SIST EN 934-2:2002/A2:2006

SLOVENSKI STANDARD
SIST EN 934-2:2002/A2:2006
01-maj-2006
.HPLMVNLGRGDWNL]DEHWRQPDOWRLQLQMHNFLMVNRPDVR±GHO.HPLMVNLGRGDWNL]D
EHWRQ±'HILQLFLMH]DKWHYHVNODGQRVWR]QDþHYDQMHLQREHOHåHYDQMH
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions,
requirements, conformity, marking and labelling
Zusatzmittel für Beton, Mörtel und Einpressmörtel - Teil 2: Betonzusatzmittel -
Definitionen, Anforderungen, Konformität, Kennzeichnung und Beschriftung
Adjuvants pour béton, mortier et coulis - Partie 2: Adjuvants pour béton - Définitions,
exigences, conformité, marquage et étiquetage
Ta slovenski standard je istoveten z: EN 934-2:2001/A2:2005
ICS:
01.040.91
91.100.30
SIST EN 934-2:2002/A2:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 934-2:2001/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2005
ICS 01.040.91; 91.100.30

English Version
Admixtures for concrete, mortar and grout - Part 2: Concrete
admixtures - Definitions, requirements, conformity, marking and
labelling
Adjuvants pour béton, mortier et coulis - Partie 2: Adjuvants Zusatzmittel für Beton, Mörtel und Einpressmörtel - Teil 2:
pour béton - Définitions, exigences, conformité, marquage Betonzusatzmittel; Definitionen, Anforderungen,
et étiquetage Konformität, Kennzeichnung und Beschriftung
This amendment A2 modifies the European Standard EN 934-2:2001; it was approved by CEN on 20 July 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 934-2:2001/A2:2005: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 934-2:2001/A2:2005 (E)
Contents
Page
Foreword .3
1 Modification in Clause 2 Normative references.4
2 Modification in 4.1 General requirements .4
3 Modification in 4.2 Requirements for specific types of admixtures.4
4 Modification in Table 3.2.4
5 Modification in Clause 6 Conformity control .4
6 Modification in Annex ZA, Table ZA.1, c
...