SIST EN ISO 15482:2001

Overview

SIST EN ISO 15482:2001 is an international standard specifying the characteristics of cross recessed countersunk head drilling screws with tapping screw threads. These screws are designed to provide reliable fastening in sheet metal and other thin materials without the need for pre-drilled holes. Developed by ISO Technical Committee ISO/TC 2 on Fasteners and published by CEN, this standard provides uniform dimensions, mechanical properties, and tolerances ensuring interchangeability and quality.

The standard covers screw sizes from ST2.9 up to ST6.3 and defines key specifications such as thread pitch, head dimensions, and recess types. It harmonizes with related standards for threading, material finishes, and acceptability inspection, making it fundamental for manufacturers, designers, and quality inspectors in fastening technologies.

Key Topics

• Screw Type and Head Design:
  Cross recessed countersunk head for flush mounting and secure fitting. Two types of cross recesses-Type H and Type Z-are detailed in terms of dimensions and penetration depths.

• Thread Characteristics:
  Tapping screw threads specified from ST2.9 to ST6.3 sizes, conforming to ISO 1478 “Tapping screw thread.” The screws are self-drilling, eliminating the need for pilot holes and speeding up assembly processes.

• Dimensions and Tolerances:
  Detailed measurements for pitch, head height, thread length, and drilling range are provided in millimeters. Product grade A tolerances from ISO 4759-1 ensure consistency and reliability.

• Material and Finish:
  Typically made from steel, with electroplated coating processes covered under ISO 4042 to enhance corrosion resistance and surface durability.

• Mechanical and Functional Properties:
  Properties defined in ISO 10666 specify performance requirements, including strength and hardness, crucial for reliable tapping and load-bearing capacity.

• Acceptance and Inspection:
  Acceptance criteria and inspection procedures are aligned with ISO 3269, ensuring that fasteners meet the specified quality standards before deployment.

• Designation System:
  The standard provides a clear and concise way to designate these screws, such as “Drilling screw ISO 15482 - ST3.5 3 16 - Z,” which identifies thread size, length, and recess type for easy specification.

Applications

• Sheet Metal Assembly:
  Ideal for fastening thin metal sheets without pre-drilling, commonly used in appliances, HVAC ducting, and metal enclosures.

• Electrical and Electronics Housing:
  Facilitates secure and flush mounting of components and casings with minimal protrusion.

• Automotive Manufacturing:
  Used extensively for panel assembly where speed and reliability are essential.

• Construction and Building Equipment:
  Employed in fastening roofing materials, metal cladding, and light structural elements.

• General Manufacturing:
  Suitable wherever quick assembly with strong tapping screws is required, including furniture, lighting fixtures, and machinery.

The standardized dimensions and mechanical properties ensure interchangeability and maintain quality across different manufacturers and supply chains.

Related Standards

• ISO 10666 – Drilling screws with tapping screw thread: Specifies mechanical and functional properties applicable to these types of screws.
• ISO 1478 – Tapping screw thread: Defines thread profiles used in tapping screws.
• ISO 4757 – Cross recesses for screws: Covers recess sizes and configurations for compatibility with drivers.
• ISO 4759-1 – Tolerances for fasteners (Product grades A, B, C): Tolerance classes and quality guidelines.
• ISO 7721 – Countersunk head screws head configuration and gauging: Standardizes head shapes for flush fit.
• ISO 4042 – Fasteners - Electroplated coatings: Requirements for surface finishes and corrosion protection.
• ISO 3269 – Fasteners - Acceptance inspection: Inspection and quality assurance procedures to verify conformity.

These related international standards complement SIST EN ISO 15482:2001 by establishing comprehensive requirements for design, production, and quality control of cross recessed countersunk drilling screws with tapping threads.

By adhering to SIST EN ISO 15482:2001, manufacturers and users of cross recessed countersunk head drilling screws with tapping threads ensure high quality, consistent performance, and compatibility within global fastener supply chains, contributing to efficient and durable product assemblies.