SIST EN 15425:2023/oprA1:2025
(Amendment)Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements
Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements
This document establishes a classification for one component polyurethane (PUR) adhesives according to their suitability for use in load-bearing timber products in defined climatic exposure conditions, and specifies performance requirements for such adhesives for the factory manufacture or factory-like manufacturing of load-bearing timber products only.
It also classifies “adhesive product lines” where all the products within the line have the same chemical composition except for a different amount of catalyst.
This document only specifies the performance of adhesives for use in an environment corresponding to the defined conditions.
The performance requirements of this document are applicable to the adhesives only, not to the manufactured timber products. This document does not cover the performance of adhesives for on-site gluing (except for factory-like conditions) or the production of wood-based panels, except solid wood panels, or modified and stabilized wood with considerably reduced swelling and shrinkage properties, e.g. acetylated wood, heat treated wood and polymer impregnated wood.
This document is primarily intended for use by adhesive manufacturers and for use in timber products bonded with adhesives, to assess or control the quality of adhesives. The requirements are applicable to the type testing of the adhesives. Production control activities are outside the scope of this document.
Adhesives meeting the requirements of this document are adequate for use in load-bearing timber products, provided that the bonding process has been carried out according to an appropriate product standard.
This document does not address the classification and use of adhesives in combination with the spraying of water before or during the bonding process; see informative Annex C of this document.
This does neither allow nor forbid the use of adhesives in combination with the spraying of water.
Klebstoffe - Einkomponenten-Klebstoffe auf Polyurethanbasis (PUR) für tragende Holzbauteile - Klassifizierung und Leistungsanforderungen
Adhésifs - Adhésifs polyuréthane monocomposants (PUR) pour structures portantes en bois - Classification et exigences de performance
Lepila - Enokomponentni poliuretan (PUR) za nosilne lesene konstrukcije - Razvrstitev in zahtevane lastnosti - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2025
Lepila - Enokomponentni poliuretan (PUR) za nosilne lesene konstrukcije -
Razvrstitev in zahtevane lastnosti - Dopolnilo A1
Adhesives - One component polyurethane (PUR) for load-bearing timber structures -
Classification and performance requirements
Klebstoffe - Einkomponenten-Klebstoffe auf Polyurethanbasis (PUR) für tragende
Holzbauteile - Klassifizierung und Leistungsanforderungen
Adhésifs - Adhésifs polyuréthane monocomposants (PUR) pour structures portantes en
bois - Classification et exigences de performance
Ta slovenski standard je istoveten z: EN 15425:2023/prA1
ICS:
83.180 Lepila Adhesives
91.080.20 Lesene konstrukcije Timber structures
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
EN 15425:2023
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
October 2025
ICS 83.180
English Version
Adhesives - One component polyurethane (PUR) for load-
bearing timber structures - Classification and performance
requirements
Adhésifs - Adhésifs polyuréthane monocomposants Klebstoffe - Einkomponenten-Klebstoffe auf
(PUR) pour structures portantes en bois - Classification Polyurethanbasis (PUR) für tragende Holzbauteile -
et exigences de performance Klassifizierung und Leistungsanforderungen
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 193.
This draft amendment A1, if approved, will modify the European Standard EN 15425:2023. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.