SIST EN 62769-5:2015
(Main)Devices and integration in enterprise systems; Field Device Integration - Part 5: FDI Information Model (IEC 62769-5:2015)
Devices and integration in enterprise systems; Field Device Integration - Part 5: FDI Information Model (IEC 62769-5:2015)
This part of IEC 62769 defines the FDI Information Model. One of the main tasks of the
Information Model is to reflect the topology of the automation system. Therefore it represents
the devices of the automation system as well as the connecting communication networks
including their properties, relationships, and the operations that can be performed on them.
The types in the AddressSpace of the FDI Server constitute some kind of catalogue, which is
built from FDI Packages.
The fundamental types for the FDI Information Model are well defined in OPC UA for Devices
(IEC 62541-100). The FDI Information Model specifies extensions for a few special cases and
otherwise explains how these types are used and how the contents are built from elements of
DevicePackages.
The overall FDI architecture is illustrated in Figure 1. The architectural components that are
within the scope of this document have been highlighted in this illustration.
Feldgeräteintegration (FDI) - Teil 5: FDI-Informationsmodell (IEC 62769-5:2015)
Intégration des appareils de terrain (FDI) - Partie 5: Modèle d'Information FDI (IEC 62769-5:2015)
L'IEC 62769-5:2015 définit le Modèle d'Information FDI. L'un des principaux objectifs du Modèle d'Information est de refléter la topologie du système d'automatisation. Il représente les appareils du système d'automatisation ainsi que les réseaux de communication connectés, y compris leurs propriétés, leurs relations et les opérations dont ils peuvent faire l'objet.
Naprave in integracija v proizvodnih sistemih; Integracija procesne naprave - 5. del: FDI informacijski model (IEC 62769-5:2015)
Ta del standarda IEC 62769 določa informacijski model integracije procesne naprave (FDI). Ena od glavnih nalog informacijskega modela je izražanje topologije samodejnega sistema. Zato predstavlja naprave samodejnega sistema ter povezana komunikacijska omrežja, vključno z njihovimi lastnostmi, povezavami in operacijami, ki jih je mogoče izvajati na njih. Zadevni tipi v naslovnem prostoru strežnika integracije procesne naprave sestavljajo nekakšen katalog, ki je sestavljen iz paketov vključitve procesne naprave. Osnovni tipi za informacijski model integracije procesne naprave so ustrezno opredeljeni v poenoteni arhitekturi OPC za naprave (standard IEC 62541-100). Informacijski model integracije procesne naprave določa razširitve za nekaj posebnih primerov ter pojasnjuje, kako se ti tipi uporabljajo in kako se vsebina zgradi iz elementov paketov naprave (DevicePackages). Celotna arhitektura vključitve procesne naprave je prikazana na sliki 1. Arhitekturni sestavni deli, ki spadajo na področje uporabe tega dokumenta, so poudarjeni na tej sliki.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62769-5:2015
01-november-2015
Naprave in integracija v proizvodnih sistemih; Integracija procesne naprave - 5.
del: FDI informacijski model (IEC 62769-5:2015)
Devices and integration in enterprise systems; Field Device Integration - Part 5: FDI
Information Model (IEC 62769-5:2015)
Feldgeräteintegration (FDI) - Teil 5: FDI-Informationsmodell (IEC 62769-5:2015)
Intégration des appareils de terrain (FDI) - Partie 5: Modèle d'Information FDI (IEC
62769-5:2015)
Ta slovenski standard je istoveten z: EN 62769-5:2015
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 62769-5:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62769-5:2015
---------------------- Page: 2 ----------------------
SIST EN 62769-5:2015
EUROPEAN STANDARD EN 62769-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2015
ICS 25.040.40; 35.100
English Version
Field Device Integration (FDI) - Part 5: FDI Information Model
(IEC 62769-5:2015)
Intégration des appareils de terrain (FDI) - Partie 5: Modèle Feldgeräteintegration (FDI) - Teil 5: FDI-Informationsmodell
d'Information FDI (IEC 62769-5:2015)
(IEC 62769-5:2015)
This European Standard was approved by CENELEC on 2015-06-24. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62769-5:2015 E
---------------------- Page: 3 ----------------------
SIST EN 62769-5:2015
EN 62769-5:2015
European foreword
The text of document 65E/348/CDV, future edition 1 of IEC 62769-5, prepared by SC 65E “Devices
and integration in enterprise systems” of IEC/TC 65 “Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN
62769-5:2015.
The following dates are fixed:
• latest date by which the document has to be (dop) 2016-03-24
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2018-06-24
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62769-5:2015 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC/TR 62541-1 NOTE Harmonized as CLC/TR 62541-1.
IEC 62541-7 NOTE Harmonized as EN 62541-7
2
---------------------- Page: 4 ----------------------
SIST EN 62769-5:2015
EN 62769-5:2015
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.