern gegenüber hohen Temperaturen fest.
Sie ist in Verbindung mit EN 2591-100 anzuwenden.
Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 6301 : Organes optiques - Endurance en température
La présente norme prescrit une méthode pour vérifier l'aptitude d'organes de connexion optique (y compris les connexions permanentes) et de coupleurs à fibre optique à résister à des températures élevées.
Elle doit être utilisée conjointement avec EN 2591-100.
Aerospace series - Elements of electrical and optical connection - Test methods - Part 6301: Optical elements - Endurance at temperature
General Information
- Status
- Published
- Publication Date
- 30-Apr-2004
- Technical Committee
- I08 - Imaginarni 08
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-May-2004
- Due Date
- 01-May-2004
- Completion Date
- 01-May-2004
Overview
EN 2591-6301:2001 - “Aerospace series - Elements of electrical and optical connection - Test methods - Part 6301: Optical elements - Endurance at temperature” - defines a test method to verify the ability of optical connection elements (including permanent terminations) and fibre optic couplers to withstand elevated temperature conditions. It is a CEN / AECMA aerospace test standard intended to be used together with EN 2591-100 (general test provisions).
Key topics and requirements
- Scope: Endurance testing of optical connectors and fibre optic couplers subjected to elevated temperatures; applies to specimens prepared per the applicable product standard.
- Specimen preparation: Fit specimens with normal accessories, terminate per product standard; unterminated cavities fitted with filler plugs; contacts connected in series and optical elements mated where applicable. Specify cable/fibre type and length, maximum insertion loss and allowable attenuation variation unless otherwise given in the product specification.
- Apparatus: Climatic chamber (plus equipment specified in EN 2591-301 and EN 2591-602).
- Test procedure:
- Use test method B of EN 2591-301 for specimens with optical contacts only; use test method A where both optical and electrical contacts are present.
- Connect specimens to the LLS and LDS systems and place in climatic chamber for the duration defined by the product standard.
- Continuously monitor variation of attenuation using EN 2591-602 (Method A) during the temperature exposure; attenuation variation attributable to the connection must not exceed values defined in the product standard while temperature changes.
- Recovery and final checks: Recovery per EN 2591-301. After testing perform:
- EN 2591-601 Insertion loss (Method 1)
- EN 2591-6101 Visual examination
- EN 2591-205 Housing (shell) electrical continuity (if applicable)
- EN 2591-6409 Contact retention in insert (if applicable)
Applications and users
- Intended for aerospace manufacturers, connector designers, test laboratories, quality assurance and compliance teams who must qualify optical connectors and fibre optic couplers for elevated-temperature environments.
- Useful for procurement and certification processes that require documented endurance testing of optical connection elements used in avionics, aircraft systems and aerospace installations.
- Supports product development, acceptance testing and periodic qualification of assemblies intended for harsh thermal conditions.
Related standards
- EN 2591-100 (General)
- EN 2591-301 (Endurance at temperature procedures)
- EN 2591-602 (Variation of attenuation)
- EN 2591-601 (Insertion loss)
- EN 2591-6101 (Visual examination)
- EN 2591-205 (Housing electrical continuity)
- EN 2591-6409 (Contact retention in insert)
Keywords: EN 2591-6301, endurance at temperature, optical elements, aerospace connector test, fibre optic couplers, insertion loss, variation of attenuation, climatic chamber.
Frequently Asked Questions
SIST EN 2591-6301:2004 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Elements of electrical and optical connection - Test methods - Part 6301: Optical elements - Endurance at temperature". This standard covers: This standard specifies a method of checking the ability of optical connection elements (including permanent connections) and fibre optic couplers to withstand elevated temperatures. It shall be used together with EN 2591-100.
This standard specifies a method of checking the ability of optical connection elements (including permanent connections) and fibre optic couplers to withstand elevated temperatures. It shall be used together with EN 2591-100.
SIST EN 2591-6301:2004 is classified under the following ICS (International Classification for Standards) categories: 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.
You can purchase SIST EN 2591-6301:2004 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Elements of electrical and optical connection - Test methods - Part 6301: Optical elements - Endurance at temperatureLuft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 6301: Optische Elemente - TemperaturbeständigkeitSérie aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 6301 : Organes optiques - Endurance en températureAerospace series - Elements of electrical and optical connection - Test methods - Part 6301: Optical elements - Endurance at temperature49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2591-6301:2001SIST EN 2591-6301:2004en01-maj-2004SIST EN 2591-6301:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2591-6301November 2001ICS 49.060English versionAerospace series - Elements of electrical and optical connection- Test methods - Part 6301: Optical elements - Endurance attemperatureSérie aérospatiale - Organes de connexion électrique etoptique - Méthodes d'essais - Partie 6301: Organesoptiques - Endurance en températureLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Prüfverfahren - Teil 6301: OptischeElemente - TemperaturbeständigkeitThis European Standard was approved by CEN on 4 June 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2591-6301:2001 ESIST EN 2591-6301:2004
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...