SIST EN IEC 61587-1:2022/oprA1:2025

SLOVENSKI STANDARD
01-oktober-2025
Mehanske strukture za električno in elektronsko opremo - Preskušanje za seriji
IEC 60917 in IEC 60297 - 1. del: Okoljevarstvene zahteve, preskusi in varnostni
vidiki - Dopolnilo A1
Amendment 1 - Mechanical structures for electrical and electronic equipment - Tests for
IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test setups and
safety aspects
Mechanische Bauweisen für elektrische und elektronische Einrichtungen - Prüfungen für
die Reihen IEC 60917 und IEC 60297 - Teil 1: Umgebungsanforderungen, Prüfaufbau
und Sicherheitsaspekte
Amendement 1 - Structures mécaniques pour les équipements électriques et
électroniques - Essais pour les séries IEC 60917 et IEC 60297 - Partie 1: Exigences
environnementales, montages d'essai et aspects liés à la sécurité
Ta slovenski standard je istoveten z: EN IEC 61587-1:2022/prA1:2025
ICS:
31.240 Mehanske konstrukcije za Mechanical structures for
elektronsko opremo electronic equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

48D/790/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61587-1/AMD1 ED5
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2025-08-15 2025-11-07
SUPERSEDES DOCUMENTS:
48D/789/RR
IEC SC 48D : MECHANICAL STRUCTURES FOR ELECTRICAL AND ELECTRONIC EQUIPMENT
SECRETARIAT: SECRETARY:
Germany Mr Arno Bergmann
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):

ASPECTS CONCERNED:
Safety
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Amendment 1 - Mechanical structures for electrical and electronic equipment - Tests for IEC
60917 and IEC 60297 series - Part 1: Environmental requirements, test setups and safety
aspects
PROPOSED STABILITY DATE: 2029
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

IEC 61587-1:2025 © IEC 2022
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MECHANICAL STRUCTURES FOR
ELECTRICAL AND ELECTRONIC EQUIPMENT –
TESTS FOR IEC 60917 AND IEC 60297 SERIES –

Part 1: Environmental requirements,
test setups and safety aspects
Amendment 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publ
...